Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm (PNF)

Generating Links

HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm (PNF)

Preis:

Now save speichern 0,00 € 0,00 €

125,87 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
PT17-PNP
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Prototyp Stearman PT-13 Kaydet zwei Sitz Doppeldecker flog zum ersten Mal aus Wichita, Kansas im Oktober 1934. Ausgestattet mit Lycoming R-680 Sternmotoren, die ersten Trainer, bezeichnet PT-13s, wurden zusammen in Mitte 1936 an die US Air Corps geliefert mit mehr Flugzeuge in den Jahren 1937 und 1938 für den Trainer 1940 Nachfrage stieg schnell und Lycoming Fähigkeit überflügelt Motoren zu versorgen. Dies führte zu der Continental engined Version, die PT-17.

Die Bedeutung der Stearman PT-13 / PT-17 an den US-Kriegsanstrengungen kann nicht genug betont werden. Etwa 50% aller US-Militärpiloten, die im Zweiten Weltkrieg gekämpft erhielten ihre anfänglichen Flugtraining in dieser robusten Flugzeuge. Weitere 10.000 RAF und Fleet Air Arm Piloten verwendet, um die Stearman Trainer für die Grundausbildung, bei British Flying Training Schulen in den Vereinigten Staaten zwischen 1941 und 1944.

Jetzt ist Ihre Chance, dieses ikonische militärischen Trainingsflugzeuge zu Ihrer Flotte hinzuzufügen. Diese Plug-and-Fly-Version des PT-17 ist aus ultra haltbar EPO-Schaum, gebaut und schön in einem genau Ära Schema gemalt. Beide Flügel sind verstärkt mit zwei Kohlenstoff-Holme eine starre Struktur zu gewährleisten und zu minimieren flex.

Features wie die wunderschön detaillierte Maßstab Lackierung, Kunststoff-Formmotorzylinderköpfe, die Auspuffrohre und Fahrwerksbeine bringen dieses Modell wirklich zum Leben. Es ist sehr schwer, dieses Modell zu sagen Schaum ist, wenn es in der Luft ist!

Die Montage ist ein Kinderspiel dank der ausführlichen Anleitung und eindeutig beschriftet Teile für die Flügelstruktur. Als Plug-and-fliegen, sind die Servos, Motor & ESC alle vorinstalliert, weniger Zeit auf der Bank bedeutet, und mehr Zeit in der Luft!

Eigenschaften:
• Dauerhafte EPO-Schaum Konstruktion
• Plug-and-Fly-Version müssen Sie nur Ihre eigenen Funksystem und Batterien hinzufügen
• Schöne Skala Farbgebung
• Einfache Montage
• Dual Kohlenstoff Holme in jedem Flügel

Specs:
Spannweite: 1200mm
Länge: 940 mm
Höhe: 390 mm
Fluggewicht: 1650g
Propeller: 12x6 ( im Lieferumfang enthalten)
Motor: 3648 850KV ( im Lieferumfang enthalten)
ESC: 40A ( im Lieferumfang enthalten)
Servo: 4 x 9g ( im Lieferumfang enthalten)

Benötigt:
4-Kanal-Sender und Empfänger
4S 2200 ~ 3000mAh LiPoly Batterie

  • Spannweite (mm) 1200.00
  • HobbyKing® ™ Stearman PT-17 Biplane EPO 1200mm
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Wolfgang | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Sehr schönes und einfach zu bauendes Modell - aber schlechte Anleitung

Mar 10, 2018

Sehr schönes, detailreiches Modell, habe es diesen Winter gebaut und werde es demnächst einfliegen. Die beigefügte 3-blättrige Anleitung ist gelinge gesagt ein Witz. Jeder hätte das Modell auch ohne diese Anleitung problemlos zusammenbauen können. Und das Wichtigste fehlt: die Angabe des Schwerpunktes. Hier hat (ebenfalls ein deutschsprachiger) User namens "Franz" angegeben, dass der Schwerpunkt 7 cm hinter der oberen Nasenleiste liegt. Danke Franz !

PEDRO | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Superb.

Oct 29, 2017

Excelent quality and scale like the Navy Cub.

Peter | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Help finding CG

Oct 27, 2017

Does any one know the location of the CG? The brief instructions don't mention it!
I am ready to fly apart from this!!!
Thanks

Carl | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Crashed 1st Flight!

