Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

3A Hobbyking Einzel ESC Zelle - Brushed Micro Motors

3A Hobbyking Einzel ESC Zelle - Brushed Micro Motors

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

9,18 €
Status:
Auf Lager
Gewicht:
15 g
SKU:
BR3A
WANT FREE SHIPPING? Click here to find out more!

Die 3A Hobbyking Single Cell Brushed Motor Speed ​​Controller ist für einzelne Lithium - Batterie angetrieben Mikro RC - Modell konzipiert. Es ist extrem leicht und ist die perfekte Wahl für den Innen - Ultramikro Flugzeug und Hubschrauber. Durch die kontinuierliche 3A Stromfähigkeit, ist es die perfekte Wahl der breiten Palette Bürstenmotoren. Der ESC auch in Batterie Niederspannungsabschaltung und hohe Gas starten Schutz, integrierte Funktionen für den sicheren Betrieb zu gewährleisten. Es gibt keine integrierte BEC - Schaltung , da dies ESC mit einer einzigen Zelle arbeitet Lipo, RX Leistung daher bei 1s Spannung versorgt wird.

Technische Daten:
Netto - Gewicht: 0,4 g
Gewicht mit Kabel: 1.6g
Maße: 11,5 x 8,6 x 4 mm
Spannungsbereich: 2,6 ~ 5,5 V
Low Voltage Cut Off: 2,75 V
Max Kontinuierlich Strom: 3A
Max Spitzenstrom: 5A (3 Sekunden)

  • Artikelbezeichnung BR3A
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht ( g) 15.00
  • Länge 100.00
  • Breite 6.00
  • Höhe 75.00
  • Ornithopter w/ DSM2 RX and 3A, 1S ESC
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

bon petit esc sur un mini avion de 30grs

en 1s

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bon petit esc sur un mini avion de 30grs

en 1s

Perfecto! Works well!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfecto! Works well!

Should have heeded the warning. Bought first one which proved faulty as it cut off motor with almost fully charged battery. I know of HK's reputation for returns so I just tried again hoping to get lucky. Nope! same problem with the second one. Who else sells this type of ESC? Don't see them for sale anywhere. Out some cash and a lot of time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Should have heeded the warning. Bought first one which proved faulty as it cut off motor with almost fully charged battery. I know of HK's reputation for returns so I just tried again hoping to get lucky. Nope! same problem with the second one. Who else sells this type of ESC? Don't see them for sale anywhere. Out some cash and a lot of time.

le mien ne marche pas !!!! la soudure du signal etait soudée avec le plus il a pas aimé sans doute

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

le mien ne marche pas !!!! la soudure du signal etait soudée avec le plus il a pas aimé sans doute

awesome little speedy, set it up for rssi to convert from dig to analog for ezuhf to cyclops storm osd.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

awesome little speedy, set it up for rssi to convert from dig to analog for ezuhf to cyclops storm osd.

Low Voltage Cutoff is set above 4.0 volts which makes this useless as a 1S (1 cell) speed controller. I asked for a refund but I doubt that HK will give one. Overall it is a complete waste of money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Low Voltage Cutoff is set above 4.0 volts which makes this useless as a 1S (1 cell) speed controller. I asked for a refund but I doubt that HK will give one. Overall it is a complete waste of money.

Great little ESC that I've used in my indoor Shackleton, Lancaster, Hurricain and BN2 Islander

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little ESC that I've used in my indoor Shackleton, Lancaster, Hurricain and BN2 Islander

The motor is driven by a PWM frequency with a period of about 235us (the frequency is 4.255kHz). The minimum power width pulse is about 50us (the PPM signal width pulse is about 1200us). Full throttle power is delivered with a PPM signal width pulse of 2000us.
It's a pity that the ESC cannot deliver a PWM widht pulse lower than 50us.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The motor is driven by a PWM frequency with a period of about 235us (the frequency is 4.255kHz). The minimum power width pulse is about 50us (the PPM signal width pulse is about 1200us). Full throttle power is delivered with a PPM signal width pulse of 2000us.
It's a pity that the ESC cannot deliver a PWM widht pulse lower than 50us.

Rate actually ZERO crowns....

I have tried 4 of these BR3A esc's......all Faulty.
5 hours of Live Support from HK Product Specialists, they still do not work.
After help from another source, we find that the 0.510 ohm (1/2 ohm) labeled resistor, actually measures 510 ohms. 1000 times more resistance, big difference.
Until HK gets this defective batch of esc's out of their system, DO NOT buy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Rate actually ZERO crowns....

I have tried 4 of these BR3A esc's......all Faulty.
5 hours of Live Support from HK Product Specialists, they still do not work.
After help from another source, we find that the 0.510 ohm (1/2 ohm) labeled resistor, actually measures 510 ohms. 1000 times more resistance, big difference.
Until HK gets this defective batch of esc's out of their system, DO NOT buy.

Minr works fine but only over 4,3 Volts. That's a bit triky for 1S operation .. !! Might be faulty, or does anyone know how tot disengage the LVC?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Minr works fine but only over 4,3 Volts. That's a bit triky for 1S operation .. !! Might be faulty, or does anyone know how tot disengage the LVC?

  1. 1
  2. 2
  3. 3
Customer files
Terminal Identification Download [86]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save