Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

FPV 433Mhz Funktelemetrie Kit 100mW

FPV 433Mhz Funktelemetrie Kit 100mW

Discontinued Product

Please continue searching for a similar product.
Gewicht:
47 g
SKU:
9387000017
WANT FREE SHIPPING? Click here to find out more!

Dieses Radiotelemetrie-System ist als Open-Source-Xbee Ersatz Funkgerät entworfen, einen niedrigeren Preis, eine größere Reichweite (ca. 1 Meile) und überlegene Leistung zu Xbee Radios anbieten. Es ist erhältlich in 915MHz und 433MHz; und in den folgenden Konfigurationen: serielle Karte (für die Luft) und USB (für den Boden).

Das System verfügt über eine Vollduplex-Verbindung mit HopeRF HM-TRP-Module kundenspezifische, Open-Source-Firmware ausgeführt wird. Schnittstelle zum Modul ist über Standard-5V-tolerant TTL seriell / FT232 USB-Seriell.

Der SIK-Firmware enthält einen Bootloader, der Radio-Firmware-Upgrades über die serielle Schnittstelle und Radio-Firmware mit konfigurierbaren Parametern ermöglicht. Firmware-Upgrades und Konfiguration sind in der APM-Mission Planer voll unterstützt. Die Konfiguration ist auch möglich, durch die 3DR Funk-Konfigurator und AT-Befehle.

Eigenschaften:
• Sehr geringe Größe
• Geringes Gewicht (unter 4 Gramm ohne Antenne)
• Empfängerempfindlichkeit -121 dBm
• Sendeleistung von bis zu 20dBm (100mW)
• Transparente serielle Verbindung
• Luftdatenraten von bis zu 250 kbps
• Reichweite von ca. 1 Meile
• MAVLink Protokoll Framing und Statusberichte
• Frequency Hopping Spread Spectrum (FHSS)
• Adaptive Zeitmultiplex (TDM)
• Unterstützung für LBT und AFA
• Konfigurierbare Tastverhältnis
• Eingebauter Fehlerkorrekturcode (kann bis zu 25% Datenbit Fehler zu korrigieren)
• Nachgewiesene Reichweite von mehreren Kilometern mit einer kleinen Antenne omni
• Kann mit einem bidirektionalen Verstärker für noch mehr Reichweite verwendet werden
• Open-Source-Firmware
• AT-Befehle für die Funkkonfiguration
• RT-Befehle für die Funkfernkonfiguration
• Adaptive Flusskontrolle, wenn sie mit APM verwendet
• Auf der Grundlage der HopeRF HM-TRP-Funkmodul, eine SiLabs SI1000 RF-Mikrocontroller mit

Specs:
"Air" und "Boden" Varianten, FT232-Stil Pinout und USB-Anschluss, jeweils
RP-SMA-Stecker
Maximale Ausgangsleistung von 100 mW (20 dBm), einstellbar zwischen 1-20dBm
-117dBm Empfindlichkeit
Standard-TTL UART-Schnittstelle
Daten zu übertragen und den Verbindungsstatus LED-Anzeigen
Abmessungen (USB - Platine für Boden): 55x17mm
Abmessungen (Serial Board für Luft): 46x20mm
Gewicht (USB - Board für Boden): 7,5 g
Gewicht (Serial Board für Luft): 5,6 g

Dieses Produkt basiert auf dem 3DRadio Projekt von 3D - Robotik.

  • Artikelbezeichnung 9387000017
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 47.00
  • Länge 90.00
  • Breite 20.00
  • Höhe 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I did order this 433 telemetry as a spare part. Now my existing telemetry with APM2.5 is broken, so I did decided to use this HK 433 telemetry between APM2.5 and MissionPlanner, as with previous one. It worked only one time, with power = 11 as from stock. The range was really very short, like 25m. Then I decided to increase power to 20 and I did update firmware using firmware update from Mission Planer. Update was "Success", but now it try to connect (green led is continue), but not able to connect with APM, it stops ar 30pcnt.
Do you guy have a good experience with this telemetry? Any tips how to make it working?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I did order this 433 telemetry as a spare part. Now my existing telemetry with APM2.5 is broken, so I did decided to use this HK 433 telemetry between APM2.5 and MissionPlanner, as with previous one. It worked only one time, with power = 11 as from stock. The range was really very short, like 25m. Then I decided to increase power to 20 and I did update firmware using firmware update from Mission Planer. Update was "Success", but now it try to connect (green led is continue), but not able to connect with APM, it stops ar 30pcnt.
Do you guy have a good experience with this telemetry? Any tips how to make it working?

Struggled to get these to work with Mission planner at first, then realized they must connect at 57600, the APM's USB connection must also be unplugged. Updated and everything seems to work fine, I have not done a range check yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Struggled to get these to work with Mission planner at first, then realized they must connect at 57600, the APM's USB connection must also be unplugged. Updated and everything seems to work fine, I have not done a range check yet.

Plug and play setup with apm2.5. The range is only a few hundred feet, not nearly as far as 900mhz version out of the box. I think it needs a different antenna. Overall good buy works well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Plug and play setup with apm2.5. The range is only a few hundred feet, not nearly as far as 900mhz version out of the box. I think it needs a different antenna. Overall good buy works well.

Been using this on my H-quad, Works very well, Having one part on the quad and the other connected to my Nexus 7 Tablet. easy to connect to APM 2.5 , Have the OSD and Telemetry Kit working together.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Been using this on my H-quad, Works very well, Having one part on the quad and the other connected to my Nexus 7 Tablet. easy to connect to APM 2.5 , Have the OSD and Telemetry Kit working together.

Oh my good! that's incredible



I use It on my Crius AIO with Arduplane/Megapirate software



very good item for you telemetry stuff at an incredible price



Thankyou Hobbyking



Really a very good item

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Oh my good! that's incredible



I use It on my Crius AIO with Arduplane/Megapirate software



very good item for you telemetry stuff at an incredible price



Thankyou Hobbyking



Really a very good item

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!