Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HKPilot Mega 2.7 Flight Controller-USB / GYRO / ACC / MAG / BARO

HKPilot Mega 2.7 Flight Controller-USB / GYRO / ACC / MAG / BARO

Discontinued Product

Please continue searching for a similar product.
Gewicht:
85 g
SKU:
387000051-0
WANT FREE SHIPPING? Click here to find out more!

Der neue HK PilotMega 2.7 ist ein frisches Aussehen und ein Umbau des beliebten APM basierten Flugregler. Im Laufe des ArduPilot Projekt und die Entwicklung der Open-Source-2.5-Plattform, haben einige bekannte Probleme und ergonomischen Herausforderungen zu verzeichnen. Das Ziel des HK PilotMega 2.7 war auf dieser großen Plattform zu beheben und zu verbessern, zurück in die Gemeinschaft ein Design zu geben, die verbessert und stabil ist und dennoch preiswert, so dass diese superstarken Flight Controller eine große steuerliche Option auf die 32-Bit-Varianten. Es gibt 5 große Verbesserung in der 2,7, und alle brauchen Bau Dateien unter der Registerkarte Dateien sind für die Gemeinschaft zu nutzen.

HK PilotMega 2.7 Verbesserungen:

1) 100UF Kappe in Vcc und 10uf Tantal - Kondensator hinzugefügt 3,3V schlecht Gyro Gesundheitsfragen zu stoppen

2) Der Ersatz des (nicht verwendet / redundant) 1.0mm 6p GPS - Port mit df13-4P I2C externen Kompass - Port, setzen die GPS und externen Kompass Ports nebeneinander, so dass für eine einfachere Verbindungen.

3) Multifunktions - MUX - Port hinzugefügt im alten I2C Port Lage, diese Benutzer eine Ausgabe von dem Bond - Pad auswählen können (UART0, UART2, I2C, OSD "Standard ist OSD". Dieses neue Layout - Datenübertragung stabiler mit einem Isolationswiderstand macht.

4) 3.3V und 5V Dataflash / Flashrom tauschte Spur Problem auf die AT45DB161 korrigiert.

5) Externe Kompass aktivieren / deaktivieren Jumper hinzugefügt, Verse eine Spur Draht zu schneiden zu müssen.

Die HKPilot Mega 2.7 basiert auf dem sich schnell entwickelnden und raffinierten ArduPilot mega oder "APM", ein Open-Source-Projekt von 3DR Robotik. Diese erstaunliche Flugregler kann der Benutzer jede Starrflügler, Drehflügler zu drehen, oder Multirotor-Fahrzeug (auch Boote und Autos) in ein vollständig autonomes Fahrzeug, in der Lage, eine breite Palette von Aufgaben selbst programmierten GPS-Missionen mit Wegpunkten (mit der Durchführung optionale GPS-Modul).

Verschiedene Benutzeroberflächen sind für die Programmierung, Überprüfung Protokolle, auch einige Apps für Smartphones und Tablets. Die optionale Telemetrie Radio ermöglicht Zwei-Wege-Funkkommunikation Ihnen die volle Kontrolle geben und Live-Daten zur Verfügung stellt auf Ihrem Computer oder Tablet zurück. Die Liste von dem, was diese Flug Controller ist in der Lage hat sich schnell übertroffen worden, was es nicht kann, mit Funktionen, Flugmodi und unterstützten Plattformen. Das APM-Projekt wird von Tausenden von Benutzern Drücken dieser Open-Source-Fluglotse zu sein, eine der besten Systeme unterstützt.

Eigenschaften:
• 3,3 V Ausgabe von "schlechten Gyro Heide" in der 2.7 behoben
• Anschlüsse für eine bessere Draht Layout verlegt
• Mux-Port hinzugefügt für OSD oder wählbare andere Ausgänge
• Dataflash tauschte Spannungsleitungen in der 2,7 fixiert
• Externe Kompass Jumper hinzugefügt
• Arduino Compatible
• Pre-gelötet und getestet
• 3-Achsen-Gyrosensor, Beschleunigungsmesser, Magnetometer und High-Performance-Barometer
• Eingebaute 4 MP Dataflash-Chip für die automatische Datenerfassung
• Honeywell HMC5883L-TR Digitaler Kompass
• Invensense des 6 DoF Accelerometer / Gyro MPU-6000
• Measurement Specialties MS5611-01BA03 barometrische Drucksensor.
• Atmel ATmega2560 und ATMEGA32U-2 (Verarbeitung und USB-Funktion).
• Micro-USB
• Externe Kompass-Unterstützung
• GPS-Eingang, I2C, Power-Modul-Eingang
• Telemetrie Radio, OSD und Luftgeschwindigkeit Sensoranschlüsse

