Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking X-Car 13,5 Schalten Sensored Brushless Motor 2600Kv

Hobbyking X-Car 13,5 Schalten Sensored Brushless Motor 2600Kv

Discontinued Product

Please continue searching for a similar product.
SKU:
S2030-6003
WANT FREE SHIPPING? Click here to find out more!

Die Hobbyking X-Car Sensored Brushless Motoren bieten hervorragende Leistung zu einem unglaublichen Preis. CNC eine Qualität eloxiert Mit Abschluss dieser Motoren so gut aussehen, wie sie gehen! Der einstellbare Timing ermöglicht eine Feinabstimmung der Leistung Ihres Motors, während der Sensor reibungslosen Start-ups und Beschleunigung gewährleistet. Die Hobbyking X-Car Brushless-Motoren machen ein großes Upgrade für 1/10 Short Course Trucks, Buggies oder Tourenwagen.

Specs:
Kann Größe: 540
Schaltet: 13.5
RPM / v: 2600kv
Sensored: Ja (Standard 6 - Pin - Geschirr)
Pole: 2
Max Spannung: 7.4 ~ 14.8V (2S / 4S)
Max Strom: 19A
Max Watt: 500W
Widerstand: 0.0361ohm
Nein Ladestrom: 0.6Amp
Schachtgröße: 3,175 mm
Gewicht: 167 g

  • Artikelbezeichnung S2030-6003
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 240.0000
  • Länge 144.00
  • Packaging Width 55.00
  • Höhe 55.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

after 2 years:

This motor is still running strong. I ran it a long time on 4s in a 1/10 2wd sct, and it worked very well, actually too powerfull on 4s. I even ran a short time on 6s (not recommended as the motor is only rated at 4s) the sct is now setup for track running on 2s at 1:9,0 gearing, and it works very well. It is not as powerfull as 4pole motors, but it is smooth, and suits rwd sct trucks well at ~30mph. For higher speeds you should go for the 10,5T. This motor is cheap, reliable and has good power. Honestly, i am impressed, thought it would break down by now. Definetly recommended for use in 1/10 light offroad vehicles (rwd) and onroad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

after 2 years:

This motor is still running strong. I ran it a long time on 4s in a 1/10 2wd sct, and it worked very well, actually too powerfull on 4s. I even ran a short time on 6s (not recommended as the motor is only rated at 4s) the sct is now setup for track running on 2s at 1:9,0 gearing, and it works very well. It is not as powerfull as 4pole motors, but it is smooth, and suits rwd sct trucks well at ~30mph. For higher speeds you should go for the 10,5T. This motor is cheap, reliable and has good power. Honestly, i am impressed, thought it would break down by now. Definetly recommended for use in 1/10 light offroad vehicles (rwd) and onroad.

Nice looking motor made with average quality materials and assembly.

Considering the power of the motor it depends a lot on weight of the vehicle, surface that you run on it, the tires and the way of the driving. I am preparing the table with comparison of characteristic from 13,5T to 6,5T. I will publish as soon as it will be finished.

This motor is like as it is prescripted. I even measured much higher current draw.

Sensor plate went off after few drives, so now I can use it only like sensor less motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice looking motor made with average quality materials and assembly.

Considering the power of the motor it depends a lot on weight of the vehicle, surface that you run on it, the tires and the way of the driving. I am preparing the table with comparison of characteristic from 13,5T to 6,5T. I will publish as soon as it will be finished.

This motor is like as it is prescripted. I even measured much higher current draw.

Sensor plate went off after few drives, so now I can use it only like sensor less motor.

Recieved this motor mising 2 screws leaving the entire sensor plate loose. After fixing it the motor worked just perfectly.

Used it in a 2wd 1/10 SC truck on 4s lipo. Loads of power and very smooth. Amp draw was below 50 and temperatures never exceeded 60 degrees celcius with modest to hard driving. Very good motor on 4s lipo

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Recieved this motor mising 2 screws leaving the entire sensor plate loose. After fixing it the motor worked just perfectly.

Used it in a 2wd 1/10 SC truck on 4s lipo. Loads of power and very smooth. Amp draw was below 50 and temperatures never exceeded 60 degrees celcius with modest to hard driving. Very good motor on 4s lipo

Very strong at low rpm, running cold and quiet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very strong at low rpm, running cold and quiet.

I installed this motor in my Axial Honcho and all i can say is it hauls ass :p I'm running this motor off of a mamba max pro and bought a novak sensor wire to replace the one that never came in the box. I have a 17t pinion on it and using a 3 cell lipo, I have a hard time controlling the truck with anything more then 1/4 throttle witch is way to fast for anything crawling related. So far after about an hour of abuse this motor has nuked a metal spur gear and broken an axle with barely any effort while staying cool to the touch, I will defiantly be buying another for my other project and recommending it to friends.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I installed this motor in my Axial Honcho and all i can say is it hauls ass :p I'm running this motor off of a mamba max pro and bought a novak sensor wire to replace the one that never came in the box. I have a 17t pinion on it and using a 3 cell lipo, I have a hard time controlling the truck with anything more then 1/4 throttle witch is way to fast for anything crawling related. So far after about an hour of abuse this motor has nuked a metal spur gear and broken an axle with barely any effort while staying cool to the touch, I will defiantly be buying another for my other project and recommending it to friends.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save