Neue Produkte Neuigkeiten Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Gee Bee-R3 1400mm EPO (PNF)

Gee Bee-R3 1400mm EPO (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
177000008
WANT FREE SHIPPING? Click here to find out more!

Es kann kein Zweifel sein, der Gee Bee R3 ist eine erstaunliche aussehendes Modell und diese große Größe Gee Bee hat eine fantastische Kunstflug sie den Kopf drehen Aussehen passen!

Aus robustem EPO-Schaum, ist dies R3 einfach und schnell zu montieren, zumal die Brushless Outrunner Motor, Regler und Servos sind bereits vorinstalliert. Eines der auffälligsten Merkmale des R3 sind die großen Radschuhe, diese verstecken sehr robust, Lage Unterwagen Bein und Räder montiert, die groß genug sind, um die gröbsten von Streifen mit Leichtigkeit zu bewältigen. Für den letzten Schliff und Flex zu minimieren, bietet das R3 leicht Stahl Rigging zu installieren, die perfekt ist Vorspannung mit freundlicher Genehmigung von den mitgelieferten Befestigungsfedern. Dies ist ein großes Modell für eine schaumige, aber es ist auch praktisch, die 1 PC Flügel ist für den einfachen Transport abnehmbar und die große Batterie Luke macht eine Brise Lipo tauschen!

Diese hervorragende suchen R3 ist ein echter Hingucker, es Präsenz in Pik hat sowohl auf dem Boden und in der Luft, ist es überraschend einfach aussieht fliegen und einfach toll, diese niedrigen n schnelle Pässe zu machen, aber wenn Sie beginnen, die Kunstflug zu erkunden Fähigkeit des R3, gibt es keinen Zweifel, werden Sie beeindruckt! Die neutrale Zelle macht Muster Stil eine Brise fliegen, Cuban 8s, knifedge geht, Split-S, Turns, usw. sind alle eine Freude, vor allem mit einer Ebene, die das gut aussieht, aber es ist wie auch einige Trainer artig, wenn gerade geflogen in der Schaltung! Dieses Gee Bee R3 ist ein brillanter Sportmodell, das für jedes Feld, seiner Größe gibt es jede Menge Präsenz geeignet ist, ist es extrem hart und fliegt hervorragend. Modelle, die diese erstaunliche sind oft Aufhänger Königinnen aussehen, nicht die R3, Leistung und Funktionalität sind in einer großen schauenden Sportflugzeug kombiniert, die gerade so viel Spaß zu fliegen und zu besitzen ist!

Eigenschaften:
Plug-and-Fly - Fügen Sie einfach Ihre Empfänger und LiPoly! (nicht enthalten)
Einfach und schnell zu montieren
Superb und Blickfang Looks
Tough EPO-Schaum
Heavy Duty Unterwagen und die großen Räder können jeden Streifen Tackle Fast
Herausnehmbare 1pc Flügel für den einfachen Transport
Große Größe mit Loads of Presence
Beeindruckende Kunstflug Leistung bei Docile Low Speed ​​Handhabung

Specs:
Spannweite: 1400mm
Länge: 1328mm
Fluggewicht: 2300g
ESC: 45A w / BEC
Servo: 9g x 2, 25g x 2
Motor: 3648 Brushless Outrunner Motor 600kv

Benötigt:
Ihre eigene 4 ~ 6-Kanal-TX / RX
2650mAh ~ 3300mAh 4s Lipo Akku

  • Artikelbezeichnung 177000008
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 3760.0000
  • Länge 1075.00
  • Packaging Width 245.00
  • Höhe 425.00
  • Gee Bee-R3 1400mm EPO
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ive been flying this plane stock, no mods. A little Fidely with the build concerning the undercarriage not seating flush. Not a big problem but considering the wheels and mounts are quite a large part of the plane. I've flown it with 2200 4s to 3000 4s mha batteries and the aircraft has plenty of power for the full range of aerobatics. I set the CG at 108mm and as some one else mentioned the battery is nearly all the way to the servo's. The pane seems a little tail heavy at this CG but doesn't overly effect the flying too much. I haven't noticed any tendency to tip stall at low speed. Flight times of 9 minutes with 15pcnt remaining. It does like a little power for landings. Overall I'm very happy with this plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ive been flying this plane stock, no mods. A little Fidely with the build concerning the undercarriage not seating flush. Not a big problem but considering the wheels and mounts are quite a large part of the plane. I've flown it with 2200 4s to 3000 4s mha batteries and the aircraft has plenty of power for the full range of aerobatics. I set the CG at 108mm and as some one else mentioned the battery is nearly all the way to the servo's. The pane seems a little tail heavy at this CG but doesn't overly effect the flying too much. I haven't noticed any tendency to tip stall at low speed. Flight times of 9 minutes with 15pcnt remaining. It does like a little power for landings. Overall I'm very happy with this plane

