Neue Produkte Neuigkeiten Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HobbyKing® ™ Piaget EVP-CF 3D

HobbyKing® ™ Piaget EVP-CF 3D

Discontinued Product

Please continue searching for a similar product.
SKU:
TR-Piaget
WANT FREE SHIPPING? Click here to find out more!
HobbyKing® ™ Piaget EVP-CF Modell

Das ARF enthält einen Motor und Stütze w / Propsaver. Gerade sind Ihre eigenen Empfänger, Servos, ESC und Batterie Flug bereit in kürzester Zeit zu sein!
Es hat nie eine bessere Möglichkeit zu üben niedrige 3D-Flug gewesen als bei Hobbyking die neue Reihe von EPP Flugzeuge.

Spec.
Rumpflänge: 900mm
Spannweite: 820 mm
ARF Gewicht: 210 - 240 g
Inbegriffen;
Motor: 1500kV Brushless Outrunner
Airscrew: 9050 Slowflyer

Erforderlich;
Batterie:
2S ~ 3S 800mAh 15C
Servo: 3 x 9g
ESC: 18A
Ihre eigenen Sender und Empfänger
  • Artikelbezeichnung TR-Piaget
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 1595.0000
  • Länge 880.00
  • Packaging Width 45.00
  • Höhe 280.00
  • HobbyKing® ™ Piaget EPP-CF 3D
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Excellent value and a great flyer......3s 460mah with a GWS EP 9x5......perfect for out door 3D!!!
cheers Rob

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent value and a great flyer......3s 460mah with a GWS EP 9x5......perfect for out door 3D!!!
cheers Rob

This is a very decent flyer with minimal need for channel mixing. Motor is plenty powerful, using rhino 3s 610 mah. Fly 1/3to1/2 throttle, seldom more. Motor and esc barely get warm. It flies very light, and precision is surprising, even with mild wind. With a dive or higher throttle, ailerons will flutter, so will have to stiffen those up. I have been pleasantly surprised by this one. Not good for beginners, but with any experience, it is not hard to fly. Very, very good value at this price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very decent flyer with minimal need for channel mixing. Motor is plenty powerful, using rhino 3s 610 mah. Fly 1/3to1/2 throttle, seldom more. Motor and esc barely get warm. It flies very light, and precision is surprising, even with mild wind. With a dive or higher throttle, ailerons will flutter, so will have to stiffen those up. I have been pleasantly surprised by this one. Not good for beginners, but with any experience, it is not hard to fly. Very, very good value at this price.

Great plane. Had 3 of them. Some mods. Extend all servo arms by 30mm . Cut out foam in vertical stabiliser (circle part) so elevator gets movement all the way to the struts and crank up movement control on servo to hold elevator against the wind as wind from prop will blow down surfaces. Do the same for rudder by cutting corners off elevator to give more rudder throw. Max out movement on aileron and you now have a 'weapon' to really enjoy!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great plane. Had 3 of them. Some mods. Extend all servo arms by 30mm . Cut out foam in vertical stabiliser (circle part) so elevator gets movement all the way to the struts and crank up movement control on servo to hold elevator against the wind as wind from prop will blow down surfaces. Do the same for rudder by cutting corners off elevator to give more rudder throw. Max out movement on aileron and you now have a 'weapon' to really enjoy!!!

i had trouble with this one. build was fairly simple but cutting all the carbon fiber and glueing it together was a pain in the butt. hot glue seemed to work the best. it flew great besides one problem which was the ailerons. i dont know if it was just my flying or because i was flying outside but the ailerons were crap. did not respond at all like a 3d plane should. the elevator and rudder had plenty authority but the ailerons need work with my experience with this. and if you do buy it fly with a 3 cell. much better performance from the motor. the plane is great for the price though.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i had trouble with this one. build was fairly simple but cutting all the carbon fiber and glueing it together was a pain in the butt. hot glue seemed to work the best. it flew great besides one problem which was the ailerons. i dont know if it was just my flying or because i was flying outside but the ailerons were crap. did not respond at all like a 3d plane should. the elevator and rudder had plenty authority but the ailerons need work with my experience with this. and if you do buy it fly with a 3 cell. much better performance from the motor. the plane is great for the price though.

I suppose you get what you pay for? This is really only good for indoors. You can hover outdoors, but trying to fly at any speed it shutters. The wind beats it up. The control surfaces are flimsy so it's like flying a towel. Very unstable. But like I said, you get what you pay for. It's good for practicing hovering and inverted flight, but don't expect a real flyer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I suppose you get what you pay for? This is really only good for indoors. You can hover outdoors, but trying to fly at any speed it shutters. The wind beats it up. The control surfaces are flimsy so it's like flying a towel. Very unstable. But like I said, you get what you pay for. It's good for practicing hovering and inverted flight, but don't expect a real flyer.

