Die HobbyKing® ™ J3 Cub ist eine originalgetreue Darstellung dieses berühmten zivilen Luftfahrt-Symbol, das sowohl für erfahrene Piloten und Anfänger Suche nach einem schönen Modell im Maßstab zu lernen, ansprechen wird. Ausgezeichnete Flugleistung sowie gute Flugzeiten garantiert. Eine große schauende Modell sowohl auf dem Boden und in der Luft.
Dies ist ein einfach zu montieren, Plug-and-Play-Modell, die Sie haben, und in kürzester Zeit zu fliegen. Alles, was Sie das Modell zu vervollständigen benötigen ist ein 800 ~ 1200mAh 3s Lipo Akku und Ihren eigenen Sender und Empfänger (Tx / Rx). All die allgemeine Hardware (Schubstangen, Hörner, Schrauben usw.) enthalten sind Ihr Modell den Weg zu bringen. Die HobbyKing® ™ J3 Cub verfügt Skala Motor Detail, pilot, eine Landung Bungee-Stil Gang und Maßstab Cub Räder.
ESC: A-ZTW20A BEC ESC
Servo: 4 x 9g PZ-15178
Akku: 11.1V 3S 800 ~ 1200mAh LiPoly
Batteriefach Größe: 70x40x32mm
Ihr TX & RX
11.1V 3S 800 ~ 1200mAh LiPoly Batterie
Kapazität ( mAh)
Gewicht ( g)
Schreiben Sie Ihr eigenes ReviewMy maiden review is below. Thought id follow up. Last sept I finally bent the motor shaft straight enough since they never came in stock. Went to fly on a windy day and couldnt get her airborne. Seemed tailheavy so after 2 failed takeoffs I took her home before I broke anything. I added an ounce to the nose even tho it seemed balanced on the bench. Took her up a couple weeks ago, late april. Perfect day. 0 wind. At full throttle it was okay. The moment I brought it under half throttle, at least 150ft up, she had no glide and went into the same death spiral I saw the first flight. I could put her back together but Ive lost my enthusiasm for this bird. She was going to be my night flyer. My HK P-51 I bought at same time has at least 100 flights now and has been flawless. I dont see anyone else with these problems on the Cub so guess I just got a dud. =(06/01/2013. Bought this plane in summer 2012.
It's beautiful, good material but it can't fly because it's very hard to balance it right.
The adviced 1000mAh LiPO isn't good to balance the plane! It's too tail heavy and adding weight in the nose make it very unstable because the weight need to be placed in all the plane not only in the nose.
In the third and last attempt i putted almost 100g of weight in the nose but it still look a bit tail heavy. After less then a minute he started a rotation on itself and crashed badly (i think because of the too much weight all in the nose trying balancing it).
Crappy plane! wasted 99 $ for the plane and 50 for the shipment!
I think the decathlon could be a better deal if you make the changes that you can find on youtube to balance it right! This changes cannot be made in this piper cub because it's not all foam but there is also an hard plastic (where the pilot sits in) that you can't easily cut and even if you do this spend more on this very scale plane is a non sense if you have to change everything!
got my cub today. was very inpressed with the level of detail on the plane. warning watch out for the left wheel it unscrews it self when the when the wheel rolls. prop construction is strange it took me around 10min to actually figure it out all up would highly recomend thid plane to any one 4 STARS!!!!!!!Fantastic old aircraf Pipper Cub!
Pre build and plug and fly in minutes.
I flew 20 minues with 3cell 1350.
Very nice product to fly with low price.Broke the landinggear on a windy landing (yes im a noob). anyone know were i could find a new gear or a nice replace?
nice first plane i think.I ordered this plane from overseas. It took over a month to arrive. It says in item description it takes a couple of extra days so I didnt expect it sooner. Packaging was nice and no damage upon arrival. Locktighted the left wheel as suggested. Bound to an orange 6ch rx no problem. Motor has some power to it on a Zippy 3s 1000 25c. Then i found one of the aileron servos to be glitchy. I bought some decent servos on ebay for the ailerons as I hear the CS at HK will want me to ship the servo back overseas so I didnt even bother. Took her out for a maiden flight. Right before I went up I commented on the super low amount of throw on the elevator. Figured it would be alright. It wasnt. She just wanted to climb. Full down elevator and half throttle would barely get me to level flight. Full throttle put it in loops no matter where the elevator stick was. Ended up crashing down in a death spiral from 100 ft up. Surprisingly the plane isnt too bad off. Small crack in wing and fuselage which were easily fixed with glue and can barely be noticed. Bent motor shaft which is a bummer since there are no replacements in stock, so Im grounded. The culprit? Elevator servo has the horn cut down to a nub and the connecting rod is in the closest (and only remaining) hole. I replaced the servo horn and moved the connecting rod way out. Looks like I have proper throw now. Ill upload pix of the way tbonito e ele voa sim. mas, a haste de pouso [de plstico] quebra com facilidade; h um problema nas rodas que no giram perfeitamente travando o aeromodelo na pista; e o pior que no h peas de reposio em caso de quebra.Fantastic plane! I am how to fly with it. very smooth and precise. little difficult to land in windy days because is a very light plane.flying this plane is much easier than the trainer from the simulator, highly recommended for the very beginner.looks great, durable and flyable.No doubt if you are a beginner this plane is for youDO NOT ORDER EMS SHIPPING!!! hobby king screws you by saying it takes 3-4 days, i ordered mine and its been 7 days since it was shipped and still nothing.. Hobby King will not even give me any sort of refund on the shipping!! Terrible!!!