Very nice plane, and very easy to assemble. I am flying it on stock electronics, and it has plenty of power, and is easy enough fly, but needs to be landed under power, as it seems to have a tendency to tip stall. It is built for speed, as wing and ailerons do not appear to have sufficient area for successful 3d-ing. The tail wheel is miles to small for the weight of the plane, for me anyway, as I fly off very rough bitumen .... not really for the novice flyer, you would be better off with a full on 3d plane, as with low control settings, these are very easy to fly, and as a general rule, don't have tendencies to stall, and will float in for landings ...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice plane, and very easy to assemble. I am flying it on stock electronics, and it has plenty of power, and is easy enough fly, but needs to be landed under power, as it seems to have a tendency to tip stall. It is built for speed, as wing and ailerons do not appear to have sufficient area for successful 3d-ing. The tail wheel is miles to small for the weight of the plane, for me anyway, as I fly off very rough bitumen .... not really for the novice flyer, you would be better off with a full on 3d plane, as with low control settings, these are very easy to fly, and as a general rule, don't have tendencies to stall, and will float in for landings ...

Beautiful detailing on the plane, went together quickly except for the rigging which takes a bit of time to get adjusted. Very uneventful maiden, flew well out of the box. Able to do loops, knife edge and flat turns easily. All in all a very nice plane. Had it up for seven flights the first day off a grass field. The landing gear is quite rugged and handles the grass easily. I would definitely recommend the plane. The only mod I made was to make a tab with electrical tape to make removing the battery compartment cover easier.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beautiful detailing on the plane, went together quickly except for the rigging which takes a bit of time to get adjusted. Very uneventful maiden, flew well out of the box. Able to do loops, knife edge and flat turns easily. All in all a very nice plane. Had it up for seven flights the first day off a grass field. The landing gear is quite rugged and handles the grass easily. I would definitely recommend the plane. The only mod I made was to make a tab with electrical tape to make removing the battery compartment cover easier.

Gee Bee R3 is best Air Plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gee Bee R3 is best Air Plane

wonderful! such a huge airplane

very gentle in air, rubust build

i whould make the rear wheel a little bit bigger, it went out after 2nd landing

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

wonderful! such a huge airplane

very gentle in air, rubust build

i whould make the rear wheel a little bit bigger, it went out after 2nd landing

Trs bel avion ,belle finition il me tarde de le recevoir

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Trs bel avion ,belle finition il me tarde de le recevoir

A few flights in now and wow does this thing fly nicely! Really gets a lot of attention at the field. It is also surprisingly big! Takes off in about 10 feet if you want it to. Will cruise around at 1/3rd throttle very happily. I am using 3000 mah bats and after 5 min flights of mixed throttle usage only put about 1400 mah back in, so i'm sure 7 min flights aren't out of the question. The battery compartment is huge, so huge in fact that I have fit a 4500 mah pack in with ease!. Build quality is pretty good. My only gripes with the model are the way the tail wheel attaches to the rudder, The flying wires are slightly sloppy fitting ( loose but easily fixable) and that the elevator and ailerons don't have real hinges, just the foam join, although the plane does come with spare parts, to include a bag full of nylon or plastic hinges it would be nice if they were pre installed. A couple little things I would recommend. I put a light coat of finishing epoxy on the entire airframe. This not only protects the foam from little dings, dents and scratched, but also really brings out the color and ads a fantastic shine! Also, put heat shrink tubing on all of the points where the flying wires attach to the springs, this really helps keep them in place. In all I am VERY satisfied with this model

