Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

FrSky FAS-100 Telemetrie Amperage Sensor

FrSky FAS-100 Telemetrie Amperage Sensor

Discontinued Product

Please continue searching for a similar product.
SKU:
236000007
WANT FREE SHIPPING? Click here to find out more!

Die FrSky Amperage Sensor (FAS-100) kann Strom messen (A), Stromverbrauch (mAh) und Leistung (W), wenn zwischen einer Batterie und ESC verbunden. Strom (A) und Leistung (W) auf dem FLD-02 angezeigt werden, während Strom (A) und Stromverbrauch (mAH) auf dem DHT-U angezeigt. Die FAS-100 meldet Leistung und Stromverbrauch ohne externe Spannungssensor und zusätzlich können zusammen einzelnen Zellenspannungen zu berichten, verknüpft werden, indem die FLVs-01 verwenden.


Specs:
Modell: FAS-100
Messbereich: 0 ~ 100A
Maximale sichere Strom: 100A
Sensorstromverbrauch: 33mA
Update - Rate: ≥1Hz
Dimension: 38x30x10mm
Gewicht: 24 g

  • Artikelbezeichnung 236000007
  • Brand FrSky
  • Kapazität ( mAh) -
  • Gewicht 38.0000
  • Länge 130.00
  • Packaging Width 16.00
  • Höhe 90.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have the FAS-100 connected to the Variometer and then the Variometer connected to my X8R via Smart-port. It works just fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have the FAS-100 connected to the Variometer and then the Variometer connected to my X8R via Smart-port. It works just fine.

It can be hooked in line with the voltage sensor and relays back the power, consumption, current and individual and overall voltage

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It can be hooked in line with the voltage sensor and relays back the power, consumption, current and individual and overall voltage

Dception. Le mien est arriv en panne. Lorsque je l'ai branch il s'est mis a fumer. un cas isol jespre

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dception. Le mien est arriv en panne. Lorsque je l'ai branch il s'est mis a fumer. un cas isol jespre

Very solid construction. PCB traces correctly designed to handle this power.

I think it's heavier than 24g declared but I don't have measured it.

Easy to install, just plug a connector directly on my D8R-II Plus (no sensor HUB) and I can immediately see Ampere in my FrSky FLD-02 (through DJT-II)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very solid construction. PCB traces correctly designed to handle this power.

I think it's heavier than 24g declared but I don't have measured it.

Easy to install, just plug a connector directly on my D8R-II Plus (no sensor HUB) and I can immediately see Ampere in my FrSky FLD-02 (through DJT-II)

Senzor k telemetrii FrSky na meren proudu do 100A

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Senzor k telemetrii FrSky na meren proudu do 100A

Superb item to use in all RC stuff. Cheap but top of the line system like Futaba. It just works. Buy with confidence.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Superb item to use in all RC stuff. Cheap but top of the line system like Futaba. It just works. Buy with confidence.

Dont buy this sensor it is a FAS-40 with shunt resistor that can only measure 40 Amps and can be purchased much cheaper than this else where.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dont buy this sensor it is a FAS-40 with shunt resistor that can only measure 40 Amps and can be purchased much cheaper than this else where.

I just received two FAS-100 that didn't work. The voltage was working but no current. After a lot of trouble I opened the shrink wrap and discovered it is only and FAS-40 with FAS-100 label. The BATT and ESC positions are reversed between these two sensors. When I revesed my connectors I saw I had a working FAS-40. I notified Hobbyking and they said thanks and that is all. This is terrible customer support. They didn't even offer to send me the proper sensors I ordered! Not to mention they should send out an advisory to anybody who recently bought FAS-100 to warn them they could have a fire if they put 100 amps through the erroneous 40 amp device.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received two FAS-100 that didn't work. The voltage was working but no current. After a lot of trouble I opened the shrink wrap and discovered it is only and FAS-40 with FAS-100 label. The BATT and ESC positions are reversed between these two sensors. When I revesed my connectors I saw I had a working FAS-40. I notified Hobbyking and they said thanks and that is all. This is terrible customer support. They didn't even offer to send me the proper sensors I ordered! Not to mention they should send out an advisory to anybody who recently bought FAS-100 to warn them they could have a fire if they put 100 amps through the erroneous 40 amp device.

PROBLEM WITH THAT WRONG CONFIGURED FAS ?? (SEE PICTURE "DEFECT FAS 100" IN THE FILES !
I have 2 Versions of these. The old one is working perfectly a FAS100. But the new one FAS 100 much smaller than the old one is not working from beginning. I opened a Request and make Videos for HK. They give the money back after control.
Than I opened the FAS100 and I was wondering, what I see. On the circuit board is written 40Ampere and not 100Ampere???? I bought a FAS100 !!! And a 40Amp FAS you cannot order/is not in the store from HK and not listed???? So from where is that product. Than I make recherches in Google and I find a FAS 40AMP in a specialised store for FR-SKY.
What is going on here with HK??? Is there nobody controling what they buy?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

PROBLEM WITH THAT WRONG CONFIGURED FAS ?? (SEE PICTURE "DEFECT FAS 100" IN THE FILES !
I have 2 Versions of these. The old one is working perfectly a FAS100. But the new one FAS 100 much smaller than the old one is not working from beginning. I opened a Request and make Videos for HK. They give the money back after control.
Than I opened the FAS100 and I was wondering, what I see. On the circuit board is written 40Ampere and not 100Ampere???? I bought a FAS100 !!! And a 40Amp FAS you cannot order/is not in the store from HK and not listed???? So from where is that product. Than I make recherches in Google and I find a FAS 40AMP in a specialised store for FR-SKY.
What is going on here with HK??? Is there nobody controling what they buy?

Finally the version without plug. I have soldered a pair of XT90 to it. Great stuff for a great price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Finally the version without plug. I have soldered a pair of XT90 to it. Great stuff for a great price.

  1. 1
  2. 2
Customer files
manual español Download [127]
Ordered FAS100 but got FAS40 also Download [558]
No File Name Download [1726]
IT IS NOT A FAS100 IT IS A FAS40A Download [330]
fas-100 frsky current sensor manual Download [167]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!