TPU98A Premium Silver 500g 1.75mm HobbyKing
TPU98A Premium Silver 500g 1.75mm HobbyKing
Print with strong, flexible filament to create spare parts, artworks and 3D models. TPU98A premium filament is easy to use for high-speed printing on both direct and Bowen style 3D printers. TPU98A filament has exceptionally high heat resistance (138℃) and can be stretched as far as 450% before reaching breaking point. TPU98A filament does not require the use of a heated bed and can even be printed straight onto glass.
TPU98A needs to be dried for the best 3D printing results. A standard air-circulated oven is sufficient. A guideline for drying is 2-3 hours at 110-130˚C for 100 gram (Please take care to remove the spool holding the filament as it will melt at much lower temperatures). The recommended temperature for the heated bed is 80-100˚C or even higher.
TPU98A will not bond perfectly to glass, but adheres well to a variety of “print stickers” and other bed adhesives. PA-CX12@df can be used on most common desktop FDM or FFF technology 3D printers.
Extremely flexible, the TPU98A filament can be used as vibration-dampers, prosthetics or even orthopedic insoles. Trust our premium TPU98A filament to create the best results every time. An excellent material choice for your next 3D printing project.
Features:
• Strong & Flexible
• Works on Direct & Bowden style 3D printers
• Printable at speeds of >75mm/s
• Exceptionally high softening point of 138°C
• 450% elongation at break
• Resistance to oils, greases & microorganisms
• Easily print watertight objects
Specs:
Width: 1.75mm
Weight: 500g
Colour: Silver
Tensile Strength at Yield: 50 MPa
Strain at Break: >150%
Tensile Modulus: 150 MPa
Flexural Modulus: 1700 MPa
Flexural Strength: 90 MPa
Impact Strength - Charpynotched 23˚C: 14 kJ/m2
Moisture Absorption: 3,5%
Printing Temper: 240-260°C
Melting Points: 250°C
Shore D Hardness: 81
Storage: Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly. HobbyKIng will supply this product with a moisture content <0,2%. After being out of the bag for several hours, redrying in an oven is recommended to eliminate moisture, please see method in the UPLOAD FILES tab.
Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren
Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren
Johannes | Verifizierter Käufer
-
Overall
-
Quality
-
Value
Really dissapointed
Jul 18, 2018
| TPU Drying Method | Download [168] |
Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!
