Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

FW190D Focke-Wulf 650mm w / Stand PNF

FW190D Focke-Wulf 650mm w / Stand PNF

Discontinued Product

Please continue searching for a similar product.
SKU:
HK-FW190-PNP
WANT FREE SHIPPING? Click here to find out more!

Die FW190D oder "Dora", wie es genannt wurde war die lange Nase Variante des FW190A "Butcher Bird", ohne Zweifel einer der besten Kämpfer des 2. Weltkrieges. Die lange Nase kam von der Substitution des ursprünglichen BMW-Sternmotor für den wassergekühlten Motor Jumo, um hohe Leistung zu verbessern, die mit einem leichten Verlust in niedrigem Niveau maneoverability erreicht. Obwohl für hohe Bomber Abfangen gedacht hatte Kämpfer so knapp mit der Zeit werden die FW90D zur Verfügung stand, mit dem "D" ausgestattet Staffeln wurden vor allem in der Kämpfer zu Kämpfer Kampf verwendet.

Der Hobbyking FW190D hat eine hervorragend geformten und zäh EPO Zelle, die eine erstaunliche Menge an Details für einen Parkflyern verfügt und wenn das nicht genug wäre, die umfangreichen gegossene Kunststoffteile, einschließlich der Lufteinlass, Pistolen, Abgas Stubs, zurückgezogen Spornrad und so auf wirklich von diesem wunderbar Skala kleines Modell beenden. Dieses "Dora" ist so schön, wir haben sogar ein Display-Ständer enthalten, die für die Kohlefaser Flügelholm in die Schreiner-Stecker!

Im Gegensatz zu einigen Modellen in Mini-Klasse, diese 190D von mehr in der Lage ist, als nur Flug zu skalieren, die vormontiertem Brushless-Motor hat viel Leistung für Kämpfer wie Aufstieg-outs und Kunstflug, die vormontiertem Servos sind eine perfekte Ergänzung für diese hervorragende Flug sie in der Lage zu machen, so viel mehr als nur eine Bank mit Yank fliegenden Mini warbird die Steuerung voll 4-Kanal verfügt. Dies ist eine exklusive Hobbyking Design & Produktion Modell von einer erstaunlichen Flugzeuge und führt es so gut wie es aussieht, ist es ein Muss für jeden Warbird-Enthusiasten, vor allem zu diesem Preis!

Specs:
Spannweite: 650 mm
Länge: 660 mm
Trockengewicht: 290 g
Motor: Bell - Brushless Outrunner 1200KV
ESC: 10A w / BEC
Servo: 9g x 3

Benötigt:
Ihre eigenen 4-Kanal-TX / RX
500mAh ~ 800mAh 2s Lipo Akku

  • Artikelbezeichnung HK-FW190-PNP
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 1443.0000
  • Länge 700.00
  • Breite 120.00
  • Höhe 310.00
  • FW190D Focke-Wulf 650mm w/Stand PNF
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This airplane have a big problem with the CG or need to balance with a lot of weight on the nose. After 3 crash, I broke 3 prop and my prop adapter. The foam is very tough but this airplane don't fly out of the box. I wait for more prop for more fly test.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This airplane have a big problem with the CG or need to balance with a lot of weight on the nose. After 3 crash, I broke 3 prop and my prop adapter. The foam is very tough but this airplane don't fly out of the box. I wait for more prop for more fly test.

This model is just what I expected. A small scale park flyer. The 2s 800mah batt was a perfect fit. Would have liked a little more room to move the electronics around, but everything fit nicely. Colors were nice and deep. Overall I am very pleased.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This model is just what I expected. A small scale park flyer. The 2s 800mah batt was a perfect fit. Would have liked a little more room to move the electronics around, but everything fit nicely. Colors were nice and deep. Overall I am very pleased.

I tried the FW and it seemed to have insufficient power to haul itself. I tested 36 amps using the equipped prop and new charged 2s. If this is 10 oz plane I would expect closer to 70 watts.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I tried the FW and it seemed to have insufficient power to haul itself. I tested 36 amps using the equipped prop and new charged 2s. If this is 10 oz plane I would expect closer to 70 watts.

