Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • USA

Hobbyking Quadcopter Control Board

Hobbyking Quadcopter Control Board

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
50 g
SKU:
QUAD-CON

Combine

essential items and
acc
Product
Description

Die lang erwartete und mit Spannung erwartete Hobbyking Quadcopter Steuerkarte ist endlich da!

Basierend auf dem beliebten und bereits gut KK Control Board unterstützt wird, ist die Hobbyking Quadcopter Steuerplatine Quadcopter Wahnsinn um die Massen mit seinen Durchbruch in der Qualität und Preis zu bringen!

Die Hobbyking Quadcopter Steuerplatine verwendet japanischen Piezokreiseln Murata, die weniger empfindlich gegenüber Vibrationen als SMD-Typ Gyros und verfügt auch über Stand der Fertigungs Kunst SMT Qualität zu gewährleisten. Dieses Board verwendet auch eine vom Benutzer programmierbare Atmega48PA IC.

Specs.
Größe: 50,5 mm x 50,5 mm x 23,5 mm
Gewicht: 14,5 Gramm
IC: Atmega48PA
Gyro: Murata Piezo
Eingangsspannung: 3.3-5.5V
Signal vom Empfänger: 1520us (4 Kanäle)
Signal zu ESC: 1520us (4 WSR)


Was ist ein Quadcopter Steuerkarte fragen Sie?

Der Hobbyking Quadcopter-Controller ist ein Flugsteuerungbrett für 4 Rotor Flugzeug (Quadrocopter). Sein Zweck ist es, das Flugzeug während des Fluges zu stabilisieren. Um dies zu tun es nimmt das Signal von der drei an Bord Gyros (Roll-, Nick- und Gier) übergibt dann das Signal an den Atmega48PA IC. Die Atmega48PA IC-Einheit verarbeitet diese Signale, die die Benutzer installierten Software nach und übergibt Steuersignale an die installierte Speedregler (WSR). Diese Signale anweisen, die WSR, um Feineinstellungen an die Motoren Drehzahl machen, was wiederum stabalises Ihre Quadcopter.

Die Hobbyking Quadcopter Steuerplatine verwendet auch Signale vom Funksysteme Empfänger (Rx) und leitet diese Signale an die Atmega48PA IC über die ail, ele, thr und rud Eingänge. Sobald diese Informationen der IC wird veränderliche Signale zu den WSR verarbeitet wurde senden, die wiederum die Drehzahl jedes Motors einzustellen, um einen kontrollierten Flug induzieren (oben, unten, rückwärts, vorwärts, links, rechts, Gieren).

Hinweis: Ein Benutzerhandbuch unter der Registerkarte Dateien zur Verfügung steht.

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    QUAD-CON
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    50.00
  • Länge
    45.00
  • Breite:
    10.00
  • Höhe:
    45.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
trs bien rien a dire , mon quadricopter vole trs bien et trs stable
je recommande
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
just got this item. Need help to install. How do I get to the user manual? it says this is in the file tab. Where's the file tab?

Any help appreciated and thanks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It blew a super product today, better than I expected output, expensive products seem to be no need to rope in the air, we strongly recommend you, my expectation is very balanced on the easy setting ..

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
sper rn bugn ucurdum tricopterimi,bekledigimden cok daha iyi cikti,havada ip gibi duruyor pahal rnlere hic gerek yok,siddetle tavsiye ederim,benim beklentimin stnde oldukca stabil ayar kolay..
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hi all, hk quad and this board flight prefectly ! a question, at eatch start, i need to put full in the corner left stick of my turnigy radio to activate the board (red led); is it ok or what should i do to avoid this manipulation ? i have already test to increase down trim at maximum. thanks, and long life to hk !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
buena pinta y perfectamente embalado. Estoy a la espera de motores y reguladores para probar su funcionamiento
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good electronic board. The setup is simple if you are methodical .... This is not my case so I took the time. after connected all the right thing here is what I did:
I)
1.Put the throttle in max position
2.Plug the battery
3.unlock the engines! Mode 1 ==> the left stick at the bottom right. If this does not work =>> you need reduce the throttle trim.
The red LED should turn solid.
http://www.youtube.com/watch?v=S0OMyrBqX8M
4.Wait the first series of beeps
5.put throttle in minimum position
===> the starter motor in sync.
II)
2.Check the direction of rotation of motor (Schematic of exit if you do not know)
3.verifier gain and follow the instructions if it is the wrong way ^ ^.
III)
1) once you were on your engine react logically to the propellers if not re-read the official manual ^^ .
2) if your machine Oscillate reduce the gain.
3) if the flight as a drunkard increase. ^ ^
NB ====> for MODE X instead of just turn ON the mix "ELEVON"
If this method does not work, or if something is missing read the manual.
Careful with propellers!!
A video of my quadricopter
= http://www.youtube.com/watch?v=S0OMyrBqX8M
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very good small control board ,workt very well right out of the box.
the price is really good as well :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I Put this on a kit quad from another company and loaded the latest x firmware. Google lazyzero for an excellent programming software tool. My programmer was the pocket avr from sparkfun. Easy as 123 even for a noob like me. Flies like it's on rails. I Couldn't be happier with this board.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice board, I have 4 flights with is. I just had to trim down power and invert yaw gyro and it flys!!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.