Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

HD2613-1900KV Indoor / Profil / F3P Outrunner Motor

HD2613-1900KV Indoor / Profil / F3P Outrunner Motor

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
59 g
SKU:
HD2613-1900

Combine

essential items and
esc
acc
Product
Description

Diese kleinen, hervorragend Shock-Motoren bieten hohe Leistung und ein gutes Preis-Leistungs-Verhältnis. Handaufzug und ausgewogene diese superleichte Motoren sind fantastisch für die leichteste Licht Innen 3D-Profil und F3P Modelle. Ausgestattet mit 2mm vergoldete Kugel-Stecker und ein superleichter Kohlefaser Motor montiert diese Motoren sind bereit zu verschrauben und ausziehen!

Eigenschaften
Leichtbau.
Stark und leicht CF Motor montieren.
2mm Goldstecker vorinstalliert.
Built in Propsaver.

Specs.
RPM / kv: 1900
Ruhestrom: 1.0A
Lipo: 2 ~ 3s
Max Strom: 7.3A
ESC: 10A
Empfohlene prop: 8x4
Schub: 310g
Wellengröße: 3mm
Gewicht: 25,4 g (True Gewicht inklusive Kabel und Stecker)
Montage Abmessungen: 35mm x 35mm

Inklusive.
3 x 2 mm Buchse
2 x Propsaver Bänder
1 x CF Motorhalterung
3 x Pre-Cut Schrumpfschläuche

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    HD2613-1900
  • Brand:
    Nein
  • Gewicht ( g)
    59.00
  • Länge
    122.00
  • Breite:
    45.00
  • Höhe:
    55.00
  • Kv (rpm / v)
    1900.00
  • Max Currents (A)
    7.30
  • Leistung ( W):
    49.00
  • Länge B (mm):
    11.00
  • Kann Länge D (mm)
    7.00
  • Max Spannung (V)
    11.00
  • Welle A ( mm):
    3.00
  • Unit Weight (g):
    25.4
  • Durchmesser C (mm)
    26.00
  • Gesamtlänge E ( mm)
    25.00
  • Widerstand ( mh):
    0.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
great motor for the money, the carbon mount looks great and the power is perfect with a 8x4 gws prop on a 2 cell lipo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this motor on my overweight Matrix after using to much glue in my build. Stock motor would not hold a hover. Couldn't be happier with the performance of this new little motor.Now my Matrix can hover all battery long.
Thanks HobbyKing.
Now just for some windless days.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very impressed. I bought this about a year ago and installed it in a competitors 48" Super Cub and even though I was not sure if it would have the guts to get in the air, it sure did! I know this is not what this motor is for, but figured if it could hover a 32 profile it should putt putt a Cub around while being very lightweight and cheap. With an 8x4 prop on only 2s also! I have not yet tried 3s (because I don't have one small enough to fit). Motor stayed cool and even pulling around that big(for the motor) Super Cub for 7 minutes on almost full throttle in gusty wind before my 2s 950mah was down to 3.6v per cell. Motor came packaged adequately. Cub has heavy oversize rubber tires, cheap gyro from a competitor, spektrum 4ch rx, 10 amp plush esc, 4 5g servos, steerable tailwheel and this motor to fly... Which is smaller than the tires!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent motor, i'm using it on my Topmodel Kosmos with a weight of 190gr and it runs perfectly, i'm using it with an 8x4.5 with a 2s lipo, it use about 100mah x minute.
It is very well made as i can run it up to 9,8 Amps without getting it warmer then a normal fly and without damaging it :) ( i have limited the throttle to 50pcnt, as at 100pcnt it reach 12 A with the 8x4.5 )
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
works great. motor itself is balanced well. However, mine makes a strange kind of flapping noise at low throttle, like the sound youd expect from a leaf or twig caught on something. but it runs fine. ill clean it soon. it only made the noise after i took it apart for cleaning, maybe i got something in it. but otherwise, great little motor, runs cool on 3s with 8x4. Im thinking of balancing my prop much more precisely and then running it on 4s. If it doesnt over-heat, ill use it that way. but so far it is very hearty and strong. reccommend. i use it on an HK Reactor. well done HK
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have bought two of these so far, and am very satisfied. I installed one on a 32 inch Extra Slick and it has plenty of power using a 2S battery, but with a 3S it is a lot more fun. The only issue I had was that the supplied o-rings are not very strong. They are usable, but I had to use two to hold the prop on securely.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.