Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking ™ Süßigkeit Dropper-Modul

Hobbyking ™ Süßigkeit Dropper-Modul

Discontinued Product

Please continue searching for a similar product.
Gewicht:
310 g
SKU:
171000400-0
WANT FREE SHIPPING? Click here to find out more!

Lassen Sie Süßigkeiten oder was auch immer Ihr Herz mit dem Hobbyking ™ Süßigkeit Dropper Modul wünscht. Dieser Bolzen auf Zubehör ist eine große Ergänzung für Ihr Flugzeug. Perfekt für Demonstrationen am Modell zeigt, Fallschirm Männer fallen, oder was auch immer.

Geformt aus strapazierfähigem Nylon-Kunststoff, enthält die Süßigkeit Dropper auch zwei 9g Servos die Doppeltüren zu öffnen. Einfach montieren mit zwei Schrauben 50 mm auseinander zu der Unterseite des Flugzeugs. Unser Bix3 Modell hat bereits die in fertig geformten Halterungen zu gehen. Nicht nur für Flugzeuge, montieren die Zucker Dropper wird auch Hubschrauber und zu Multirotor-Modelle.

Specs:
Abmessungen: 270x75x50mm
Gewicht: 190g (mit Servos)
Montagelochabstand: 50 mm (Mittellinie)
Interne Bay Abmessungen: 162x65x45mm

  • Artikelbezeichnung 171000400-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 310.00
  • Länge 290.00
  • Breite 70.00
  • Höhe 90.00
  • HobbyKing™ Candy Dropper Module
  • HK Candy Dropper Module
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

i got this to bolt on to my bix 3 but the first problem was that the bolts were not long enough to catch the thread or it was just put in the wrong place so after a bit of glue to hold it in place i found one of the servos not working- i pulled it apart and they were very cheap servos and the one the broke was split open. recommend getting better quality servos

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i got this to bolt on to my bix 3 but the first problem was that the bolts were not long enough to catch the thread or it was just put in the wrong place so after a bit of glue to hold it in place i found one of the servos not working- i pulled it apart and they were very cheap servos and the one the broke was split open. recommend getting better quality servos

Nice and above all - funny!
Quality of plastic is very good.
Out of box - works, but little tweaking helps (adjusting clevises).
If you like fiddling around - you can move door links one hole down on both front and rear servo horn, little tweaking of support/holder - and you have nice mechanical setup without any servo strain.
And if you are feeling particularly sado / masochistic - you can lay the cables out of the bay, with perfectly clean room for cargo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice and above all - funny!
Quality of plastic is very good.
Out of box - works, but little tweaking helps (adjusting clevises).
If you like fiddling around - you can move door links one hole down on both front and rear servo horn, little tweaking of support/holder - and you have nice mechanical setup without any servo strain.
And if you are feeling particularly sado / masochistic - you can lay the cables out of the bay, with perfectly clean room for cargo.

These things are a total hoot! Put one under my QAV 250 clone and "delivered" some eggs I had been saving. Looked ridiculous under my quad but so much fun I had to get amoth one. Uses HXT900 servos - easily and cheaply repaired or replaced if need be.
An Excellent product!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are a total hoot! Put one under my QAV 250 clone and "delivered" some eggs I had been saving. Looked ridiculous under my quad but so much fun I had to get amoth one. Uses HXT900 servos - easily and cheaply repaired or replaced if need be.
An Excellent product!

An absolute hoot to "deliver" eggs with using my QAV/ZMR clone quadcopter! Looks ridiculous (hilarious) in flight like some kind of weird airship - the candy dropper appearing bigger than the aircraft lifting it.

Uses HXT 900 servos - easily replaced or repaired using spare gears from HK stock.

This thing is so much fun I bought a second one!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

An absolute hoot to "deliver" eggs with using my QAV/ZMR clone quadcopter! Looks ridiculous (hilarious) in flight like some kind of weird airship - the candy dropper appearing bigger than the aircraft lifting it.

Uses HXT 900 servos - easily replaced or repaired using spare gears from HK stock.

This thing is so much fun I bought a second one!