Pretty ugly plane in the air and on display 2s battery not enough ,i put a 3s 1000 mAh and it really hauled a . Still was not real good to fly , bit of a handfull. Will try a different prop next time.Foam spinner works well in my pocket. Ok for display only.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty ugly plane in the air and on display 2s battery not enough ,i put a 3s 1000 mAh and it really hauled a . Still was not real good to fly , bit of a handfull. Will try a different prop next time.Foam spinner works well in my pocket. Ok for display only.

Just starting to get to grips with EPO this warbird after being used to EPP profile warbirds. Looks strange in air as starboard wing is warped upwards, would not look so strange if port wing matched. Its like a larger version of the old COX micro warbirds but with the addition of ailerons. First couple of flights were with 2s 500mA at about 30W. Changed to 3s 450 mA with 7x3.5 prop at 45W. Better but still managed to tip stall out of attempted loop and crashed verticaly into ground but model saved by larger EPO nose spinner acting as a cushion. Straightened creases with hot water and replaced shattered cowl with base from 125 ml E45 cream tub base. Tried again with standard motor fitted with original 7x6 on 3s and flew better but kept bending motor shaft on landing. Got fed up with straightening it so fitted Turnigy SK3 series 1275 kV 2826 (these are nice motors) propped down with a flexible 8x4.3 and 3s 1000mA at about 80W.
Flying on grass so have had to tape over leading edge joint between fuselage and wing to stop grass being wedged and ripping into join on landing. Also had to snip off cannons flush.
By the time you learn a model it can be battle weary, but saying that all my flights so far have been in windy weather. Will see what happens when the wind drops and I have had more time to play with the settings.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just starting to get to grips with EPO this warbird after being used to EPP profile warbirds. Looks strange in air as starboard wing is warped upwards, would not look so strange if port wing matched. Its like a larger version of the old COX micro warbirds but with the addition of ailerons. First couple of flights were with 2s 500mA at about 30W. Changed to 3s 450 mA with 7x3.5 prop at 45W. Better but still managed to tip stall out of attempted loop and crashed verticaly into ground but model saved by larger EPO nose spinner acting as a cushion. Straightened creases with hot water and replaced shattered cowl with base from 125 ml E45 cream tub base. Tried again with standard motor fitted with original 7x6 on 3s and flew better but kept bending motor shaft on landing. Got fed up with straightening it so fitted Turnigy SK3 series 1275 kV 2826 (these are nice motors) propped down with a flexible 8x4.3 and 3s 1000mA at about 80W.
Flying on grass so have had to tape over leading edge joint between fuselage and wing to stop grass being wedged and ripping into join on landing. Also had to snip off cannons flush.
By the time you learn a model it can be battle weary, but saying that all my flights so far have been in windy weather. Will see what happens when the wind drops and I have had more time to play with the settings.

Ein sehr schnes Modell.

Wenn man das Modell nicht unbedingt mit der Deutschen FW 190 vergleicht.

Ich fliege sie jetzt schon ein Weilchen und bin sehr Zufrieden.

Fr den Anfnger, der den Umstieg vom Segler auf etwas Rasanteres sucht ist sie hervorragend geeignet.

Der Fortgeschrittene Pilot wird sagen, dass der Motor ein wenig schlapp ist.

Der Original Akku gehrt ganz nach vorne, nur so kann das Modell vernnftig geflogen werden.

Die Focke Wulf 190 ist im Augenblick immer bei mir.

Fr den gemtlichen Feierabendflug oder mal eben fr den Stressfreien Flug zwischendurch finde ich sie 1A.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ein sehr schnes Modell.

Wenn man das Modell nicht unbedingt mit der Deutschen FW 190 vergleicht.

Ich fliege sie jetzt schon ein Weilchen und bin sehr Zufrieden.

Fr den Anfnger, der den Umstieg vom Segler auf etwas Rasanteres sucht ist sie hervorragend geeignet.

Der Fortgeschrittene Pilot wird sagen, dass der Motor ein wenig schlapp ist.

Der Original Akku gehrt ganz nach vorne, nur so kann das Modell vernnftig geflogen werden.

Die Focke Wulf 190 ist im Augenblick immer bei mir.

Fr den gemtlichen Feierabendflug oder mal eben fr den Stressfreien Flug zwischendurch finde ich sie 1A.

Pretty good plane for the price, I had some issues attaching the elevator and other small problems, not to mention the horrendous paint scheme, but everything seems to be working, will take it for a fly ASAP

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty good plane for the price, I had some issues attaching the elevator and other small problems, not to mention the horrendous paint scheme, but everything seems to be working, will take it for a fly ASAP

Good item in the complex . It replace in the light flight line my good old Eflite P40 overworked now. In fact, I really liked the Bf 109 but as the P40 the EPS sustain much less impact against the tall grass or landings in unprepared fields, scratching and ruining the model quickly although weaker points covered by special duct tape. The motor shaft protrudes much in front.. the spinner would be better if made of plastic also the cost of a few dollars more .. Terrible the tail NOT also made in EPO (EFP foam probably): sure will be the first to be replaced. Fun fast and stable enjoyed with 400ma -2s. With a bit of expo on trasmitter also good for those who have too much experience as long as flight high on the ground , with eagle' eyes (like all small model) so that you can recover it without the need for quick action. Passable but not truly the paint (left side fuse isnt present German cross too) Absolutely worth for little money spent

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good item in the complex . It replace in the light flight line my good old Eflite P40 overworked now. In fact, I really liked the Bf 109 but as the P40 the EPS sustain much less impact against the tall grass or landings in unprepared fields, scratching and ruining the model quickly although weaker points covered by special duct tape. The motor shaft protrudes much in front.. the spinner would be better if made of plastic also the cost of a few dollars more .. Terrible the tail NOT also made in EPO (EFP foam probably): sure will be the first to be replaced. Fun fast and stable enjoyed with 400ma -2s. With a bit of expo on trasmitter also good for those who have too much experience as long as flight high on the ground , with eagle' eyes (like all small model) so that you can recover it without the need for quick action. Passable but not truly the paint (left side fuse isnt present German cross too) Absolutely worth for little money spent

Great plane for the money. Mine flew fine on a Gforce 800 maH 2 cell, not brazing speed but fast enough for an easy launch, rolls and loops and scale flying. I'd guess faster than true scale. Battery fit fine in compartment provided and CG was perfect, even thought it is shown completely incorectly in the what passed for instructions. The rudder and spinner were broken off in the box but that was the only shipping damage in the double box. Everything worked out of the box, a first for my and HK. The paint scheme is very simple and uninteresting, and one decal is missing, so I added the decal and touched the paint up with a scheme copied from photos of various 190's and it looks great and is easier to see in the air now. I'd recommend this plane to any intermedate war bird flier. L think it a lot of model for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane for the money. Mine flew fine on a Gforce 800 maH 2 cell, not brazing speed but fast enough for an easy launch, rolls and loops and scale flying. I'd guess faster than true scale. Battery fit fine in compartment provided and CG was perfect, even thought it is shown completely incorectly in the what passed for instructions. The rudder and spinner were broken off in the box but that was the only shipping damage in the double box. Everything worked out of the box, a first for my and HK. The paint scheme is very simple and uninteresting, and one decal is missing, so I added the decal and touched the paint up with a scheme copied from photos of various 190's and it looks great and is easier to see in the air now. I'd recommend this plane to any intermedate war bird flier. L think it a lot of model for the money.

It arrived in perfect condition, however the cross decal on the back was missing. I Maidened her today and it flew well and it can fly at just above 1/2 throttle. The spinner is quite durable but has a tendacy to fall off after a crash. I suggest you replace The propeller with 7x6 Master airscrew propellers as the stock propeller is quite brittle.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It arrived in perfect condition, however the cross decal on the back was missing. I Maidened her today and it flew well and it can fly at just above 1/2 throttle. The spinner is quite durable but has a tendacy to fall off after a crash. I suggest you replace The propeller with 7x6 Master airscrew propellers as the stock propeller is quite brittle.

  1. 1
  2. 2
  3. 3
Customer files
HK manual FW190 Download [1354]
FW-190 In Flight Download [37]
FW-190 Fly by Download [57]
Custom Paint Download [631]
Custom Paint In Flight Download [296]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save