Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Fournier RF-5 Balsa-Plug n Fly-Skala Glider 1550mm

Fournier RF-5 Balsa-Plug n Fly-Skala Glider 1550mm

Discontinued Product

Please continue searching for a similar product.
Gewicht:
1805 g
SKU:
Fournier-RF5
WANT FREE SHIPPING? Click here to find out more!

Dieser große schau Fournier ist genau das Richtige für einen erholsamen Tage fliegen und ist Plug-and-Fly, dieser Sport Segelflugzeug Skala kann im Eiltempo in der Luft sein!

Die Zelle schön aus Balsaholz gebaut und dann fachgerecht abgedeckt, das Fournier nimmt die traditionelle Balsa ARF auf die nächste Stufe, werden nicht nur die Servos, ESC und leistungsstarke bürstenlose Motor enthalten, sie sind alle vorinstalliert! Der Vorteil des Plug-and-Fly-Format ist nicht nur die doppelte schnelle Aufbauzeit, es bedeutet auch, dass Sie an den Kopf machen Antriebsstrang Entscheidungen nicht kratzen, die perfekte Combo vorinstalliert ist! Dieses Modell ist sehr praktisch und nicht verfügt über nur einen abnehmbaren Flügel für den einfachen Transport, sondern hat auch eine große magnetische Baldachin für einfachen Batteriezugang, enthalten auch optional mit Allradfahrwerk ist jedoch kann das Fournier genauso einfach werden von Hand gestartet und Bauch gelandet für diejenigen, die aus mehr Gras fliegen.

Die große Spannweite dieser Größenordnung suchen Motorsegler bedeutet, dass es auf einem Hauch von Gas sanft geflogen werden, aber es öffnen und es gibt viel Kraft für beeindruckende Aufstieg aus der und sogar die ungeraden Schleife! Die Fournier ist ein schneller bauen, praktischen Maßstab Segelflugzeug mit der Art von Flugleistung und Haltbarkeit, die nur Balsa Flugzeuge anbieten können und das alles zu einem günstigen Preis!

Eigenschaften:
Schnelle Bauzeit
Plug-and-Fly-Format - einfach hinzufügen Reciever und Lipo! (Nicht enthalten)
Kann aus einer Vielzahl von Oberflächen geflogen
Steuerbare Spornrad
Effiziente 10 "Prop
Kann gemeinsame Lipo Akku 2200mAh 3s akzeptieren (nicht im Lieferumfang enthalten)
Fachmännisch Pre-Covered
Pre-Drilled Glasfaser Cowl
Qualität Klavierdraht Unterwagen

Eingeschlossen sind:
Anleitung
Stütze
Hook & Loop für Batteriemontage
Alle Hardware
Y-Lead

Specs:
Spannweite: 1550mm
Länge: 850 mm
Fluggewicht: 700 g
Servo: 9g x 4 ( im Lieferumfang enthalten)
ESC: 30A w / BEC ( im Lieferumfang enthalten)
Motor: BL2215 Brushless Outrunner 1200KV ( im Lieferumfang enthalten)

Benötigt:
Ihre eigenen 4-Kanal-TX / RX
1800mAh ~ 2200mAh 3s Lipo Akku

  • Artikelbezeichnung Fournier-RF5
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 1805.00
  • Länge 820.00
  • Breite 170.00
  • Höhe 235.00
  • Founier
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

plane arrived well packed, a little bit to well packed as wings have a nice curve, not twisted, just curved.

plane goes together well and looks good.

replaced self tappers on engine mount with nuts and bolts, checked and tightened engine bolts. checked hinges and added ca where required.

plane flew very well. looked fantastic in the air, flying low and slow.

if you like the look of this plane, buy it. at this price, it is a steal!
just give it a good going over!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

plane arrived well packed, a little bit to well packed as wings have a nice curve, not twisted, just curved.

plane goes together well and looks good.

replaced self tappers on engine mount with nuts and bolts, checked and tightened engine bolts. checked hinges and added ca where required.

plane flew very well. looked fantastic in the air, flying low and slow.

if you like the look of this plane, buy it. at this price, it is a steal!
just give it a good going over!

recieved plane yesterday 10.13.12 plane was in good shape accept the motor mount was broken which was not evedent until i picked up the fusaloge . at the wing tips where the wing turn up the covering is wrinkled and hard to shrink back down but a heat gun and some work it looks ok now havent flown yet but plan to this week

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

recieved plane yesterday 10.13.12 plane was in good shape accept the motor mount was broken which was not evedent until i picked up the fusaloge . at the wing tips where the wing turn up the covering is wrinkled and hard to shrink back down but a heat gun and some work it looks ok now havent flown yet but plan to this week

Great plane and flies well. The undercarriage needs atttention. Great landing and nice to "grease" in on landing. However, I need a new engine and can't find a replacement on HK. Anyone can help.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane and flies well. The undercarriage needs atttention. Great landing and nice to "grease" in on landing. However, I need a new engine and can't find a replacement on HK. Anyone can help.

