Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Hobbyking DH Tiger Moth RAF 912mm (PNF)

Hobbyking DH Tiger Moth RAF 912mm (PNF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1870 g
SKU:
TigerM-Y-PNP
Product
Description

Die Tiger Moth kann am besten als Iconic beschrieben werden, wurde es von der sehr erfolgreichen Gipsy Moth und entworfen von Geoffrey de Havilland in den 1930er Jahren entwickelte Luftfahrtministerium Spezifikationen für eine neue Vorab Trainer für die RAF zu erfüllen. Die noticable Funktion, die die Tiger Moth von ähnlichen DH bi-planes unterscheidet, ist die unverwechselbare gefegt oberen Flügel, die einen besseren Zugang für einen Piloten erlaubt, während ein Fallschirm tragen. Die Tiger Moth ging auf sich zu einem großen Erfolg auf der ganzen Welt und wurde von mehreren Luftwaffen benutzt, ist es nicht von der RAF bis 1952 ersetzt wurde, als der DH Chipmunk-Service eingegeben, ist das "Tiggy" bis heute eine sehr beliebte Wahl mit den Piloten auf der ganzen Welt und ist bekannt, zu fliegen lohnend.

Diese Hobbyking Tiger Moth ist ein qualitativ hochwertiges, komplett im Haus Design & Entwicklung, die uns exklusiv ist. Aus robustem EPO, es ist einfach die meisten Skala Schaum Tiger Moth verfügbar und tropft nur in Form Skala Detail. reale Präsenz haben sowohl auf dem Boden und in der Luft, ist es die perfekte Größe für eine Schaum Skala BIPE Klein genug, um leicht und groß genug, zu transportieren. Sein Plug-and-Fly, der Motor, Regler & Servos sind vorinstalliert und ein großer Teil der Arbeit getan ist, aber es wäre fair zu sagen, dass ein wenig mehr Montagearbeiten als viele PNF Modelle erforderlich ist, was man von einem erwarten Doppeldecker.

Die Flugeigenschaften dieser Tiger Moth sind einfach hervorragend, werden Sie hart gedrückt werden, um eine Schaum-Modell zu finden, in seiner Klasse, es zu entsprechen. Die ausgezeichneten 9g Servos sind perfekt auf die Steuerflächen angepasst und die niedrige kv Motor perfekt auf die 10 "SF prop abgestimmt ist, die die Tiger Moth viel von Prop waschen über sie die Steuerflächen für eine bessere Kontrolle gibt, wenn in großem Umfang Geschwindigkeit geflogen. Gas geben und realistische Kunstflug ist eine Synchronisation sind, werden Sie nur nicht müde, dieses hervorragende maßstabgetreues Modell. der Hobbyking "Tiggy" hat alles, Qualität, Umfang Detail, Funktionalität, erstaunliche Leistung, Zähigkeit und besten aussieht, ist es ein muss für den Hänger haben jeder Größenordnung RC Piloten Enthusiasten.

Specs:
Spannweite: 912mm
Länge: 772mm
Flügelfläche: 24,2 g / dm 2
Flächenbelastung: 26 g / dm 2
Fliegen Gewicht: 620g ~ 680g
Servo: 9g x 4
ESC: 20A w / BEC
Motor: 28mm 1000kV
Prop: 10x4.7SF

Eingeschlossen sind:
Alle Hardware
Rigging Draht
Kleben
Anleitung
(Wasserschiebebilder voraufgetragenen)

