Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking ™ MX2 3D EPP 1230mm (ARF)

Hobbyking ™ MX2 3D EPP 1230mm (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9427000008-0
WANT FREE SHIPPING? Click here to find out more!

Hobbyking ™ MX2 3D EPP wurde exklusiv für 3D gebaut. Es verfügt über große Steuerflächen und eine geringe Flächenbelastung, das perfekte Rezept für einige extreme Kunstflug! Die Zelle ist eine einzigartige Mischung aus superleichtem Sperrholz darunter liegende Struktur mit der Haut der Zelle Sein dünner EPP-Schaumfolie.

Neben dem einzigartigen Hybrid-Bauweise hat der Hobbyking ™ MX2 3D EPP auch eine große vorlackiertes hohe Sichtbarkeit Farbgebung. Das heißt, es sieht gut aus und ist leicht zu orientieren während dieser extremen Kunstflugmanöver. Im Einklang mit dem leichten Gewicht und dennoch strapazierfähigem Thema, kommt der MX2 3D mit Kohlefaser-Fahrwerk und einer Kunststoff-Spornrad Einheit. Die mitgelieferte Hardware ist ausgezeichnet und dieses Modell bietet eine einfache und schnelle Build aufgrund der großen Menge an Vorfertigung. Flügel sind Plug-in , wie man es erwarten würde Transport leicht zu machen und das große Vordach ist natürlich abnehmbar zur leichten Lipoly Wechsel.

Diese sehr attraktive Hobbyking ™ MX2 bietet hervorragende Leistung auf die 3D-Pilot eingestellt reccomended sowohl für und den Sport-Flyer, die "30ep" Klasse-Modelle beliebt sind, da sie wie eine große Skala Flugzeug fliegen, sind aber relativ kostengünstig zu bauen und sind sehr praktisch . Diese MX2 ist die perfekte Allround-Modell für die Zwischen erfahrene Pilot es gut aussieht, fliegt groß, ist praktisch und macht die Erde nicht kosten, man konnte nicht mehr verlangen!

Eigenschaften:
• Fast Ready To Fly - komplette Endmontage, installieren Elektronik und Motor, fliegen!
• ultraleichtes Gewicht Licht Lagenstruktur mit dünnen EPP Haut
• 2-teilige Plug-in-Flügel
• Kohlefaser-Hauptfahrwerk
• Große magnetisch gesicherten Rumpf Luke
• Zu große Steuerflächen für umfangreiche 3D-Leistung
• Vorlackierte in hoher Sichtbarkeit Farbschema
• Komplette Hardware-Paket einschließlich Kugelgelenke, Spinner und Fiberglas Hörner

Specs:
Spannweite: 1230mm
Länge: 1190mm
Flügelfläche: 31dm2
Gewicht: 1220g

Erforderlich:
4-Kanal-Sender und Empfänger
4X12G Metallgetriebe Servos
3542 950kv
40A ESC
3S 11.1V 2200mAh LiPo Akku

  • Artikelbezeichnung 9427000008-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 2510.0000
  • Länge 1030.00
  • Breite 250.00
  • Höhe 350.00
  • HK 3D EPP MX2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just wow,

Didn't expect a plane like that.

The only bad thing are the weak wing mounting hooks.

setup:

Graphene 2200 3s
Acro Master recommend motor
Esc 50 Amps Robbe roxy

Prop APC 11x 5.5

Hitec servos
Aileron HS 65 HB
Rudder and elevator HS 81

Overall weight ~ 1,4 kg




verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just wow,

Didn't expect a plane like that.

The only bad thing are the weak wing mounting hooks.

setup:

Graphene 2200 3s
Acro Master recommend motor
Esc 50 Amps Robbe roxy

Prop APC 11x 5.5

Hitec servos
Aileron HS 65 HB
Rudder and elevator HS 81

Overall weight ~ 1,4 kg




Received mines 2 days ago and all i can say is awesome plane! came double boxed with no damages as she went together nicely. Flys like a dream and will do any 3D move in the book Also this plane is pretty light too , I use a 3542 800kv motor with a 13x6.5 prop and a 2650 4s that gives it Plenty of power!! I highly recommend this plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received mines 2 days ago and all i can say is awesome plane! came double boxed with no damages as she went together nicely. Flys like a dream and will do any 3D move in the book Also this plane is pretty light too , I use a 3542 800kv motor with a 13x6.5 prop and a 2650 4s that gives it Plenty of power!! I highly recommend this plane.

Excellent aircraft, maiden it today, very easy and excellent performances !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent aircraft, maiden it today, very easy and excellent performances !

Beautiful colour scheme, really "pops". Wing mount a bit eh with bad rubber bands (one broke after five minutes in the plane, so be sure to put in your own good rubber bands). Good stiff carbon tube spar for the main wings. Good design too, motor and wing and stabilizer all in line. Instructions in chinglish, total rubbish (if you have built anything before then don't worry, it's an easy build). Only value from manual is COG which is at 112mm. Vast space for batteries. I will use 2200 3S (has to go almost all the way to the front) and 4S (some 4cm further back compared to 3S). I put in an Aerodrive 3542 SK3 1250kv motor, fits perfectly with the included spinner and also fits the motor pod perfectly. Servos XGD-11MGB for ailerons, XGD-11MB for elevator and rudder. ESC YEP 60A. Prop 12x6E. Consumes 69A at 1002W with 4S, with storage charged battery, so take it easy with full throttle runs (but then again it should go ballistic then :-). AUW with 4S is 1439g, with 3S 1381g (1174g without battery but with all electronics). Don't squeeze it hard when lifting it, it is a bit brittle (inner structure is not very strong, so and so plywood). But really recommend this plane for the price. Will get back with more info after maiden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beautiful colour scheme, really "pops". Wing mount a bit eh with bad rubber bands (one broke after five minutes in the plane, so be sure to put in your own good rubber bands). Good stiff carbon tube spar for the main wings. Good design too, motor and wing and stabilizer all in line. Instructions in chinglish, total rubbish (if you have built anything before then don't worry, it's an easy build). Only value from manual is COG which is at 112mm. Vast space for batteries. I will use 2200 3S (has to go almost all the way to the front) and 4S (some 4cm further back compared to 3S). I put in an Aerodrive 3542 SK3 1250kv motor, fits perfectly with the included spinner and also fits the motor pod perfectly. Servos XGD-11MGB for ailerons, XGD-11MB for elevator and rudder. ESC YEP 60A. Prop 12x6E. Consumes 69A at 1002W with 4S, with storage charged battery, so take it easy with full throttle runs (but then again it should go ballistic then :-). AUW with 4S is 1439g, with 3S 1381g (1174g without battery but with all electronics). Don't squeeze it hard when lifting it, it is a bit brittle (inner structure is not very strong, so and so plywood). But really recommend this plane for the price. Will get back with more info after maiden.

A fantastic 3D flyer. Robust construction that can handle a 700W 4S setup no worries!

Very stable in harrier (inverted and upright), tight knife edge (KE) spins, fantastic blenders and flatspins. It also has minimal KE coupling and can hold very high alpha KE, more than any other 3D plane I own.

The colours are very vibrant and more durable than some other EPP hybrids. Overall I am really enjoying this plane.... more than I expected. Thanks F*ture M*del.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A fantastic 3D flyer. Robust construction that can handle a 700W 4S setup no worries!

Very stable in harrier (inverted and upright), tight knife edge (KE) spins, fantastic blenders and flatspins. It also has minimal KE coupling and can hold very high alpha KE, more than any other 3D plane I own.

The colours are very vibrant and more durable than some other EPP hybrids. Overall I am really enjoying this plane.... more than I expected. Thanks F*ture M*del.

I got the kit and it was easy to assemble. I gave it a quick check and went flying. It was uncontrollable in the air and the best I could manage was a controlled crash which ripped the gear off. Upon checking the 2 aileron servos and the rudder servos were loose and the screws stripped. Really shoddy workmanship. Check everything and glue the servos down before flying !!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I got the kit and it was easy to assemble. I gave it a quick check and went flying. It was uncontrollable in the air and the best I could manage was a controlled crash which ripped the gear off. Upon checking the 2 aileron servos and the rudder servos were loose and the screws stripped. Really shoddy workmanship. Check everything and glue the servos down before flying !!

The construction of this Model is very flimsy ,just the thinnest of a ply skelton to the fuse and then a thin layer of foam covering...not a plane to be flown in wind .Afer an easy assembly it was off to the flying field ...and thats when the Fun started
The 1st flight saw the canopy magnets let go and the canopy was lost to the wilds, after constructing another canopy the 2nd flight was not much better when the landing gear collapsed after a normal landing ,the 3rd flight ended when the Wing tore in half and the model bit the dust ...its now in my Hobby King Bin.
I think its a case of what you pay for is what you get!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The construction of this Model is very flimsy ,just the thinnest of a ply skelton to the fuse and then a thin layer of foam covering...not a plane to be flown in wind .Afer an easy assembly it was off to the flying field ...and thats when the Fun started
The 1st flight saw the canopy magnets let go and the canopy was lost to the wilds, after constructing another canopy the 2nd flight was not much better when the landing gear collapsed after a normal landing ,the 3rd flight ended when the Wing tore in half and the model bit the dust ...its now in my Hobby King Bin.
I think its a case of what you pay for is what you get!

Excellent design and flight carecteristcs, only no servo arm extensions supplied, also the tail wheel gear is weak, I replaced it with the one of edge 540 crashed which is stronger.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent design and flight carecteristcs, only no servo arm extensions supplied, also the tail wheel gear is weak, I replaced it with the one of edge 540 crashed which is stronger.

Arrived today from DHL shipping....its nice beautiful plane with parts.....but there is no larger servor arm for 3d not with the package....so next time have to buy all other accessories of this plane soon....thank you hobby king

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived today from DHL shipping....its nice beautiful plane with parts.....but there is no larger servor arm for 3d not with the package....so next time have to buy all other accessories of this plane soon....thank you hobby king

Customer files
Manual for similar model Download [1265]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save