The motor mounting disintegrated allowing the motor to rip the winding off - crash.
One aileron became detached on flight - crash.
The dihedral brace is far too small.
There are no spares available so the nose cowling is not replaceable.
I would give it a miss.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor mounting disintegrated allowing the motor to rip the winding off - crash.
One aileron became detached on flight - crash.
The dihedral brace is far too small.
There are no spares available so the nose cowling is not replaceable.
I would give it a miss.

I was surprised with the quality of this plane especially the covering. There were a couple of issues which one needs to be aware of. On my first take off I gave it heaps of throttle and the engine mount disintegrated, the motor spun in the cowling and the wires were so damaged I had to buy a new motor. I have now fitted a metal motor mount. On my second outing I hand launched and flew a few circuits before it started to dip violently left. On my landing approach about 2 m up it again violently dipped left and crashed. The left aileron had become detached. The CA hinges did not show much signs of glue. It would be better with pinned hinges.



It has big aileron control surfaces and I flew with 65pcnt Dual Rate. I had 70pcnt on the elevator and 80pcnt on the rudder. I had 30pcnt expo on all. Any more than this and I think you would be fighting it.



I fitted a red spinner for a more authentic look.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was surprised with the quality of this plane especially the covering. There were a couple of issues which one needs to be aware of. On my first take off I gave it heaps of throttle and the engine mount disintegrated, the motor spun in the cowling and the wires were so damaged I had to buy a new motor. I have now fitted a metal motor mount. On my second outing I hand launched and flew a few circuits before it started to dip violently left. On my landing approach about 2 m up it again violently dipped left and crashed. The left aileron had become detached. The CA hinges did not show much signs of glue. It would be better with pinned hinges.



It has big aileron control surfaces and I flew with 65pcnt Dual Rate. I had 70pcnt on the elevator and 80pcnt on the rudder. I had 30pcnt expo on all. Any more than this and I think you would be fighting it.



I fitted a red spinner for a more authentic look.

Nice plane good covering and built and strong motor.Down side is control horns change them.One servo twitcht so change all servos to htx 900 to be on the safe side.Maiden it today and it flew great was a bit to windy so flew not so long time.cg on the red white border may change it later.The plane realy looks great and did not put on the stickers.I like it clean.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice plane good covering and built and strong motor.Down side is control horns change them.One servo twitcht so change all servos to htx 900 to be on the safe side.Maiden it today and it flew great was a bit to windy so flew not so long time.cg on the red white border may change it later.The plane realy looks great and did not put on the stickers.I like it clean.

i agree with chrisr this is a very well designed plane and it went together perfectly but one thing to watch is the way you mount the rudder and elevator horns because the control rods come out differently so you must set them in the right place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i agree with chrisr this is a very well designed plane and it went together perfectly but one thing to watch is the way you mount the rudder and elevator horns because the control rods come out differently so you must set them in the right place.

, . HobbyKing !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

, . HobbyKing !

Finished my build. It's a really really nicely made aircraft, and I was pleasantly surprised. Out of the dozens of aircraft I've had and built, this is the first balsa/ply pre-built. Even the skin job was well done. Wings came straight as an arrow and the rest is really flat and nice. I added a loop/hinge at the base of the rudder to support the tail wheel... needed something there, or damage was waiting to happen.
With proper balance, and a Turnigy 2200 3s, there was no weights added, but the battery is mounted completely ahead of the main spar, and not in the tray slot as seen. I added a foam block behind the firewall and slide the battery in through the canopy, but into a fwd position. WITH battery, the flying weight is actually 890 grams, not the 700g they say. I put a GWS 1060 prop on it and it goes vertical anytime, no problems.
Also added radio mixing for the dual aileron servos, and that gets me flaps as well using the radio mix etc. Excellent plane, great job HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finished my build. It's a really really nicely made aircraft, and I was pleasantly surprised. Out of the dozens of aircraft I've had and built, this is the first balsa/ply pre-built. Even the skin job was well done. Wings came straight as an arrow and the rest is really flat and nice. I added a loop/hinge at the base of the rudder to support the tail wheel... needed something there, or damage was waiting to happen.
With proper balance, and a Turnigy 2200 3s, there was no weights added, but the battery is mounted completely ahead of the main spar, and not in the tray slot as seen. I added a foam block behind the firewall and slide the battery in through the canopy, but into a fwd position. WITH battery, the flying weight is actually 890 grams, not the 700g they say. I put a GWS 1060 prop on it and it goes vertical anytime, no problems.
Also added radio mixing for the dual aileron servos, and that gets me flaps as well using the radio mix etc. Excellent plane, great job HK!

Customer files
manual Download [3767]
MANUAL Download [3]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save