Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HobbyKing® ™ Radjet Ultra-Pusher / EDF Flugzeug 790mm (ARF)

Generating Links

HobbyKing® ™ Radjet Ultra-Pusher / EDF Flugzeug 790mm (ARF)

Preis:

Now save speichern 0,00 € 0,00 €

57,65 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9374000017-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die Radjet ultra bietet eine einfache Montage, mehrere Stromsystemoptionen und böse gut aussieht. Konstruiert aus haltbarem EPO-Schaum und mit Kohlefaser verstärkt, ist dies eine harte Flugzeug. Der Flügel verfügt über einen großen Kohlefaser Flügelholm keine flex während der Hochgeschwindigkeitsflug zu gewährleisten.

Dieses Modell ist einzigartig, weil es dem Benutzer drei verschiedene Leistungssystemoptionen bietet. Es kann von einem traditionellen Schieber Setup, Doppel 55mm EDF oder einzelne 64mm EDF betrieben werden. Es ist deine Entscheidung. Die Zelle ist sehr steif so dass sie extreme Geschwindigkeiten von 100 + MPH zu handhaben, so haben Sie keine Angst um einige ernsthafte Macht hinzuzufügen!

Achten Sie darauf, über den Flug Video zu überprüfen. Wir nutzten die Quanum GPS-Logger nur um zu zeigen, wie schnell dieses Modell fliegen kann!

Eigenschaften:
• "Almost Ready to Fly" Format, fügen Sie Ihre eigene Elektronik, Funksystem und Batterien
• Drei Leistungssystem-Optionen können als Schieber-Setup, Doppel 55mm oder 64mm Einzel EDF konfiguriert werden
• Robuste EPO-Schaum Bau
• Helle Farben für eine einfache Orientierung in der Luft
• Einfache Montage

Specs:
Länge: 740mm
Spannweite: 793mm
Flügelfläche: 14.2dm2
Fluggewicht: 700 ~ 800g

Erforderlich:
3 ~ 4-Kanal Sender und Empfänger (mit Delta / elevon Mischen)
9 ~ 13g Servo x 2 (Metallgetriebe empfohlen)
28mm Brushless Outrunner Motor (Pusher-Setup)
60 ~ 80A ESC (Pusher-Setup)
64mm EDF Energiesystem (single EDF-Setup)
55mm EDF Energiesystem x 2 (zwei EDF-Setup)
3 ~ 4S 1800 ~ 2200mAh LiPoly Batterie

  • HobbyKing® ™ Radjet Ultra Pusher/EDF Airplane 790mm
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Robsoutflying | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Apr 22, 2015

Serious nose up problem as others have reported. CG in book is way off. I wrote a detailed report of my findings in the discussion part. Great plane quality. Very sturdy and solid. Definitely not as fast as my 121 mph, 3s Funjet due to it not being very streamline because of the three configuration setup at the back that creates a lot of drag. Since I realized it wasn't going to beat my Funjet for speed I decided to go EDF setup and because everybody else was doing pusher setup. My setup: Cyclone Power CS450-4500kv 2868 motor in a RcLander alloy, 6 blade fan, Turnigy 2200mah 4s, 60amp Turnigy esc, 54 peak amps @ 16.5v producing 762 watts. This setup was clocked at 85mph. Very disappointed not to break the 100mph barrier. Plus it ballooned my new battery up. Just received my new Turnigy 2.25mah nanotech 65-130c battery. Hopefully I will be able to report back with faster speeds.

cptn blinky | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 06, 2014

She is a nice looking bird. Bigger and heavier than the RJ800..Very simple to set up. I used the same setup as I used in the RJ800..
I took caution on the CoG and set it 55mm. 1st flight the launch is much smoother than the screaming RJ800 The throw are at 65pcnt with 48pcnt expo. Found her still tail heavy. but flyable. Re-set the CoG to 46mm and now she is perfect. low speed flight is VERY stable. Painted the under side fluro red as you cant see top or bottom.
Speed run was disappointing. I thought she would a bit slower than the RJ800 but not that slow.

4cell 1.8A 90C, 60A speedie, Aerodrive 2836 3000k, APC 4.5x4.5, draw 56 amps no wind very humid max speed 138klms.

same set up but with a APC 4.75x4.74 draw 76A wind now 10kts max speed over a 5.5klm run was 170klms. This was only in short burst as the speedie gets very hot. Flight time was about 6 mins at 1/3 2/3 throttle...
She is a very well behaved at low and mid power.
This bird is much slower than the RJ800 which I clocked at 230 klms with this set up..
Have some more motors to try.

planeguy | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jan 04, 2014

Installed a 64 mm edf and a HK 50amp esc. This thing is a screamer ! Flies really nice. Got 12 flights on it now at 6 minutes each. Very fast very stable even at slow speed for landing, love it ! Put fibreglass or duct tape on belly for asphalt landings.

Vivek RAthour | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Dec 30, 2013

purchased this kit and came well bpxed and superbly packed....

easy assembly , got the whole assembly done with electronics within an hour...using 5min epoxy....:)

will do a review on flight after a maiden

currently using :
2900kv motor
70 amps esc
6/4 prop
2200ma 4s cell

karlos1224 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Nov 19, 2013

This plane arrived very well packed. I went with a 4s set up 3000 kv NTM and 2200 nanotecks. Put it together and bench tested today. I got 800 watts,55 amps running a 5x5 prop. To windy to maiden today so will try in the morning and see how she flys. 5 crowns all round so far.

jhova1717 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Oct 25, 2013

awesome plane you can do a prop or twin edf or a single edf capable of 3s or 4s and very fast speed i got one as soon as they came out cant wait to fly it

Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör