Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • USA

FPV 433Mhz Funktelemetrie Kit 100mW V1.1

FPV 433Mhz Funktelemetrie Kit 100mW V1.1

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
47 g
SKU:
9387000030-0

Combine

essential items and
acc
Product
Description

Diese Telemetrie Funkgerät ermöglicht es Ihnen, zu einem Flugregler wie unsere HK Pilot Mega 2.5 oder Multiwii AIO über einen USB-fähigen Gerät wie einem Computer, Laptop oder Tablet-Unterstützung eine USB-Verbindung (OTG) zu verknüpfen. Das Funkgerät können Sie nicht nur auf einer Karte überlagert Live-Daten wie Live-GPS-Position sehen zu Systemspannung, Überschrift, Wegpunkt navagation sogar künstlichen Horizont und so viel mehr (wenn der Fluglotse die GPS-Option), unter Verwendung von Open-Source-MAVlink basierend Bodenstation-Software. Sie können sogar Ihr Flugzeug mit einem Joystick über den Computer und Update-Einstellungen leben fliegen! Oder verwenden Sie sie nur für Ihre DIY Projekte, die eine drahtlose serielle Schnittstelle benötigt. Dieses Kit bietet eine große niedrigen Preis, eine größere Reichweite (ca. 1 Meile mit mitgelieferten Antennen) und überlegene Leistung. Das System nutzt die 433MHz-Band und bietet eine Vollduplex-Verbindung HopeRF HM-TRP-Module laufen benutzerdefinierte, Open Source, Firmware.

Der SIK-Firmware enthält einen Bootloader, der Radio-Firmware-Upgrades über die serielle Schnittstelle ermöglicht und die Konfiguration der Systemparameter. Firmware-Upgrades und Konfiguration sind in der APM-Mission Planer voll unterstützt. Die Konfiguration ist auch möglich, durch die 3DR Funk-Konfigurator und AT-Befehle.

Schnittstelle zum Modul ist über Standard-5V-tolerant TTL seriell / FT232 USB-Seriell.

Eigenschaften:
• Sehr geringe Größe
• Geringes Gewicht (unter 4 Gramm ohne Antenne)
• 433MHz Frequenzband
• Empfängerempfindlichkeit -117 dBm
• Sendeleistung von bis zu 20dBm (100mW)
• Transparente serielle Verbindung
• Luftdatenraten von bis zu 250 kbps
• Reichweite von ca. 1 Meile mit dem mitgelieferten Antennen
• Nachgewiesene Reichweite von mehreren Kilometern mit einer kleinen Antenne omni
• Kann mit einem bidirektionalen Verstärker für noch mehr Reichweite verwendet werden
• MAVLink Protokoll Framing und Statusberichte
• Frequency Hopping Spread Spectrum (FHSS)
• Adaptive Zeitmultiplex (TDM)
• Unterstützung für LBT und AFA
• Konfigurierbare Tastverhältnis
• Eingebauter Fehlerkorrekturcode (kann bis zu 25% Datenbit Fehler zu korrigieren)
• Open-Source-Firmware
• AT-Befehle für die Funkkonfiguration
• RT-Befehle für die Funkfernkonfiguration
• Adaptive Flusskontrolle, wenn sie mit APM verwendet
• Auf der Grundlage der HopeRF HM-TRP-Funkmodul, eine SiLabs SI1000 RF Mikrocontroller kennzeichnet.
• Upgrade auf Molex 1.25mm mehr überzeugen


Specs:
Band: 433MHz
Antennenanschlüsse: RP-SMA - Stecker
Ausgangsleistung: 100 mW (20 dBm), einstellbar zwischen 1-20dBm
Empfindlichkeit: -117dBm Empfindlichkeit
Schnittstelle: Standard - TTL UART
Verbindungsstatus: LED - Anzeigen


Eingeschlossen sind:
Radio-Telemetrie-Basisstation (USB-Verbindung)
Telemetrie-Transceiver (Pin Header)
Leitungssatz x1
Antenne x 2

Dieses Produkt basiert auf der 3DRadio Projekt von 3D Robotics.

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    9387000030-0
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    47.00
  • Länge
    100.00
  • Breite:
    20.00
  • Höhe:
    40.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This is a review of the "HK 433MHz Radio Telemetry Kit 100mW V1.1" that I received a couple of weeks ago. The shipment arrived quickly, well packed from the International Warehouse, well done Hobby King! Another nicely done order.

The product looked good, well done PC boards, great looking parts and assembly, and I had ordered the optional cases as well. They looked great also, fit well, and snapped on very snugly - I had to use a use a tool to snap them shut, great fit.

I found a video on You Tube that showed an Australian gent successfully pairing them up, and I followed it and had the same success. My Netbook with Mission Planner software and Quadcopter with HKPilot Mega 2.7 were talking up a storm!

It seemed prudent to check the antennas, having read much pro & con about them. It turns out they were were tuned somewhat low. I used my MFJ 269 for starters, and they were too low to read. The 269 only covers 420 to 470MHz, and they were below that range.

I borrowed a VIA ECHO 1000SF antenna analyzer from a company that I consult for, and the antennas were both resonant at about 380MHz, give or take. At 433MHz, one antenna had an SWR of 9.5:1, and the other was 7.5:1. Time to Tweak!

Using C-clip pliers, I spread the bottom of the "ducky" and lifted it off of the tilt base. That exposed the piece of coax soldered to the spring that is the antenna. That is what is in
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Be carefull if you are looking for long range. This item works well but at a maximum of 250 meters with supplied antennas. During gound distance test, the signal drops to zero after 100meters. Perhaps the antennas are not 433 Mhz (they are marked 2.4 Ghz but in discussions somebody says they are not 2.4 but 433, i have a doubt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Fantastic item, I use it all the time in all places and electronics. Nice n shiny finish, good covering
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I'm using these. And they are working fine. Range could be better though. I still need to verify the range of one mile. So far I lost connection before 100meters.
Antenna connectors could be stronger, I accidentally broke the antenna connector of the ground module during transport. (remove the antennas during transport)
Today I would choose the new version because then its easier to update the firmware.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works very well with APM2.5. Just plug and fly. Only minus is that updating the firmware on remote unit could be easier if you could plug the FTDI connector directly to the board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This kit is awesome, i have been using it for some time now. Its stable, its plug and play even in a MAC.

I will take away a star on antenna quality, both of my antennas sounds like something is loose inside. it does work, but a bad thing is a bad thing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived quickly , but as with so many of these 3dr clones , they came supplied with 2.4Ghz antennas and not the 433Mhz ones ,

I now have to source 433Mhz ones for this kit .

overall a good price despite the shortcomings.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These work very well for me. just plug and play. i have used them with my APM 2.5. works well with my samsung galaxy s3.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
?? ???????? ????????? 2.4??? ?? ?????? ????? ????????
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very useful Telemetry Kit. I use it with my HK AIO Board (MegaPirateNG). Pefect connection between Smartphone with DroidPlanner 2 and QuadCoptet. Quality is also good. Must buy!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.