Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Hobbyking Piper J-3 1,20 Glow 2310mm (ARF)

Hobbyking Piper J-3 1,20 Glow 2310mm (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
1 g
SKU:
Piper J-3 Cub

Combine

essential items and
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo-Pack

    Turnigy 5800mAh 4S 25C Lipo-Pack

    Now save Speichern 48,62 € 48,62 €

    Special Price 4,28 € 4,28 €

    You save Speichern 48,62 € 48,62 €

    Was  52,90 €

  • Turnigy 5000mAh 4S 20C Lipo-Pack

    Turnigy 5000mAh 4S 20C Lipo-Pack

    Now save Speichern 9,40 € 9,40 €

    Special Price 24,42 € 24,42 €

    You save Speichern 9,40 € 9,40 €

    Was  33,82 €

servo
motor
Product
Description

Diese große Größe J-3 Cub wirklich das Teil aussieht, kommt es mit einem umfangreichen Hardware-Kit, das harte 1pc Vollmetall Skala und Arbeits Bungee-Fahrwerk, Motorattrappe, Tank & Armaturen und so weiter enthält. Die Verarbeitungsqualität der Zelle ist ausgezeichnet und es ist fachmännisch in einem authentischen Cub Yellow Film bedeckt.

Entwickelt um einen 1,20 Glühen, würde dieses Modell auch ein perfekter Kandidat für den Elektroflug sein aufgrund seiner einfachen Zugang ist, Flügeltüren auf beiden Seiten, so dass Lipoly eine Brise zu ändern. Der Flügel ist stecken, wie Sie mit schnell befestigen, echt aussehende Metall / Holzstreben erwarten. Das Fahrwerk ist hervorragend gemacht und gefederte Gummibänder verwendet, die einfach und kostengünstig verändert werden kann.

Dieser große Cub würde ein ideales erste groß angelegte Modell sowie ein guter Gleiter Schlepper machen, ist es robust und dennoch leicht, praktisch noch gut aussehend, nehmen Sie es von uns, wir wissen, ein oder zwei Dinge über Modell CUB! Es gibt eine ganze Menge von Modellflugzeug hier für das Geld, und mit der richtigen einrichten, bauen Kosten werden auch niedrig sein, kein Zweifel, das J-3 ist ein stehlen!

Specs:
Spannweite: 2310mm
Länge: 1500 mm
Fluggewicht: 5300G ~ 5400g
Flächenbelastung: 69g ~ 71g dm2
Airfoil: NACA-4412

Benötigt:
Ihre eigene 4-Kanal-TX / RX
5 x-Standard-Servo
.90 2-Takt oder 1,20 4-Takt Verbrenner oder 20cc Gas
RX Strom

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    Piper J-3 Cub
  • Brand:
    Nicht zutreffend
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    6560.00
  • Länge:
    1300.00
  • Breite:
    375.00
  • Höhe
    380.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
My J3 Cub just arrived yesterday, and i just had to open the box to make sure it was undamaged. First impression is that its a very high quality kit. For the money you cant go wrong. It's bigger than it looks and will be very impressive out on the field. Have ordered an ASP FS120 and HXT 10kg metal gear servos for it. Will post some pictures as i start the build.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have ordered one of these beauties. It will have the 160 brushless in it running on 6s lipo power. Should be powerful enough. Keep you posted
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Overall this gets 4 1/2 stars, only because of how well this flies. I have an ASP 91 4 stroke engine powering my Cub. The main wheels are terrible as is the tail wheel assembly. Get new ones of better quality. As with the other reviews the cowl and windscreen color is much darker than the covering but at 100 or so feet in the air this isn't noticeable. Main gear needs some longer bolts with self-locking nuts as the ones given will loosen after 2 or 3 flights. And, where can I get those rubber bands for the gear?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Finally got it completed and flew the Maiden flight. It is a very easy ground handler with no tendancy to ground loop on rollout. Takes very little right rudder for a straight track on take off. The ailerons and elevator is fairly responsive and do not require large throws. Very stable in flight with a mild wing drop at stall with full up elevator. It recovers easily and quickly. Even though this model is 12.5 pounds (5600 g) it glides forever when you cut power. Easy landings either with no power or slight power applied. Elevator and ailerons remain effective even at slow landing speed. I run this with a G110 electric brushless motor, a 60A ESC and a 6 cell 5000mah LiPo. Draws 23A (550W) with this setup and flys scale like. If you want lots of performance run a 8 cell LiPo with this setup and it will give you 38A at (1173 W). Lots of work to complete this ARF but overall its well worth the effort and you end up with a scale looking plane with great flight characteristics.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This kit is fantastic, with opening doors on both sides, there's plenty of room for cameras. Looking forward to getting this big bird in the air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well as I get into the assembly of this ARF (I agree with the other post- its much more assembly than the normal ARF) I find that it is very incomplete. My Plane is missing Assembly instruction sheets, There was no horns or clevises for the control surfaces, No bolts for the landing gear even though the blind nuts were pre installed, No screws to attach the cowl, No extra hinge for the rudder to fuselage. Although the pushrod tubes were pre-installed there were no pushrods or cable for the pull-pull rudder. Also the cowl and windscreen were painted a much darker yellow than the covering. The tiny little .40 size tailwheel was unusable and the Main Wheels were bomber style and hard as a rock, and way to small for this model - again unusable. Most significant is Hobby King is ignoring me on how to get this remedied.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
As I mentioned in the discussion section this is a beautiful Cub and very nice workmanship throughout. The manufacturer quality is lacking especially in packing. This particular ARF did not have any plans sheet or photos, The magnets and hardware for the doors were missing all together, The wire that connects the elevator halves together was missing as well. The wing tube fits very loosly in the tube installed in the fuselage. The painted cowl and trim on the windscreen are much darker yellow than the shrink covering and looks bad. The supplied wheels are very hard and unusable. This will be flown with a Turnagy G110 brushless and 6 cell LiPo. Ill post a flying review in a few days.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
BONJOUR QUI POURRAIS ME DIRE OU QUE JE POURRAIS TLCHARG LES PLANS DU PIPER CUB 2310 M MERCI A L AVANCE

MARIO .G
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Un 10 para esta semimaqueta, muy buen acabado y entelado, tiene cosas que se pueden mejorar, como la rueda de cola, pero realmente esta mas que bien por el precio. La recomiendo, perfecta para iniciarse en la gran escala, buen montaje y terminacion de las piezas, la presencia del avion es magnifica. En resumen los pequeos defectos que pueda tener se superan con creces con sus virtudes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Anyone know where i can purchase a wing set or the front cowl for this beauty?, Mines seem to have met the ground in an unforseen aeriel display ;(
Tried reglassing the cowl but still not happy with it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
  • Turnigy 5800mAh 4S 25C Lipo-Pack

    Turnigy 5800mAh 4S 25C Lipo-Pack

    Now save Speichern 48,62 € 48,62 €

    Special Price 4,28 € 4,28 €

    You save Speichern 48,62 € 48,62 €

    Was  52,90 €

  • Turnigy 5000mAh 4S 20C Lipo-Pack

    Turnigy 5000mAh 4S 20C Lipo-Pack

    Now save Speichern 9,40 € 9,40 €

    Special Price 24,42 € 24,42 €

    You save Speichern 9,40 € 9,40 €

    Was  33,82 €

servo
motor

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.