Sep 20, 2017

Unfortunately I didn't read the reviews before I flew it; and it crashed and broke the fuselage in half along with a couple Cabane struts on the first flight; the CG was too far back (nothing in the instructions about CG) and it snapped on the approach to land when it got slow. However, I was able to fix it so it looked almost new and it got to fly again; I didn't see any spare parts listed anywhere so I had to improvise on the broken Cabane struts. It flew much better the 2nd time; I had added 5.5 oz of lead in the firewall to get the CG froward where it should be (not much room in there for lead). The instructions are VERY brief and if you've little modeling experience, this is probably not the airplane for you to start with; however, it only took me a day to assemble it for flight.This is pretty much a fun airplane, not extremely aerobatic, has a relatively slow roll rate, will do loops, eights etc. but don't expect it to be a Pitts. It fly's at 1/3 to 1/2 throttle OK Good value if your just looking for something to have a little fun with.

Noel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Flies very realistically but needs some alterations.

Jun 18, 2017

Flew the model for the first time this morning. I had to put some weight under the cowling and had some help from an experienced flier. We used the buddy lead between two Turnigy transmitters. It flew really well after trimming by my expert flier. Now I will try to make it more realistic by painting the exhaust ports and air intake in silver. Highly recommended.

Noel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Excellent product

Jun 16, 2017

Very beautiful scale model of the Stearman PT-17. Very accurate as well, not as mentioned in other reviews: the PT-17 had the 7 cylinder Continental radial engine which was beautifully copied in this model, NOT a 9 cylinder engine as mentioned in another review. Will however add the wing rigging and will paint the connecting rod covers in silver to make it more realistic. Will add a review after finishing the model and hopefully fly it.

nick | Verifizierter Käufer

  • Overall
  • Quality
  • Value

PT17

May 15, 2017

Mine arrived safely and all went together well. I had to put a chunk of lead in the nose cone.
I used foam 2 foam glue for the tail plane as it came with no glue.
I used epoxy to glue in the wing roots.
This bird has now become a firm favourite and lands very well.It also spins like a top.
Well done on another great model Hobby King.
Regards, Nick.

nick | Verifizierter Käufer

  • Overall
  • Quality
  • Value

PT17

May 15, 2017

Mine arrived safely and all went together well. I had to put a chunk of lead in the nose cone.
I used foam 2 foam glue for the tail plane as it came with no glue.
I used epoxy to glue in the wing roots.
This bird has now become a firm favourite and lands very well.It also spins like a top.
Well done on another great model Hobby King.
Regards, Nick.

nick | Verifizierter Käufer

  • Overall
  • Quality
  • Value

PT 17 Stearman

May 14, 2017

My Stearman arrived two days ago and was in perfect condition on arrival.
Maidened it yesterday and am happy to say this plane is becoming a favourite.
I had to add a bit of lead to the inside of the engine cowling and I am running a 3700 four cell.
It flies beautifully and spins like a top, What is NOT to like about this well made darling.
This evening I took an air brush to it and added a little weathering to it to remove some of the squeaky cleanness away and to make it look a bit like a hard worked trainer.
Fantastic value for money.
Thanks Hobby King.

Lennard | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Nice model- Just make it better

Jan 22, 2017

Money for value, This is a Great model. For the size of this, There is nothing else on the market at this price. Do not use the supplied glue, Use 30 min. epoxy, and remove the paint where you need to glue, I use acetone, works great. Pre-fit and sand, carve and do whatever to make sure all parts fit proper BEFORE gluing. Yes, you may need better screws for the horns, and Yes, You may need touch up paint, But really, Make this into a great flying model, Use common sense, This is a model, It is not perfect, None of them are, You may need to drill, cut, sand, use different screws, Whatever, The electronics in this are ok, just ok, they work, But I put better esc's and servos in all my aircraft. Just because I don't know what brand the factory uses, But again, This plane IS a Great plane for the price. I would buy another one, Just because of the price, AND it does look really good in the air. This is a old model, But I do buy a lot of old models, Because everybody works the bugs out. But do the RC groups search, And you will see the info. Mine is very detailed as all my aircraft are. I loved building this to make it look good, Hope you will too. As far as instructions go, If you really need Instructions to build this,, then this plane is not for you. That is why i will not comment on other reviews. And spare parts are available, just do a search,

  1. 1
  2. 2
  3. 3
  4. 4
Kundendateien
Manuel for ESC Download [1468]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Related Tags

Zubehör