The idea behind this item is great, and the Candy Dropper Module is well made. Fits very good under the fuselage of the legendary 1800 mm Telemaster from Engel Modellbau and all its clones. Bigger planes with a wide fuselage should be able to carry 2 of them side by side. Be sure to adjust the servo travel in your transmitter carefully so the servos stop buzzing when it is closed in empty condition. Seems to be a little expensive at the first look, but it`s worth the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The idea behind this item is great, and the Candy Dropper Module is well made. Fits very good under the fuselage of the legendary 1800 mm Telemaster from Engel Modellbau and all its clones. Bigger planes with a wide fuselage should be able to carry 2 of them side by side. Be sure to adjust the servo travel in your transmitter carefully so the servos stop buzzing when it is closed in empty condition. Seems to be a little expensive at the first look, but it`s worth the money.

A lot of fun for kids and adults. I mounted mine on a sk 450. Flawless operation and easy to install.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A lot of fun for kids and adults. I mounted mine on a sk 450. Flawless operation and easy to install.

Good product. Easy mountable with velcro under the fuselage of the plane. Dropping parachutes! Attention the flightbehaviour of the plane changes !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good product. Easy mountable with velcro under the fuselage of the plane. Dropping parachutes! Attention the flightbehaviour of the plane changes !

Very nice add on. I bought this to use with the Bix3, but beware, the supplied screws are too short to use. I am using Industrial Strength Velcro and it seems to be working OK. I am not loading a lot of weight in it, just some cheap parachute men. But over all the quality is good and the price was right for me

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice add on. I bought this to use with the Bix3, but beware, the supplied screws are too short to use. I am using Industrial Strength Velcro and it seems to be working OK. I am not loading a lot of weight in it, just some cheap parachute men. But over all the quality is good and the price was right for me

This comes preassembled and it works fine. I tested it with a servo tester first. The doors need to be adjusted on mine, they don't close well and one of the servo binds. The unit is made of plastic and will probably not handle any rough stuff, especially the doors. It does not have a large carrying capacity. Keep that in mind. You won't load a bag of candy in this thing. Also the door servos carry the weight of the payload. This means they will draw extra current to hold the doors closed.

I suggest you set the end points on the channel to a low value, maybe 30pcnt to start and then adjust the end points so the doors just close and open. If you have the option, slowing the servo speed down would be a nice effect.

This could be painted with a plastic friendly pain to match your aircraft. The mounting bolts are pretty large. You could drill some more if you don't need that weight capability. Also, velcro could make installation simpler. Some industrial velcro will hold quite a bit of weight. This would be good for travel and moving to different planes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This comes preassembled and it works fine. I tested it with a servo tester first. The doors need to be adjusted on mine, they don't close well and one of the servo binds. The unit is made of plastic and will probably not handle any rough stuff, especially the doors. It does not have a large carrying capacity. Keep that in mind. You won't load a bag of candy in this thing. Also the door servos carry the weight of the payload. This means they will draw extra current to hold the doors closed.

I suggest you set the end points on the channel to a low value, maybe 30pcnt to start and then adjust the end points so the doors just close and open. If you have the option, slowing the servo speed down would be a nice effect.

This could be painted with a plastic friendly pain to match your aircraft. The mounting bolts are pretty large. You could drill some more if you don't need that weight capability. Also, velcro could make installation simpler. Some industrial velcro will hold quite a bit of weight. This would be good for travel and moving to different planes.

I servocomandi anno smesso di funzionare subito,i motori internamente presentavano dei residui di plastica che li ha bloccati,bruciandoli,inoltre gli ingranaggi si sono rotti,ora vorrei cambiarli con servi piu robusti,con ingranaggi in metallo se rieco a trovare quelli compatibil,monta i servocomandi HXT900 ,per il resto tutto ok.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I servocomandi anno smesso di funzionare subito,i motori internamente presentavano dei residui di plastica che li ha bloccati,bruciandoli,inoltre gli ingranaggi si sono rotti,ora vorrei cambiarli con servi piu robusti,con ingranaggi in metallo se rieco a trovare quelli compatibil,monta i servocomandi HXT900 ,per il resto tutto ok.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save