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A few flights in now and wow does this thing fly nicely! Really gets a lot of attention at the field. It is also surprisingly big! Takes off in about 10 feet if you want it to. Will cruise around at 1/3rd throttle very happily. I am using 3000 mah bats and after 5 min flights of mixed throttle usage only put about 1400 mah back in, so i'm sure 7 min flights aren't out of the question. The battery compartment is huge, so huge in fact that I have fit a 4500 mah pack in with ease!. Build quality is pretty good. My only gripes with the model are the way the tail wheel attaches to the rudder, The flying wires are slightly sloppy fitting ( loose but easily fixable) and that the elevator and ailerons don't have real hinges, just the foam join, although the plane does come with spare parts, to include a bag full of nylon or plastic hinges it would be nice if they were pre installed. A couple little things I would recommend. I put a light coat of finishing epoxy on the entire airframe. This not only protects the foam from little dings, dents and scratched, but also really brings out the color and ads a fantastic shine! Also, put heat shrink tubing on all of the points where the flying wires attach to the springs, this really helps keep them in place. In all I am VERY satisfied with this model

Have now flown the Gee Bee several times fly's really well however had slight rolling when no input from controls, after landing and close inspection noticed the elevator centre section was very weak and believe was twisting under load have now epoxied u shap piano wire to centre joint and looking forward to next flight ( hope hobby king take note of this could be dangerous ) suggest anyone buying this model check elevator for twist simple to put right before assembly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Have now flown the Gee Bee several times fly's really well however had slight rolling when no input from controls, after landing and close inspection noticed the elevator centre section was very weak and believe was twisting under load have now epoxied u shap piano wire to centre joint and looking forward to next flight ( hope hobby king take note of this could be dangerous ) suggest anyone buying this model check elevator for twist simple to put right before assembly.

I have recieved my Gee Bee R3 two days delivery, opening the box looks great, is now assembled and ready to go, so far seems fantastic value for money hope it fly's as good as it looks.
Problems encountered were assembly instruction photos not very clear, absolutely no info on the motor or ESC, ESC would not function so removed from the model is it programable ? is it bec or opto ? what max voltage would it take ?, also the motor is not marked at all so will it take a five cell lipo ?
On the verge of sending the ESC back as faulty my son said he had had the same problem and to adjust the travel to max on the throttle servo and now works perfectly, I wonder how many ESC's are sent back for being faulty when they are OK.
Just take your time assembling the model a lot of the plastic mouldings are handed, easy to stick them in the wrong place, close all the flying wire loops so the springs cannot come out and close all the spring hooks where required.
Foreseable problem if a wheel needs changing you will have to cut the side out of the spat to replace it, all in all really pleased with model so far

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have recieved my Gee Bee R3 two days delivery, opening the box looks great, is now assembled and ready to go, so far seems fantastic value for money hope it fly's as good as it looks.
Problems encountered were assembly instruction photos not very clear, absolutely no info on the motor or ESC, ESC would not function so removed from the model is it programable ? is it bec or opto ? what max voltage would it take ?, also the motor is not marked at all so will it take a five cell lipo ?
On the verge of sending the ESC back as faulty my son said he had had the same problem and to adjust the travel to max on the throttle servo and now works perfectly, I wonder how many ESC's are sent back for being faulty when they are OK.
Just take your time assembling the model a lot of the plastic mouldings are handed, easy to stick them in the wrong place, close all the flying wire loops so the springs cannot come out and close all the spring hooks where required.
Foreseable problem if a wheel needs changing you will have to cut the side out of the spat to replace it, all in all really pleased with model so far

C of G in the book is way off. C of G should be around 95mm from LE at fuz with the plane the right way up

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

C of G in the book is way off. C of G should be around 95mm from LE at fuz with the plane the right way up

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
geebee r3 kitaro Download [32]
geebee r3 kitaro Download [32]
668195303X158594X12.jpg Download [490]
668195303X158594X44.jpg Download [449]
chambley-air-loisir Download [182]
GeeBee Tail Mod Download [102]
Gee Bee Tail Mod 2 Download [106]
Gee Bee Tail Mod 3 Download [91]
No File Name Download [555]
R3_001 Download [102]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking