Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HobbyKing® ™ Wolke Surfer EPO FPV Glider w / Flaps 2000mm (P & P)

Generating Links

HobbyKing® ™ Wolke Surfer EPO FPV Glider w / Flaps 2000mm (P & P)

Preis:

Now save speichern 0,00 € 0,00 €

114,24 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9457000006-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Aufbauend auf den bereits etablierten Fähigkeit unserer speziell dafür gebauten Sky Eye als FPV Segelflugzeug, haben unsere Designer alle Register zog das Original des Flugeigenschaften zu verbessern und lieferte die Waren mit der Cloud Surfer. Das neue T-Leitwerk Konfiguration ermöglicht eine verbesserte Stabilität und Flugsteuerung Ansprechbarkeit, die beide Hauptanliegen bei jeder FPV Kamera-Plattform vor allem im Flugbereich langsame Geschwindigkeit, und der neue Look hat noch markanter durch seine glatten grauen Finish gemacht worden.

Dies ist ein großes Modell, das eine riesige 2 Meter Spannweite verfügt, aber das sagte, gibt es keine Notwendigkeit ist da, um die Cloud-Surfer auf Ihre Flugplatz zu kümmern. Es verfügt über eine zweiteilige Steck in Flügelmontagesystem ermöglicht es an Ihrem Bestimmungsort in fast jedem Kraftfahrzeug und einmal transportiert werden, ist einfach und schnell zu montieren.

Die magnetische Kabinenhaube ermöglicht den einfachen Zugriff auf die Batterie, Empfänger und Kamera ohne den Bereich Gefühl voll. Sechs schwere Mini-Servos sind bereits vorinstalliert, so ist die leistungsstarke Brushless-Aussenläufermotor und ESC.

Bigger Fliegen besser und das ist vor allem mit FPV Segelflugzeug-Plattformen wahr und Sie können darauf wetten, dass die Wolke Surfer sicherlich die Rechnung hier passt. Eine riesige Flügelfläche gekoppelt mit vorinstallierter Klappen sorgt für eine stabile und fast un-anhaltbar Flug das ist genau das, was man sich als FPV Pilot suchen.

Mit der Cloud Surfer "da oben" bekommen ist einfach, mit seinen leistungsstarken 35mm Brushless Outrunner und 8-Zoll-prop. Zusammen bilden sie die Cloud Surfer mit einem hervorragenden Steigrate liefern und sobald Sie Ihre gewünschte Höhe seiner einfach ein Fall von backing off Ihre Drossel erreichen und für einige erste Rate FPV Gleitflug sesshaft.

Robuste EPO-Schaum Konstruktion ist einfach zu montieren Aufgrund der geringen Anzahl von Teilen und die klare Front Kuppel gibt eine uneingeschränkte Sicht nach vorn für Ihre Aktion und / oder FPV Kamera.

Die Cloud Surfer ist alles, was Sie suchen in großem Umfang und Zweck gebaut FPV / Kamera-Plattform. Es ist leicht zu bauen und Set-up, einfach und vor allem ein fantastisches Preis-Leistungs-Verhältnis zu fliegen.

Eigenschaften:
• Robuste EPO Construction
• Plug-and-Fly-Format, fügen Sie einfach eine Batterie und Reciever!
• Große Größe Ideal für Stall Fliegen in einer Vielzahl von Wetterbedingungen
• Einzigartige Nase Mounted Transparente Kamera-Haube
• Einzigartige T-Schwanz-Konfiguration
• Vorinstallierte Landing Rad
• Vorinstallierte Flaps
• Große Magnet Canopy
• Plug In 2pc Flügel für den einfachen Transport
• Leistungsstarke 35mm Brushless Outrunner
• Große Nutzlastkapazität
• Große CF Flügel Rohr

Specs:
Spannweite: 2000mm
Länge: 1100 mm
Gewicht: 1400g
Flügelfläche: 46.3dm2
Flächenbelastung: 29,2 g / dm 2
Servo: 6 x Mini 17g
ESC: 30A w / BEC
Motor: 3536 Brushless Outrunner 900kv
Prop 8 "x 6"

Alle Hardware & Anleitungen inklusive

Benötigt:
Ihre eigene 6-Kanal-TX / RX
2200mAh 3s Lipo Akku (min)
Schaum Kleber oder Schaum sicher CA und Kicker

  • DIY Parts for the HK Cloud Surfer FPV
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Zsolt | Verifizierter Käufer

  • Overall
  • Quality
  • Value

The best you can get

Mar 15, 2018

Pros:
- easy to put together
- Tons of space to fit all your gear, batteries, etc
- Flies amazing, floats thanks to its flaps, if configured properly
Cons:
- foam is soft and flimsy - careful when putting it together. I simply laminated it in a single piece ;)

Henrique | Verifizierter Käufer

  • Overall
  • Quality
  • Value

NOT GOOD for beginners

Nov 23, 2017

I'm a beginner and this plane give me some headaches that I would not recommend if you're a beginner. Foam is very cheap and flimsy and breaks easily. If you're experienced and already have a lot of FPV stuff, I'd say go for it.

