29%
OFFRed Arrows Hawk 105 mm EDF · ARF+
The unmistakable red livery of a British display jet, paired with an all-flying tail, sequenced landing gear and an ARF+ airframe built for your choice of EDF power system.
Red by design.
The vivid red fuselage, sweeping white stripe and red, white and blue tail echo the Royal Air Force Red Arrows. RAF lettering and roundels carry the display scheme across the airframe, giving it a distinctive profile on the ground and in the air.
From taxi to touchdown.
Strong retracts and steering
Three all-metal electric retracts use oleo struts, lightweight wheels and a sequencer for the gear and doors. A steerable nose wheel helps you line up on the runway.
Flaps and an all-flying tail
Functional flaps give you distinct approach configurations, while the all-flying horizontal stabilizers retain the Hawk’s characteristic control layout.
Day-bright scale lighting
Navigation LEDs and a nose light add visible scale detail during taxi, runway passes and approach.
Large airframe, easier transport
The 1.5 m wing gives the Hawk presence on the flight line. Removable wings and tail surfaces make it easier to transport and store without keeping the model fully assembled.
Aircraft specifications.
| Model | Avios Red Arrows Hawk 105 mm EDF ARF+ |
|---|---|
| Wingspan | 1,500 mm (59.1 in) |
| Length | Approx. 1,750 mm (69 in) |
| Weight | Approx. 6.0 kg without battery ; 7.0–7.1 kg flying weight |
| Controls | Ailerons, elevator, rudder, nose-wheel steering, flaps and retracts |
| Retracts | 3 all-metal electric units with oleo struts, lightweight wheels and sequencer |
| Digital metal-geared servos | 11: 5 × 25 g for ailerons, flaps and rudder; 5 × 12 g for steering and gear doors; 1 × 65 g for elevator |
| Lighting | Day-bright LED lighting supplied |
| Centre of gravity | 175–180 mm behind the leading edge at the wing root |
| EDF | 100-105mm EDF with inrunner |
In the box. What to add.
The ARF+ package supplies the scale hardware. The EDF, motor, ESC, flight batteries and radio equipment are not included.
Package Includes
- Main fuselage and separate nose section
- Left and right wings
- Left and right all-flying horizontal stabilizers and vertical stabilizer
- Canopy, wing and fin joiners, accessory pack and screw set
- Electric retract system with sequencer, digital servos and LED lighting
Required to Complete
- 8-channel or greater transmitter and receiver
- 100–105 mm EDF with motor; JP 105 mm unit
- 130–160 A HV ESC; Aerostar RVS G2 160 A
- 12S (44.4 V) 5,000–6,500 mAh LiPo , using two matching 6S packs in series
- Suitable LiPo charger
- Receiver power: A receiver battery; A BEC. Confirm the correct arrangement for your production unit.
Before the first flight.
Start with mid-flap.
Setting the flap control to mid-flap before first power-up. If a flap servo buzzes, strains or binds, disconnect model power immediately. Verify unobstructed movement at mid, full and retracted flap positions before flight.
Check balance and control travel.
Checking balance with the model inverted, the gear retracted and the battery installed. Confirm the settings for your aircraft before the maiden flight; do not combine the two sets.




































































































































































