Benötigt:
Ihre eigene 4-Kanal-TX / RX
1300mAh 3s Lipo Akku

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    TigerM-Y-PNP
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    1870.00
  • Länge
    965.00
  • Breite:
    120.00
  • Höhe:
    305.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
had my tiger moth yesterday looks good after a respray started the motor for a test run the rudder fell off fixed that next thing I tested was the ailerons one worked the one on the right had a funny turn and stopped working! had to replace the servo Hopefully when the weather get better I may be able to fly it
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Got my 912 mm yellow Tiger Moth 2 weeks ago started it today and finished 4 hours latter with help from my 12 year old. The kit had everything in the box less glues and tools it did have many of the issues other people have experienced. Fuselage not glued correctly tailskid broken away form the foam. However this is not a kit with a high premium and the issues are easy to sort out if you have built a few aircraft before. The build sequence is a little off in my opinion nothing really to grumble over and its really obvious. The hardware is cheap but functional and the servos worked fine. It has built into a really nice little model and the flying wires are well worth the effort. When finished it came out 100grams over the declared flying weight my only real criticism is, there is no mention of the flying control range of movements. Im going to go full range and dial in 50pcnt exponential unless some one has got a better idea. In summary cheap as chips and looks a lot better than it should and really easy build if you have any experience if not stay clear and start on something simpler.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well this plane has one definite fault that I warn you all to check before you fly it! The engine can easily come right off during flight! Yes you heard right "The engine can come right off during flight"! This is what took me from flying a rather nice moth, to sheer crashed and broken frustration! All because I forgot to Pre thread lock the engine mount screws prior to flying! I really stress don't go through the grief I encountered! The staff that installed the motor to the cowl have not done the engine mount screws up tight enough and/or have not appllied any thread lock to the engine screws! In fact (not just for this model) it's a good idea to do this with any electric model you purchase! Never trust the engine mount screws until you've tightened and Pre thread locked them thoroughly yourself! So is say DO yourself a massive favor (when you buy this nice value for cash model) and unscrew the engine mount screws and apply some Loc-Tight thread locker to the screws that lock the motor to the wooden cowl! Other than this I'm buying another (due to the value and no other faults) and this time round I'm definitely Pre- Thread locking the engine screws! It was such a good plane to fly until this unfortunate event happened! So remember what i'm saying here is very Important!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Is it normal to add nearly 8.0 oz to properly balance a plane? Beautiful model with plenty of power and now I have to ugly it up with half a pound of weights to get level flight. You would think that "for the money" it would be engineered a little better than that. Lower wing very thin at the worst possible point and very easy to break on a rough landing. Doubt I'll get another.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received my tiggy today, 4 shipping days after ordering it. Packaging was totally undamaged. All parts in good repair with and excellent finish. My only worry is that the lower wing is rather flimsy at the roots. Thinking about adding some carbon fiber spars. Will try a stock assembly and first flight as soon as the weather turns. February in Kentucky is rather windy. First impressions are good and for the price I doubt this model can be beat.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
recieved prompt delivery of a well packed little plane from Aus warehouse. All looked good but for the warp in lower wing, i intended to strengthen with CF rod anyway so will straighten then.
otherwise happy with purchase.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Arrived packed in plain cardboard outer box, undamaged. Opened and plain cardboard box inside with no illustrations of finished model. Opened that and there was the kit of parts, more of a 'park flyer' size than I was expecting but that's ok. One problem was that the tailskid was partly broken off the fuselage so some repair needed. I will add reinforcing at that area anyway. Also found no instructions in the box, assume there should be? Still, a simple model to build so with all the parts laid out should not be too much trouble to assemble. A tube of glue is supplied in the kit, and rigging wire which I probably will not use. Oh, also it says 'RAF' markings but as the pic on the website shows, and I knew anyway, it is actually Australian markings. On the back burner at the moment, may do some 'touching up' on the finished model. It could also do with a scale pilot to fill one of the cockpits. All in all a good basic model, and I do have a spare 'park flyer' rx doing nothing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi have just recieved this loverly scale model and I was verey pleased to see it is modeled on a Australian aircraft Hobby King you have done a great job with this modeldetail is verey good and only a fool would think other wise I have bought many models from hobby king and I am pleased with the aircraft I have bought

as I could not aforde to buy whate i have got know I can not wait to build her and add personal touches and can't waite to fly her

thanks againe H/K bloody good job
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice little biplane for the money - flys extremely well although mine needed a bit more weight up front to stop it pitching up all the time, otherwise it's a thumbs up from me, - might buy the blue variant when it's back in stock as this plane is an ideal size to chuck in the car and go for a quick fly before the wife gets home and starts handing jobs out!!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
After owning this for a while now, I thought I would give some more feedback, this flies much better with quite a bit of down and right thrust by using some plastic under motor corner. The difference is quite amazing and I am much happier now, b4 when I opened throttle full nose would come up and almost stall and pull hard to left when trimmed out at half throttle and when turn throttle off would dive to the right. This should really have been built into fire wall but as it's not BE WARNED and add the thrust lines and you will get a much nicer flier.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Hobbyking DH Tiger Moth RAF 912mm

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.