Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • USA

Hobbyking Wireless-Batterie Tracker w / Free Batterie 869.5Mhz

Hobbyking Wireless-Batterie Tracker w / Free Batterie 869.5Mhz

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
129 g
SKU:
HK-Traker8695
Product
Description
Ich wünschte, Sie könnten Ihre Lipo Batteriespannung kennen, während Sie fliegen?
Wollen in der Lage sein, genau zu wissen, wann Ihre Packung etwa ist Spannung zu fallen?

Die Neu - & - Verbesserte Hobbyking drahtlose Batterie-Tracker überwacht Ihre LiPoly über den Ladestecker und sendet ein Signal an den Empfänger zurück. Sollte einer Ihrer Zellen fallen unter 3,6 V die LED für diese Zelle wird rot. Sobald die Zelle unter 3 V die LED fällt, blinkt und der Warnsummer gibt einen Piepton signalisiert Ihnen so schnell wie möglich zu landen.
Dieses Gerät ist auch eine gute Möglichkeit, die Batterien zu finden, die Spannung stark unter Last fallen.
Der Sender arbeitet auf 869.5Mhz FM-Band und kann 2S 6S Batterien überwachen.

Spec.
Transmitter Gewicht: 7 g
Receiver Gewicht: 35g (das ist der Teil, den Sie in Ihrer Tasche halten)
Signalabstand: Rund um 300-400mtr
Batterie: 7.4V / 2 Zelle (im Lieferumfang enthalten)
Verwendung;
Sicherstellen, dass der Hand Empfänger eingeschaltet ist und Sie die Anzahl von Zellen zuerst ausgewählt. Sobald dies geschehen ist, schließen Sie dann den Sender in der Ebene auf die Batterien Balance Stecker. Wenn Sie in dieser Reihenfolge tun es nicht tun, wird das Lesen nicht korrekt.
Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    HK-Traker8695
  • Brand:
    HobbyKing
  • Gewicht ( g)
    129.00
  • Länge
    0.00
  • Breite:
    0.00
  • Höhe:
    0.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
prejudice to the product I purchased and a great product that meets my visa application quality 'money. shame that you can not adjust the potentiometers so that' have a precision of the receiver when the battery discharge
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
A fantastic product! I have used it in both an RC boat and a touring car. The boat uses a large brushless motor that can use up to 80Amps and the monitor was fantastic at not only showing the current voltage of the cells but under acceleration it was also useful to monitor the overall health of the individual cells in the lipo pack, showing clearly that a couple of the cells where dropping voltage compared to the rest of the pack.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this peace of garbage with great expectations, well at least with the expetation that it would work for more than 10 seconds. It seemed to work out of the box when i initaly tested it, put it away for a couple of weeks when i went to install it the reciever was completly dead. I maid sure it had enugh voltage , charged it to capasity and no love, the antenna broke off from the base of the unit and DEAD! save your money
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Unfortunately, everyone is right. This is a terrible product. I ordered it with the hope that the reviewers just got a dud unit. Well, only 2 out of the 6 cell LEDs work. Surely the factory can have better quality control than this! HK, ditch this product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is really a terrible product. Not only were half the LED's burned out on the reciever when we got it, the transmitter seems to draw a lot of power from the battery.

I think you need to spend more for a decent solution.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Funktionier ganz gut etwas mehr reichweite wrde nicht schaden
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super geniale Hilfe beim Modellflug dieses kleine gadget ist echt der Hammer
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
On first times beeps occur after 2-3 minutes of flight (usual flight time for my plane is 10-11 minute). And now alarm and beeps starts immediately after fully charged battery connection. Fully unusable. Not recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I would appreciate a LiFe version ! I guess the potentiometers are trims for voltage measurement of cells 3 to 6, but it's just a guess, I didn't test it.

The channel is selected by jumpers on the transmitter and the receiver. For the 869.5 MHz I bought, the jumpers J1 and J2 are closed, J3 is open. 3 stars only because it starts beeping when one cell drops under 3.6V, so it beeps almost all the time. Louder beeps that occur under 3V are enough.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent product. Using a 2x3s>6s splitter you can monitor 2 x 3s batteries in either parrallel or series. I am personally using HK's TWIN PACK CHARGE LEAD to monitor 2 3s packs in parallel for the same price as a splitter - simply don't use the heavy guage red & black > deans connector for this application.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.