H-King T-45 (Kit) Glue-N-Go-Schaumstoff 700mm

• Overall
• Quality
• Value

Overall good

Aug 02, 2020

To achieve correct CG (10mm behind leading carbon spar)without lead I used a 2208 1250KV motor and a 3S 2200 mah battery. Ailerons are very sensitive around neutral, 12mm up and down with 40% expo. 10mm on Elevator. Be VERY careful to align the motor thrust when fitting the motor mount, very easy to misalign and add side or down thrust. Start with thrust neutral, fit prop and align by eye.its very sensitive and a potential disaster. Aileron and wing flutter needs to be checked at speed, I had both. It’s fast but has several flying vices, but hey it’s only foam board!

• Overall
• Quality
• Value

PRŮMĚR

May 29, 2019

VE NEBYL MANUAL- CG !!

• Overall
• Quality
• Value

not bad for the price

May 27, 2019

Goes together very easily with no major problems. I found out that if you are careful...very careful, you can use contact cement in place of the CA and it works great. Careful when hiding the motor wires, may have to punch new holes in the fuse. A little squirrely until trimmed, but otherwise it flies great.

• Overall
• Quality
• Value

Allgood, worth the $$'s needs a light powerfull little motor to help achieve CG!!!!

Feb 07, 2019

Flying weight 540grms, 50grms lead to get cg.....had to remove 2826 motor now 2810 pretty heavy, the manual says 415grms flying weight but obviously they never CG'd it

• Overall
• Quality
• Value

Goes together pretty good, much easier to build with hot glue

Feb 06, 2019

I used all the glues recommended, after I finished the build I decided it would have been a lot easier to do most of the glueing with hotmelt glue! the hobbyking epp/epo glue in the blue bottle takes a day or two to cure!! it's great stuff alright but takes your build longer....other than the tail area I recommend hotglue everywhere else, CG is 1cm behind the curved spar, it will need weights or a bigger battery to get the CG, I used a 2826 motor and being right at the back makes the cg harder to achieve......it also requires about 300mm long motor lead extensions! which you need to make yourself. anyway all parts fitted perfectly, this is my 5th glueNgo,, They all fly differently and are fun to build and fly :-)