Specs:
Abmessungen: 44x70x15mm (mit Gehäuse)
Gewicht: 32 g (mit Gehäuse)

Eingeschlossen sind:
HKPilot Mega 2.7
Anschlussleitungen x 5
Gehäuse und 3M doppelseitiges Klebeband

* Hinweis: Der Verweis auf APM bezieht sich auf das ArduPilot Projekt, eine Familie von Open - Source - Autopiloten auf der Basis des Arduino Open - Source - Computing - Plattform, die von 3DR und der Open - Source - Community entwickelt. Es besteht aus einer Auswahl von ArduPilot Mega (APM) Elektronik und eine Reihe von Software-Aktualisierungen für verschiedene Fahrzeuge und wird von einer Open-Source-Creative-Commons-Lizenz geregelt. Dieses Produkt ist auf dem Open-Source-APM-Projekt von 3D Robotics basiert, ist die CAD-Dateien pro der Creative-Commons-Lizenz unter der Registerkarte Dateien zur Verfügung.

* Hinweis: Dies ist kein Original Arduino Markenprodukt.

  • Artikelbezeichnung 387000051-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 85.00
  • Länge 110.00
  • Breite 45.00
  • Höhe 80.00
  • HK PilotMega 2.7
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This FC is awesome and loaded with features for the price. I consider myself a bad pilot and back when I did RC heli I quit doing it because cost from crashes was getting to high. This board with RTL (Return To Launch) has save my lots in what of been crashes. This board has built in gimbal control, gps hook up, etc. A lot for the money, but most important compatible with easy to use software with lots of online instructions.

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

We use this HK version in my College UAS course. We've tested this one verses the name brand that this is cloned from and don't see any difference between them related to setting up, programming or flying. For most students, we save a few dollars when we can, so this is the one the professor recommends the students to buy.

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works surprisingly well! Very stable flight. Easy to configure with APM Planner.

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great Board for the price. Maintains good position hold with a Quanum LEA-6h Gps. You must mount the controller to eliminate vibration,using foam etc. Using the Mission Planner software is straight forward,firmware I recommend no higher than v3.2 at this present time. Loses 1 star for having the cover screws on the bottom. A lot more practical if you could access them from the top. I'm new to the multi-rotor hobby and found it easy to use and customise. I'm a fan of open source!

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought this to replace my KK2.1 which I had outgrown in five months!!! Looked around at what was available, and really liked the APM model. The HKPilot Mega is a lot cheaper, but still has the same functionality as the real APM Mega. Have got this running faultlessly on my SK450 Deadcat with Q Brain 25A ESC. A few hiccups setting it up, but nothing that Google couldn't sort out for me. I have it running very, very stable with all the tricks ... Drift, RTL, Loiter, GPS, Compass. Really like the downloadable data files so that you can review the telemetry from each flight (not interested in real time stats, just yet). Seem to be getting more flight time out of this flight controller than the KK2.1 - 1 to 2 mins more.

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this on my DIY tricopter and works perfectly! Arrived with no problems. You will have to DIY a foam insulator for the barometer as no foam is provided. Screws are mounted from the base so a pain when you need to open the case when it's mounted on your multirotor. 2 jumpers in the HKPilot- one to be removed if your using the Power Module and another to remove when using an external compass. External Compass port is just below the GPS port unlike the 3DR board. Finish is good and soldering is neatly done. Comes with small bits of foam double sided tape, but I used my own tape instead.
Hooked up to Mission Planner without a glitch and firmware loaded with no issues. calibration via mission planner was troublefree! For the cost...Happy and Satisfied as my tri flies perfectly! Recommended!!

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My housing was a little warped making it difficult to put together initially. Otherwise really easy to get working

Awesome flight controller! You can do anything with this!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome flight controller! You can do anything with this!

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ho installato la scheda su un trex500, non facilissimo, arducopter la versione piu' difficile da mettere a punto, ma seguendo la guida on-line si riesce a metterla a sopperire. La scheda funziona molto bene ed assemblata con criterio, si noti che arriva senza un rigo di istruzioni. comunque 5 stelle.

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works very well even with the internal compass. If you use an external one, don't forget to remove the little jumper. Keep in mind that GPS port is 180 reversed in comparison to APM 2.5. To fit the correct pins you have to exchange every single wire to the opposite slot of the plug.

  1. 1
  2. 2
  3. 3
Customer files
Link to optical flow guide Download [10]
Optical Flow Pinout Download [126]
Powet Rails Download [253]
No File Name Download [20]
No File Name Download [99]
high res PDF of board schematic Download [49]
11x17 PDF of 2.7 schematic Download [47]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Manual HKPilotMega 2.7 V. APM2.6 Download [1352]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save