I am a bigginer 3d pilot and was trying to find a nice cheap 3d plane to start out with....it wasnt exactly the easiest plane to put together..there were many times i felt like i needed alot more than 10 fingers to get this plane built, and the instructions were awful....however, it didnt take as long as i thought it was going to...and when i did finally get it up and flying i felt like the ailerons werent as responsive as i thought they should be...the plane also liked to dip to the side that the battery is mounted on no matter how much counter trim you put in...but for someone who is just getting into the 3d chapter its not a bad plane...i had this thing hovering and doing knife edges as soon as i got it in the air...i have flown it 4 times now and even brought it in close enough to catch it....i highly doubt i will buy another one though....i just wasnt as impressed with the straight line flying as i thought i should be

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am a bigginer 3d pilot and was trying to find a nice cheap 3d plane to start out with....it wasnt exactly the easiest plane to put together..there were many times i felt like i needed alot more than 10 fingers to get this plane built, and the instructions were awful....however, it didnt take as long as i thought it was going to...and when i did finally get it up and flying i felt like the ailerons werent as responsive as i thought they should be...the plane also liked to dip to the side that the battery is mounted on no matter how much counter trim you put in...but for someone who is just getting into the 3d chapter its not a bad plane...i had this thing hovering and doing knife edges as soon as i got it in the air...i have flown it 4 times now and even brought it in close enough to catch it....i highly doubt i will buy another one though....i just wasnt as impressed with the straight line flying as i thought i should be

Leicht aufzubauen. Leicht zu fliegen. ABER. der vom EU warehouse mitgelieferte Motor enspricht nicht dem Bild im Shop bzw der Anleitung. Vom Support fehlt bis heute die Antwort zu den technischen Daten des mitgelieferten Motors. Bild vom Motor mit mutmasslichen Angaben unter "files" der Motor knnte gerne etwas mehr Bumms haben

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Leicht aufzubauen. Leicht zu fliegen. ABER. der vom EU warehouse mitgelieferte Motor enspricht nicht dem Bild im Shop bzw der Anleitung. Vom Support fehlt bis heute die Antwort zu den technischen Daten des mitgelieferten Motors. Bild vom Motor mit mutmasslichen Angaben unter "files" der Motor knnte gerne etwas mehr Bumms haben

Great airplane for the money! Assembly was interesting. The foam is very flimsy, think wet noodle! But built on a flat table and after adding the CF rod, it's surprisingly rigid. Included motor with 8x4 prop and 500 2S Lipo gave all the power I needed. Flies very well. I find the aileron adequate, some seem to complain about them. Fun to fly in my yard and have flown it in the airplane hangar where I work. Might buy a few more at this price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great airplane for the money! Assembly was interesting. The foam is very flimsy, think wet noodle! But built on a flat table and after adding the CF rod, it's surprisingly rigid. Included motor with 8x4 prop and 500 2S Lipo gave all the power I needed. Flies very well. I find the aileron adequate, some seem to complain about them. Fun to fly in my yard and have flown it in the airplane hangar where I work. Might buy a few more at this price!

I could fly it straight away after three flights and some trim I am rolling, looping, harriering, knife edging, sort of hovering not mastered it yet (I think there is a trick to that). 750mh 3 cell and 8x3.8 prop in strong wind works well. I used hing tape worked well with 3m 77 spray and 3m 77 spray to glue large foam surfaces together and CA with kicker for the rest. give all control surfaces maximum throw. kit made of 5mm EPP. parts fit excellent. Nice building-instruction provided.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I could fly it straight away after three flights and some trim I am rolling, looping, harriering, knife edging, sort of hovering not mastered it yet (I think there is a trick to that). 750mh 3 cell and 8x3.8 prop in strong wind works well. I used hing tape worked well with 3m 77 spray and 3m 77 spray to glue large foam surfaces together and CA with kicker for the rest. give all control surfaces maximum throw. kit made of 5mm EPP. parts fit excellent. Nice building-instruction provided.

Dit w-end de eerste vluchten gemaakt met mijn Piaget. PRACHTIG WOW !!! Een echte aanrader. Ik heb 3 servo's van 9 gram erin gezet .regelaar van hobby-king . 18a20 Amp en 8040 prop. Ik vlieg op 2cellen 450mah. Daar vliegt hij heel rustig mee. En heb voldoende power om te hoveren. Prijs kwaliteit een echte aanrader. Zeer snelle levering naar belgie van NL Warehouse;

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Dit w-end de eerste vluchten gemaakt met mijn Piaget. PRACHTIG WOW !!! Een echte aanrader. Ik heb 3 servo's van 9 gram erin gezet .regelaar van hobby-king . 18a20 Amp en 8040 prop. Ik vlieg op 2cellen 450mah. Daar vliegt hij heel rustig mee. En heb voldoende power om te hoveren. Prijs kwaliteit een echte aanrader. Zeer snelle levering naar belgie van NL Warehouse;

Customer files
Better Piaget manual Download [4105]
Piaget Manual Download [371]
different motor EU warehouse Download [262]
Manual_EN Download [3715]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking