Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking ™ EPP Mini Edge-540T (Grün) 3D ARF

Hobbyking ™ EPP Mini Edge-540T (Grün) 3D ARF

Discontinued Product

Please continue searching for a similar product.
SKU:
9420000004-0
WANT FREE SHIPPING? Click here to find out more!

Eine große schauende und handliche Größe Semi-Scale-Modell des berühmten Edge 540 Kunstflugzeug, das alle Schaummodelle und vollständig bebauten Balsa 3D-Modelle fein säuberlich zwischen Profil fällt und ist eine wunderbare Art, eine Zehe in die Welt der 3D-Fliegen zu tauchen, oder gerade zu gehen und haben eine Explosion mit!

Das Modell verfügt über eine EPP Haut über einen Sperrholz und Kohlefaser-Strukturaufbau macht es super-leicht, stark und flexibel, wo die kleineren Stößen des täglichen Flug abschütteln benötigt, unter Beibehaltung der Skala sieht mit seiner vollständig geschnittene Motorhaube, geschwungenen Vordach, symmetrische Luftfolie und glatten Linien.

Der 540T hat große Steuerflächen, die in Kombination mit der ultraleichte Zelle für etwas vom lebhaften Sport ermöglicht, all-out 3D Fliegen fliegen, mit prop hängen, dreht sich, taumelt, Mischern und Harrier alle innerhalb der Modelle Fähigkeit.

Eine gute Qualität Hardware-Paket enthalten ist, mit allen erforderlichen Teile der Zelle bereit für die Wahl des Servos, Empfänger, ESC und Motor zu vervollständigen.

Der Hobbyking ™ Edge-540T ist ein schnell zu bauen, ein Stück Modell mit guter Anbindung an den Motor, Batterie und Fernsteuerung, so dass sie bereit sein, kann zu einem Augenblick zu fliegen, wann immer sich die Gelegenheit ergibt!

Eigenschaften:
• Vollständig verbauten EPP / Sperrholz Rumpf
• Vorgeformte Draht Fahrwerk
• Vollständig aufgeschnittene Motorhaube und Baldachin
• Symmetrische Tragfläche
• Optionale Seitenkrafterzeuger enthalten
• Starke, einteilige Konstruktion

Specs:
Spannweite: 935mm
Länge: 995 mm
Fluggewicht: 630g mit Batterie

Eingeschlossen sind:
Edge-540T EPP / Licht Sperrholz ARF Flugzeug
Alle notwendigen Hardware
Montageanleitung

Benötigt:
Ihre eigenen 4 ~ 6CH Sender und Empfänger
9 ~ 14g Servos x 4 (Metallzahnrad-Digital-Servos empfohlen)
22 ~ 28mm Brushless Outrunner Motor (900 ~ 1100KV)
30 ~ 40A Brushless Regler
8 ~ 10 x 4.7 Propeller
1000-1300mAH 11.1V (3S) LiPoly Batterie

  • Artikelbezeichnung 9420000004-0
  • Brand HobbyKing
  • Kapazität ( mAh) -
  • Gewicht 1905.0000
  • Länge 990.00
  • Breite 170.00
  • Höhe 250.00
  • HK EPP Mini Edge 540T
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This plane is absolutely gorgeous!!! I can honestly say I have never flew a plane which is more stable and flying with ease. Build is nice, overall quality is very good, all parts fit together neatly. Also designers has strengthened the constructions with carbon and wooden bars so joints, rudder etc. are tough and do not bend easily like other foamies I have had. There is simply nothing more I can ask from a foamie for this money.

My setup is Turnigy SK3-2836-1040V with 10x5 APC style, ESC - HobbyKing YEP 30A, 4x Turnigy™ MG90S and a 3S 1300mAh Turnigy nano-tech. With this configuration the plane is 714 g. The motor has plenty of power and I fly 3D with quite a lot of hoovering, harriers and rolls for 8 mins. If one go extreme 3D (I am not there yet) one should be able to fly at least 5 mins with this configuration. I will probably upload a video, but in any case I would highly recommend this product for a second 3D plane ( I started with Hummer 3D)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This plane is absolutely gorgeous!!! I can honestly say I have never flew a plane which is more stable and flying with ease. Build is nice, overall quality is very good, all parts fit together neatly. Also designers has strengthened the constructions with carbon and wooden bars so joints, rudder etc. are tough and do not bend easily like other foamies I have had. There is simply nothing more I can ask from a foamie for this money.

My setup is Turnigy SK3-2836-1040V with 10x5 APC style, ESC - HobbyKing YEP 30A, 4x Turnigy™ MG90S and a 3S 1300mAh Turnigy nano-tech. With this configuration the plane is 714 g. The motor has plenty of power and I fly 3D with quite a lot of hoovering, harriers and rolls for 8 mins. If one go extreme 3D (I am not there yet) one should be able to fly at least 5 mins with this configuration. I will probably upload a video, but in any case I would highly recommend this product for a second 3D plane ( I started with Hummer 3D)

i was intrigued by the construction of this plane and i was looking for a low wing plane, i had selected the 2826 motor and had 1300mh batteries, with that motor and the recommended prop size for the motor it was very under powered i ran a larger props 8x6 and 9x4 which helped but flight times were very short, the 2830 would probably be a better choice, in the end i went big with some mod's put a 3536 motor, 10x5 prop and 2200mh batteries(had to locate under the wing to get good cg), and it flys like a beast with long flight times.
only issue i had putting the plane together was the tail would not fit in the slot as the directions indicated, i had to put a slit in the very end of the tail to slide it in.

In the end this is a pretty sturdy plane, the design is spot on and flys very true, once trimmed and cg is correct,rapid roll rates, tight loops, it will maintain heading with hands off stick

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i was intrigued by the construction of this plane and i was looking for a low wing plane, i had selected the 2826 motor and had 1300mh batteries, with that motor and the recommended prop size for the motor it was very under powered i ran a larger props 8x6 and 9x4 which helped but flight times were very short, the 2830 would probably be a better choice, in the end i went big with some mod's put a 3536 motor, 10x5 prop and 2200mh batteries(had to locate under the wing to get good cg), and it flys like a beast with long flight times.
only issue i had putting the plane together was the tail would not fit in the slot as the directions indicated, i had to put a slit in the very end of the tail to slide it in.

In the end this is a pretty sturdy plane, the design is spot on and flys very true, once trimmed and cg is correct,rapid roll rates, tight loops, it will maintain heading with hands off stick

Now the second part of my review.
Great!!! This plane has fantastic flying characteristics and is a perfect small 3D trainer.
I fly mine with a 1400 KV motor on 3s with a 10x5 or 11x5 prop. I use 3s 1250mAh up to 2200mAh. With the small accu you have a lively 3D modell that makes a lot of fun! But also with the 3s 2200 mAh lipo the plane can manage the 3D maneuvres terrific. Highly recommended!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Now the second part of my review.
Great!!! This plane has fantastic flying characteristics and is a perfect small 3D trainer.
I fly mine with a 1400 KV motor on 3s with a 10x5 or 11x5 prop. I use 3s 1250mAh up to 2200mAh. With the small accu you have a lively 3D modell that makes a lot of fun! But also with the 3s 2200 mAh lipo the plane can manage the 3D maneuvres terrific. Highly recommended!

The rating depends on the quality and assembling! Not flown the plane yet.
Flying weight is 700g with a 3s 1250 mAh 30C. If you use lighter servos you maybe can reach 680g. The promoted 630g are not possible with a kit like mine.
One side of the wing in my kit wasn't glued correct. The cover foam layer bends and the parafoil doesn't fit therefore. Very annoying.
The fuselage was twisted, so the wing and the elevator are not parallel. No servo extensions in the kit. The linkage is weak and I changed them with ball heads.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The rating depends on the quality and assembling! Not flown the plane yet.
Flying weight is 700g with a 3s 1250 mAh 30C. If you use lighter servos you maybe can reach 680g. The promoted 630g are not possible with a kit like mine.
One side of the wing in my kit wasn't glued correct. The cover foam layer bends and the parafoil doesn't fit therefore. Very annoying.
The fuselage was twisted, so the wing and the elevator are not parallel. No servo extensions in the kit. The linkage is weak and I changed them with ball heads.

Really great 3D training plane. Flies little more like balsa planes when compared to flat fuse designs. Assembles easily, flies well, is quite compact and easily taken with you for quick flights.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Really great 3D training plane. Flies little more like balsa planes when compared to flat fuse designs. Assembles easily, flies well, is quite compact and easily taken with you for quick flights.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save