Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HobbyKing® ™ Sukhoi SU-29 1300mm Balsa 3D (ARF)

HobbyKing® ™ Sukhoi SU-29 1300mm Balsa 3D (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
SU29-30
WANT FREE SHIPPING? Click here to find out more!

Letzte Chance Preis !!! Dieses Modell ist nicht mehr in der Produktion. Es gibt nur noch wenige Exemplare auf Lager und wir räumen sie aus unter Selbstkostenpreis !! (nicht den Chef sagen!) Wenn sie weg sind sie weg sind! Sie werden nie wieder einen Deal wie diese finden.

Die HobbyKing® ™ SU-29 ist ein hervorragend Preis und schöne, große 3D / Kunstflug-Modell, das genau das Richtige für einige Low-Cost 3D-Spaß.

Die leichte Zelle ist überraschend gut gemacht für den Preis und die helle Abdeckung ist perfekt für die Ausrichtung. Die Qualität der Hardware ist auch eine Überraschung für den Preis und beinhaltet CF Hörner & Flügelrohr, Klavierdraht Steuerstäbe und ein umfassendes Paket von Schrauben usw. Wie Sie von einem Modell dieser Größe erwarten würde, es ist auch praktisch mit Stecker in den Flügeln und einem großen Baldachin von starken Magneten befestigt.

Wenn Sie ein Kunstflugmodell suchen, der sowohl billig zu kaufen und zu bauen, diese große schau Sukhoi ist nur der Job!

Eigenschaften:
Leichtbau
Ausgezeichnete Hardware-Paket
Glasfaser Cowl
Robuste Nylon Radschuhe
Große Bedienoberflächen
Farbschema Ausgezeichnet für Orientierung
Niedrige Baukosten
Umfangreiche CD-Handbuch inklusive
Große Größe Modell für fast jeden Streifen

Specs:
Spannweite: 1300mm
Länge: 1300 mm
Flügelfläche: 37dm2
Fluggewicht: 1250g (Inc Motor, Regler, Servos , aber nicht inc Batterie)

Benötigt:
Ihre eigenen 4 ~ 6-Kanal-TX / RX
35-48 Brushless Outrunner Motor
40A ~ 60A ESC w / BEC
4 x Digital High Torque 9g ~ 12g Servo
2200mAh ~ 2650mAh 3s ~ 4s Lipo Akku

  • Artikelbezeichnung SU29-30
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 3585.0000
  • Länge 1010.00
  • Packaging Width 200.00
  • Höhe 505.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

disappionted with this product bad build quality rear tailplane slots did not aligne, tailfin was not upright with fus no outer wing tube through fus a weak point, accessary pack was rubbish. possible weak mounting on uc needs a heavy motor to get correct cg and at least 3000 ma lipo, hope it fliers ok needs better qc if you have a choice by the slick. david james

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

disappionted with this product bad build quality rear tailplane slots did not aligne, tailfin was not upright with fus no outer wing tube through fus a weak point, accessary pack was rubbish. possible weak mounting on uc needs a heavy motor to get correct cg and at least 3000 ma lipo, hope it fliers ok needs better qc if you have a choice by the slick. david james

Final configuration is to power the SK3 with a Zippy Compact 5S. Yeehaw!!! Straight up until out of sight. Now to start experimenting with greater control throws.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Final configuration is to power the SK3 with a Zippy Compact 5S. Yeehaw!!! Straight up until out of sight. Now to start experimenting with greater control throws.

Review update: I've re-motored it with the Turnigy Aerodrive SK3 - 4240-740kv spinning a 13x7 prop. 4S 2650 Nanotech and Turnigy Plush 60amp ESC. Have been able to remove all the lead ballast from the cowl and still move the battery further aft while maintaining good CG range. It will now prop hang and go vertical until I decide to stop. As it should, this plane stays in the attitude where you last pointed it and does not self correct. For example, ease off on top of a loop and it just flies away inverted until you do something about it. Go into a shallow dive and it will keep on until it hits the ground unless you pull up. Keeps you very focused. It can fly incredibly slowly! I can haul up the nose, maintaining constant altitude, and it just seems to slowly come to a stop in mid air before gently lowering a wing and stalling out. Glides in like an eagle for a slow flair and touches down like an autogyro. Only gripes are the canopy magnets were poorly glued causing the canopy to pop off and the airframe is so light I accidentally broke a fuselage stringer picking it up. However, for $110AUD I think this is a fantastic plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Review update: I've re-motored it with the Turnigy Aerodrive SK3 - 4240-740kv spinning a 13x7 prop. 4S 2650 Nanotech and Turnigy Plush 60amp ESC. Have been able to remove all the lead ballast from the cowl and still move the battery further aft while maintaining good CG range. It will now prop hang and go vertical until I decide to stop. As it should, this plane stays in the attitude where you last pointed it and does not self correct. For example, ease off on top of a loop and it just flies away inverted until you do something about it. Go into a shallow dive and it will keep on until it hits the ground unless you pull up. Keeps you very focused. It can fly incredibly slowly! I can haul up the nose, maintaining constant altitude, and it just seems to slowly come to a stop in mid air before gently lowering a wing and stalling out. Glides in like an eagle for a slow flair and touches down like an autogyro. Only gripes are the canopy magnets were poorly glued causing the canopy to pop off and the airframe is so light I accidentally broke a fuselage stringer picking it up. However, for $110AUD I think this is a fantastic plane.

