Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HKPilot Transceiver Telemetrie-Radio Set V2 (433Mhz)

HKPilot Transceiver Telemetrie-Radio Set V2 (433Mhz)

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

30,40 €
Status:
Auf Lager
SKU:
387000048-0
WANT FREE SHIPPING? Click here to find out more!

Diese neue V2 Telemetrie-Funkgerät ermöglicht es Ihnen, zu einem Flugregler wie unsere HKPilot Mega oder Multiwii AIO an einen USB oder Uart ausgestattete Gerät wie einen Computer, Laptop oder Tablet-Unterstützung eine USB-Verbindung (OTG) zu verknüpfen. Die neuen V2-Radios, haben nicht mehr eine separate Luft / Boden-Modul, da beide Transceiver Uart oder USB-Anschlüsse und unterstützt beide Modi verwenden können. Das Radio-Set können Sie nicht nur Live-Daten wie Live-GPS-Position auf einer Karte, sondern Systemspannung, Überschrift, Wegpunktnavigation sogar künstlichen Horizont und so viel mehr überlagert sehen. Mit Open-Source-MAVlink Basis Bodenstation-Software, können Sie sogar fliegen Ihr Flugzeug mit einem Joystick über den Computer und Update-Einstellungen live! Oder verwenden Sie sie nur für Ihre DIY Projekte, die eine drahtlose serielle Schnittstelle benötigt. Dieses Kit bietet eine große niedrigen Preis, eine größere Reichweite und bessere Leistung. Das System nutzt die 433MHz-Band und bietet eine Vollduplex-Verbindung HopeRF HM-TRP-Module laufen benutzerdefinierte, Open Source, Firmware.

Eigenschaften:
• Austauschbare Luft- und Bodenmodule
• Micro-USB-Anschluss
• 6-Position DF13 Stecker
• 100mW maximale Ausgangsleistung (einstellbar)
• -117dBm Empfangsempfindlichkeit
• Basierend auf HopeRF des HM-TRP-Modul
• RP-SMA-Stecker
• 2-Wege-Vollduplex-Kommunikation durch adaptive TDM
• UART-Schnittstelle
• Transparente serielle Verbindung
• MAVLink Protokoll Framing
• Frequency Hopping Spread Spectrum (FHSS)
• Konfigurierbare Tastverhältnis
• Fehlerkorrektur korrigiert auf 25% der Bitfehler up
Open Source SIK Firmware
• Konfigurierbare durch * Mission Planer und * APM-Planer

Specs:
Versorgungsspannung: 3,7-6 VDC (von USB oder DF13 Stecker)
Sendestrom: 100 mA bei 20 dBm
Erhalten Strom: 25 mA
Serielle Schnittstelle: 3,3 V UART
Größe: 25.5x 53x11 ​​mm (ohne Antenne)
Gewicht: 11,5 g (ohne Antenne)

im Lieferumfang enthalten:
Zwei Funkmodule mit Antennen 433Mhz
Micro-USB-Kabel
Android OTG-Adapterkabel
6-Leiter Pixhawk Anschlusskabel
6-zu-5-Position APM und PX4-Anschlusskabel

Frequenzregelungen variieren je nach Land, so fragen Sie Ihren Luftraum Behörde, um herauszufinden, welche Frequenz in Ihrem Gebiet legal ist.

* Hinweis: Der Verweis auf APM bezieht sich auf das ArduPilot Projekt, eine Familie von Open - Source - Autopiloten auf der Basis des Arduino Open - Source - Computing - Plattform, die von 3DR und der Open - Source - Community entwickelt. Es besteht aus einer Auswahl von ArduPilot Mega (APM) Elektronik und eine Reihe von Software-Aktualisierungen für verschiedene Fahrzeuge und wird von einer Open-Source-Creative-Commons-Lizenz geregelt.

* Hinweis: Dies ist kein Original Arduino Markenprodukt.

  • Artikelbezeichnung 387000048-0
  • Brand HKPilot
  • Kapazität ( mAh) -
  • Gewicht 123.0000
  • Länge 110.00
  • Breite 45.00
  • Höhe 80.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Ce produit est d'excellente qualite et fonctionne tres bien sur un pixhawk ou un APM 2.7
Tres satisfait
Merci Hobby King

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ce produit est d'excellente qualite et fonctionne tres bien sur un pixhawk ou un APM 2.7
Tres satisfait
Merci Hobby King

I found out that the promised output power of 100mW is not true.
I bought two sets (4 radios) and 3 of them have only 50pcnt (50mW) max. output and one 80pcnt.
I set the output power to max and measured.
So it seems you have to be lucky to get one of the better ones with at least acceptable 80pcnt output power.
I'm disappointed and this is not what I payed for.
After sending them back I got replacements, but it was the same, around 50pcnt output power so only half the range its suppose to have.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I found out that the promised output power of 100mW is not true.
I bought two sets (4 radios) and 3 of them have only 50pcnt (50mW) max. output and one 80pcnt.
I set the output power to max and measured.
So it seems you have to be lucky to get one of the better ones with at least acceptable 80pcnt output power.
I'm disappointed and this is not what I payed for.
After sending them back I got replacements, but it was the same, around 50pcnt output power so only half the range its suppose to have.

Work good, easy to wire up, good quality with long range.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Work good, easy to wire up, good quality with long range.

Used auto detect setting in Mission Planner and works fine. Good quality product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Used auto detect setting in Mission Planner and works fine. Good quality product.

WARNING !!!

Its not working, seems its may work on some installations, and other it does not. As long as HK is not providing any instructions stay away from it as it may be a waste of Money. The Modules do connect to each other, but they do not transmit any data.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WARNING !!!

Its not working, seems its may work on some installations, and other it does not. As long as HK is not providing any instructions stay away from it as it may be a waste of Money. The Modules do connect to each other, but they do not transmit any data.

Very nice product. Steal deal for the price. Comes with casings, antennae and all cables and even a double sided mounting tape! However there may be issues installing these and running them with Mission Planner (v. 1.3.7 is what I use).

My initial connection failed and I had to install FTDI drivers (http://www.ftdichip.com/Support/Documents/InstallGuides.htm) for WIN7 (Have also uploaded them). It then showed up on COM14 port and connected flawlessly. I now get live feed from my air module to ground. However, when I try to load settings or upload firmware, Mission Planner says "Failed to identify radio" or just "Failed". This is a big drawback as I cannot edit settings for the radio. However, do not worry, you can still fly with the radio! Would be good if HK uploaded help files for these radios, especially for newbies like me.

Will try to resolve it, and will post more on range checks later.

Good work HK!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice product. Steal deal for the price. Comes with casings, antennae and all cables and even a double sided mounting tape! However there may be issues installing these and running them with Mission Planner (v. 1.3.7 is what I use).

My initial connection failed and I had to install FTDI drivers (http://www.ftdichip.com/Support/Documents/InstallGuides.htm) for WIN7 (Have also uploaded them). It then showed up on COM14 port and connected flawlessly. I now get live feed from my air module to ground. However, when I try to load settings or upload firmware, Mission Planner says "Failed to identify radio" or just "Failed". This is a big drawback as I cannot edit settings for the radio. However, do not worry, you can still fly with the radio! Would be good if HK uploaded help files for these radios, especially for newbies like me.

Will try to resolve it, and will post more on range checks later.

Good work HK!

Hat sich problemlos installieren lassen. Die Reichweite liegt bei ber 1km. Ich bin begeistert.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hat sich problemlos installieren lassen. Die Reichweite liegt bei ber 1km. Ich bin begeistert.

Nice boxed telemetry set for all your APM or HK Pilot needs :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice boxed telemetry set for all your APM or HK Pilot needs :)

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save