Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking Wireless-Batterie Tracker w / Free Batterie 869.5Mhz

Generating Links

Hobbyking Wireless-Batterie Tracker w / Free Batterie 869.5Mhz

Preis:

Now save speichern 0,00 € 0,00 €

28,81 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
HK-Traker8695
Kostenloser Versand? Klicke hier um mehr zu lernen!
Ich wünschte, Sie könnten Ihre Lipo Batteriespannung kennen, während Sie fliegen?
Wollen in der Lage sein, genau zu wissen, wann Ihre Packung etwa ist Spannung zu fallen?

Die Neu - & - Verbesserte Hobbyking drahtlose Batterie-Tracker überwacht Ihre LiPoly über den Ladestecker und sendet ein Signal an den Empfänger zurück. Sollte einer Ihrer Zellen fallen unter 3,6 V die LED für diese Zelle wird rot. Sobald die Zelle unter 3 V die LED fällt, blinkt und der Warnsummer gibt einen Piepton signalisiert Ihnen so schnell wie möglich zu landen.
Dieses Gerät ist auch eine gute Möglichkeit, die Batterien zu finden, die Spannung stark unter Last fallen.
Der Sender arbeitet auf 869.5Mhz FM-Band und kann 2S 6S Batterien überwachen.

Spec.
Transmitter Gewicht: 7 g
Receiver Gewicht: 35g (das ist der Teil, den Sie in Ihrer Tasche halten)
Signalabstand: Rund um 300-400mtr
Batterie: 7.4V / 2 Zelle (im Lieferumfang enthalten)
Verwendung;
Sicherstellen, dass der Hand Empfänger eingeschaltet ist und Sie die Anzahl von Zellen zuerst ausgewählt. Sobald dies geschehen ist, schließen Sie dann den Sender in der Ebene auf die Batterien Balance Stecker. Wenn Sie in dieser Reihenfolge tun es nicht tun, wird das Lesen nicht korrekt.
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

giovanni | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 22, 2012

prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge

johnno | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 27, 2012

A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.

Kunde | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Feb 24, 2011

I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money

Anthony | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 12, 2010

Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.

isaac509 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.

Sunwalker | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 03, 2010

Funktionier ganz gut etwas mehr reichweite wrde nicht schaden

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 30, 2009

Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer

Valek | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2009

On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 18, 2009

I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.

TERRY270 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 11, 2009

Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.

  1. 1
  2. 2
  3. 3
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!