Excellent packaging...box within box separated by airbags, so no damage. Quality of airframe and covering is excellent with no warps. Instructional CD was blank!! Downloaded Sebart PDF. Some minor discrepancies but if you have experience then no problems. Fabricated torsion box for LG mounting plate with two extra blocks...epoxy and install with tweezers...tricky. Added drag links of thin piano wire from first bulkhead back to upper portion of each gear leg. LG is now very robust. Tricky getting wheels into wheel pants. Used non-locking nut in inner side (not supplied) and lock nut on outer end. Cowling is very difficult to match up with hatch/canopy. Made a dummy foam bulkhead to force cowling up at back end to allow hatch to slip underneath. Seems to work. Installed Turnigy L3010B-1300 Brushless Motor (420w) which was going to be for smaller Yak 54. Plane was tail heavy and had to add 150gm of lead to cowling plus 2 x 3s 2200mAh packs in parallel to achieve CG. RTF weight 1900 gms, nevertheless it did fly on this motor. Removed 1 x 3s pack for 2nd flight and CG was still OK. Flew better, but have SK3 42-40 motor on order. Very stable flight, predictable yet responsive even on low throws, nice glide and moderate touchdown speed. Gorgeous looking plane. Recommended but only 4 stars overall because of blank CD and poor cowling fit.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent packaging...box within box separated by airbags, so no damage. Quality of airframe and covering is excellent with no warps. Instructional CD was blank!! Downloaded Sebart PDF. Some minor discrepancies but if you have experience then no problems. Fabricated torsion box for LG mounting plate with two extra blocks...epoxy and install with tweezers...tricky. Added drag links of thin piano wire from first bulkhead back to upper portion of each gear leg. LG is now very robust. Tricky getting wheels into wheel pants. Used non-locking nut in inner side (not supplied) and lock nut on outer end. Cowling is very difficult to match up with hatch/canopy. Made a dummy foam bulkhead to force cowling up at back end to allow hatch to slip underneath. Seems to work. Installed Turnigy L3010B-1300 Brushless Motor (420w) which was going to be for smaller Yak 54. Plane was tail heavy and had to add 150gm of lead to cowling plus 2 x 3s 2200mAh packs in parallel to achieve CG. RTF weight 1900 gms, nevertheless it did fly on this motor. Removed 1 x 3s pack for 2nd flight and CG was still OK. Flew better, but have SK3 42-40 motor on order. Very stable flight, predictable yet responsive even on low throws, nice glide and moderate touchdown speed. Gorgeous looking plane. Recommended but only 4 stars overall because of blank CD and poor cowling fit.

Seb art Su29 clone, only difference is the wheel strut stabiliser which makes orig better in KE, that is DIY, else for 1/2 the cost same spec, awesome

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seb art Su29 clone, only difference is the wheel strut stabiliser which makes orig better in KE, that is DIY, else for 1/2 the cost same spec, awesome

The model has a very good structure and

rigidity, covered with so-so, as well as

manufacturing quality.motorama looking shaky, it is

necessary to strengthen the wings to

create one cool , pleased with the

equipment and carbon =) in other matters

will collect and look for flaws in the

assembly, and so d so the maximum score

of 4, not bad for printsape hobbiking

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The model has a very good structure and

rigidity, covered with so-so, as well as

manufacturing quality.motorama looking shaky, it is

necessary to strengthen the wings to

create one cool , pleased with the

equipment and carbon =) in other matters

will collect and look for flaws in the

assembly, and so d so the maximum score

of 4, not bad for printsape hobbiking

Customer files
I changed a film.(1)) Download [268]
I changed a film.(2) Download [248]
assembly manual Download [1419]
Nivit's SU-29 (2) Download [705]
Nivit's SU-29 (1) Download [706]
Wing servo HXT 900 Download [1846]
New Colour Scheme Download [1338]
New Colour Scheme 2 Download [1308]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save