Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking Super H 600 QuadCopter (KIT)

Generating Links

Hobbyking Super H 600 QuadCopter (KIT)

Preis:

Now save speichern 0,00 € 0,00 €

38,93 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
366000012-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Sind Sie von Luftbildkamera Schiffe krank wie ein UFO suchen und fliegen langsam und glatt wie Sie Oma für einen Spaziergang um den Block sind zu nehmen? Hobbyking kommt zur Rettung mit Hilfe des neuen Super-H 600.

Der neue Super H 600 ist ein 600mm-Klasse Sport fliegen H Konfiguration quadcopter. Die optimale Layout ermöglicht alle Geräte sicher zwischen den Rahmenplatten und auf der Mittellinie für maximale Wendigkeit montiert werden. Der obere Rahmen hat Bestimmungen für 12 Schwingungsisolationskugeln so dass für Jello frei FPV und HD Videoaufnahme. Die Isolierung zugunsten einer sauberen und schmutzigen Teller können Sie auch straffer Flugregler PID-Werte für eine schöne enge wackelfreie Acromodelle haben. Die bewährten und leicht verfügbaren Waffen machen Ersatz im Falle eines "waghalsigen Schritt schief gegangen" einfach und billig. Der Rahmen-Layout kann eine breite Palette von Batterien und Geräte handhaben und hat Bestimmungen für Kamera und Montage kardanisch weiterleiten.

Wenn Sie für einen Spaß bereit sind und noch utilitaristisch quadcopter Super-H 600 übertrifft alle Erwartungen.

Eigenschaften:
• freie Sicht mit H Layout Prop
• Integrierte von Qualität Glasfaser und Polyamid Nylon.
• Pre-Gewindemessinghülsen für alle der Rahmenbolzen.
• Farbige Arme zur Orientierung, um Sie in die richtige Richtung fliegen.
• eloxiertes Aluminium-Hardware
• Haken und Stange Montageoptionen
• Große Montagelaschen am Hauptrahmen Bodenplatte für einfache Kameramontage.
• Einfache Montage
• Rückstellungen für eine saubere und schmutzige Schwingungsisolationsrahmen

Specs:
Motor zu Motor Diagonale: 600 mm
Gewicht: 599g
Motormontage: 16 ~ 19mm
Rahmenplattenlänge: 500mm

* Hinweis: Dieser Rahmenbestimmungen hat für bis zu 12 Vibrationskugel für einen sauberen und schmutzigen das Dämpfungssystem, kommt der Rahmen mit Aluminium - Abstandhaltern Standard. Die Schwingungskugeln werden separat verkauft und sollte geladen, je nach dem gegebenen Gewicht des oberen Rahmens gewählt werden.

  • HobbyKing Super-H Quadcopter Frame
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Fran vamo | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Calidad

May 25, 2020

very good value for money, value for money very good, support sheets somewhat thin but give good consistency, made lack of central support to house the controller and a power distribution tray, that would be very good, they would only have to redesign the center sheet of the frame.

Andreas | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2016

I used this frame for a short time, because the holes are done badly. With well balanced 15" props there are too much vibrations even for a gimbal!!! It's not stable at all. When you will use it, use it with small motors and 12" props max. The max flight time I got with it was 30min, but it wasn't a nice flying via fav, because of the vibrations I hardly could see anything!!!

Janaka | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

What a waste. You get what you pay for. I ended up with genuine CW props and knock-off CCW props, and the slight difference in thrust at the same motor RPM caused the frame and super flexible arms to twist and yaw the quad in circles. Though correctly matching props are clearly called for, the HUGE amount offlex in the arms and lower / dirty frame of this quad made it a complete waste of my time to build. My AUW was around 2.5kg - I tried to build this around a 6s 4000mah system and a mid-size gimbal and camera. I suspect this would only work with a GoPro and a lightweight setup.

jamie | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2015

Awful kit. Don't buy it. Very flimsy, not well machined. The frame is not symmetrical when assembled.

pat12 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 08, 2015

simple fantastic. i have not used this for long but it is my first Quad copter frame and i think that it has been a good one to chose. I have been using it on grass and it has suffered lots of accidents but all in all it was great and there is NO damage to the board. i would recomend you use the NTM Prop Drive 28-30S 800KV / 300W Brushless Motor (short shaft version) motors and the Afro ESC 30Amp Multi-rotor Motor Speed Controller (SimonK Firmware) ESC's with Slow Fly Electric Prop 12x4.5R SF (4 pc - Green Right Hand Rotation) propellers as well as left hand turning ones and a 4 cell battery for me this set up has worked great. thanks for reading this, cya

Tarek | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 04, 2015

You pretty much get what you pay for. I've ordered this frame before and it was beside one drill hole fine. The second was missing all the drill holes for the rubber balls. Not a big deal for me. And the rest of the frame is descent and if you crash it (like I did), the replacement is not that big of a deal. I recommend this frame.

Zebolc | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 19, 2015

This is nice big frame with a lot of space on it and it is cheap.
However it has few drawbacks:
- it is heavy, 500g
- arms could be longer, they can fit maximum 13" props
- little too elastic for my taste
- plates are made of tick plexiglass (12.5mm) instead of carbon fiber
- there are no hols for rubber dumpers, and once you drill it your self those holes violate structural integrity of plates
- holes made for gears on plates are made in a way that makes you difficult to attach some of your gears so you have to improvise

All 4 arms are black but I like it that way, it looks cool, and if you want better orientation you can put some colorized LEDs.
I have put some pictures in file section of my build. I'm using Multistar Elite 4007.740 motors, 12" 5.5peach propellers, 4.5Ah 3s battery, Crius v2 FCB and 20A Afro Slim ESC. total weight is 1750g, but I plan to add one more 4500mAh battery and d13" 5.5peach props. That should give me 15 minutes of flight time with good maneuverability.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 14, 2015

This is a great frame. I have 14 inch blades on this build. If you do Use 14 inch props you will be cutting in close but still it makes for a nice long flight time! I suggest the use of m3x11MM vibration isolation grommits! They fit well! Enjoy!

Maksim | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 13, 2015

2210 turnigy

DodgeHobby | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2015

A lot of gear for little money!

Nice easy build, some spares in mine (I hope they're spares!) And plenty of room. SJ400, APM GPS, 4x ESCS, FrSky Rx, FPV cam, Vtx and batt. And enough room to fit it all on again.

  1. 1
  2. 2
  3. 3
Kundendateien
No File Name Download [3519]
folding version Download [476]
folding version Download [476]
folding version Download [476]
perfectly tuned and tested build i have Download [391]
front view of gimbal mount with out cont Download [3130]
top view of just mounted gimbal Download [2969]
side view of my gimbal mounting system Download [3438]
Quad Just built and flown Download [558]
No File Name Download [3035]
  1. 1
  2. 2
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör