Product Finder


Useful links

Shipped From:
  • USA
  • Global

FPV Racing Drone PDB mit OSD BEC für CC3D

FPV Racing Drone PDB mit OSD BEC für CC3D


Now save Speichern 0,00 € 0,00 €

10,27 €


10 g

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!


Diese Multifunktions FPV Drone PDB Für Ihre CC3D Flugregler wurde entwickelt, Rennleistung bereitzustellen und Zuverlässigkeit. Aktivieren einer knackigen, festen Stromversorgung zu Ihrer Wahl des WSA und auch Macht in und out für Kameras liefern, Sender-LEDs usw.

Strom kann von einem 2S zu 6S LiPo-Akku versorgt werden und unterstützt On-Screen-Austeller (OSD) Volt, Ampere, Timer & RSSI zu zeigen.

OSD unterstützt MWODS Firmware wie Cleanflight, Betaflight & Baseflight.

Dies ist ein kugelsicher PDB mit OSD für Ihre FPV Racing Drohnen.

• Stromverteiler + 5V / 12V BEC + OSD
• Unterstützung 2-6S Eingangsspannung
• 2 Unzen Kupferfolie, 4 Schichtplatten die Basis des großen Stroms zu sichern
• Dual BEC, 5V / 12V
• OSD-Funktion, Unterstützung KVteam MWOSD Firmware kommt mit FTDI
• Unterstützt OSD solche Grund Volt, Ampere, Timer & RSSI verfügt.
• 36 x 36 mm Größe, gleiche Montageloch wie Naze32, CC3D, SP3

Eingangsspannung: 5-24V DC (2-6S LiPo)
BEC: 5V / 2A & 12V / 2A umschaltbar
Maximale Ausschüttungsstrom: 70A Constant, 100A Burst
Maße: 36 x 36 x 4 mm
Befestigungslöcher: 30,5 x 30,5 mm M3 (Standard)

Gewicht: 7,3 g


Zusätzliche Information

  • Artikelnummer:
  • Brand:
  • Gewicht ( g)
  • Länge
  • Breite:
  • Höhe:

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I received the board fairly well packaged and flashed it with the latest MWOSD firmware as per specification. The board was flashed successfully, as well as programmed. Then it worked ok-ish for a couple of times. OK-ish, because the fonts were not displayed properly, but that might be the firmware's fault, not the board's.
Anyway, what seemed stupid, and yes it's a strong statement, but that's just hoew it is, because if you look at the first picture at the left hand side corner of the board, you'll she a tiny tiny component soldered very very close to the mounting hole. When you screw the standoff for the FC chances are you'll knock that component of it's pads. So really not very well thought layout. Other than that could be a fine board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is basically a very good product and an excellent value, but I must give it a low rating because of a build quality issue. The chip that does the OSD video overlay wasn't fully soldered to the board. Most of the chip's pins weren't soldered at all, resulting in a very flaky video signal (which I originally blamed on my video transmitter/receiver pair). I was able to fix the unit by soldering the missing connections under a microscope, but that's far beyond typical hobbyist capabilities. Most folks would have to return the product at their own expense, or worse, would suffer an in-flight failure. Examine the unit under a magnifier before installing it!

Once all the parts were properly soldered and the board was cleaned and dried (dish soap, hot water, and a toothbrush, followed by blow-off with dry air), the unit works well. I'm using the Minoposd firmware with LibrePilot loaded on the HK CC3D Mini.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload video

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
Manual (revised edition) download now [540.32Kb]


Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.