Jerry | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Nice Sailplane, Powerful motor, Long flight times with 3.3hr battery nice aileron/elevator cruising banking.. flaps work great.. EPO is EPO..

Sep 11, 2017

The plane flies great! With a 3.3amp hr battery this bird can fly for an 45 minutes or more!
It looks great in the air. When you build it, make sure you buy yourself a balance tool and locate the battery in it's proper spot because an airplane that is tail heavt only flies once.
A member at the R/C club I belong to balanced my CloudSurfer for me. If you are using the 3.3amp turnigy lipo sold here the battery should mount all the way up front. Also if you don't have any fpv equipment during the maiden flight.. like me you will need to add lead to the nose to balance it out. The assembly directions for configuring the r/c channels is wrong for anyone who flies USA mode 2. The elevator and alerons are reveresed. It's no biggie. I also used channel 7 for the flaps and mixed channel 6 so I can use a knob on my radio to tweek the flaps. It really flies well.. You can easily steer the bird with alierons only.. I have not had to use the rudder. The wings have stayed in place even during flights with hard banking. My last flight I did run into an issue. I banked hard into a thermal... cut the motor, banked and gave the elevator some down.. went into a dive as planned.. but I got too close to the top of the corn in a corn field, paniced.. accelarated too hard whild banking and climbing away.. I ended up plowing into the corn field. The only damage was the top of the fusealage wing assembly area. This are is the Cloudsurfers weak spot. The crash was not hard enough to damage the fuesalge, but the wings on impact ripped out of the fuesalage. The EPO glue I purchased from Hobbyking appears to be great... I'll fly it again next Saturday.
It is a fun plane to fly.

gouret | Verifizierter Käufer

  • Overall
  • Quality
  • Value

cloudsurfer

Mar 17, 2017

recu le mien sans problème, assemblage trés facile ,j ai installé une batterie graphene 3S 4000 MAH pour le CG, qualité de vol très simple et calme, je dirais meme qu'il est gratteur comme un planeur ,premier vol avec cette batterie en temps calme de 40 minutes, je l'utilise en fpv avec une carte APM , le seul problème rencontré est l'hélice qui est mal équilibrée ,,bon vol a tous

Disapointed | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Purchased 07-03-2017 - reviec

Mar 07, 2017

What can I say, I purchased this plane last week and the quality is so so bad and worst of all there are NO SPARES AVAILABLE FOR THIS MODEL.
1. The wings dont fit together flushly.
2. The servo holes are too big on the main wing making it a very sloppy movement.
3. The servo in the elevator holes are too small for the control rod.
The screws to attached the clevises are about 10 cm too long and protrude from the top of all the wings, they are also very sharp.
4. The rudder servo nearly rips the tail off where the throw is way to much and bends the rod to 35 degrees.
5. The foam is very bad quality and as the wings are only held together with friction, the foam on the wings is very easily dented.
6. The control surfaces are warped and do not line up properly with the wing.
7. The elevator section when screwed on is slightly twisted and does not sit straight with the fuselage.
8. This model is grey and the paint peels off very easily.
9. the horns and clevises are really small and flimsy and will very easily break with any kind of pressure.
10, its takes more that 1 x 2200 as reco by HK to balance this plane, not sure which clueless person wrote that!

BE WARNED.....


Sergio | Verifizierter Käufer

  • Overall
  • Quality
  • Value

query

Nov 14, 2016

HK sell the replacement for the dome?

Sergio | Verifizierter Käufer

  • Overall
  • Quality
  • Value

query

Nov 14, 2016

HK sell the replacement for the dome?

phamilton | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 15, 2016

Pros:
- VERY easy to put together
- Tons of space to fit all your gear
- Flies amazing, floats even in the crapiest air

Cons:
- foam is soft and flimsy - careful when putting it together
- CAREFUL with the CG... first flight was slightly back and landing was a nightmare

If the foam were of better quality, this plane would get my 5 crowns!

Gregory | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2016

Great plane just make sure you have the CG in the correct spot I needed to get a 5000mA battery to pull the CG forward. Once you get the wings on they are hard to get back off, not made to be removed after each flight for transport so you you might want to have a truck or large SUV to transport this plane to a field. Very stable in the air when you get the CG correct.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 05, 2016

de petits ajustements au niveau du jeu dans les tringles. mettre un CG ? 75mm mais piqueur. H?lice horrible (direct poubelle pour la mienne) mais sinon un super planeur, ?a vole tout seul

  1. 1
  2. 2
Kundendateien
2X3S2200 lipo Download [370]
1 Download [412]
JN's CloudSurfer in flight Download [263]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör