Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Hobbyking ™ Typhoon 3D Balsa 1250mm (ARF)

Generating Links

Hobbyking ™ Typhoon 3D Balsa 1250mm (ARF)

Preis:

Now save speichern 0,00 € 0,00 €

127,31 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
9110000031-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Der Hobbyking Typhoon wurde exklusiv für 3D gebaut. Dieses Balsa und Sperrholz airfame kommt fast fertig mit großen Steuerflächen und eine geringe Flächenbelastung, das perfekte Rezept für einige extreme Kunstflug zu fliegen!

Beim Öffnen der Box werden Sie auf eine hohe Fertigungs begrüßt. Installieren Sie einfach Hardware, Elektronik und komplette Endmontage zu fliegen, bereit zu sein. Erfahrene Modellierer können die Typhoon bereit in einen Abend oder zwei der Arbeit zu fliegen.

Steuerflächen sind mit CA Scharniere angelenkt ist. Flügel montiert Querruder- und ein Heck montiert Aufzug Servo hält Steuerstäbe kurz und präzise, ​​während die Ruderservo vorne mit Pull-Pull-Kabel läuft an der Rückseite angebracht ist, halten zusätzliche Gewicht aus dem Schwanz.

Aluminium-Fahrwerk und lackiertem Fiberglas Motorhaube und Radverkleidungen runden das umfassende Paket Typhoon aus. liefern Sie Ihre Wahl von Motor, Akku und Elektronik, ein paar Bauklebstoffe, und Sie werden eingestellt.

Die sehr attraktive Hobbyking Typhoon 3D bietet hervorragende Leistung für 3D-Piloten und dem Sportflieger. Dies ist die perfekte Allround-Modell für den erfahrenen Piloten Zwischen wie es gut aussieht, fliegt groß, ist praktisch und nicht die Welt kosten, man konnte nicht mehr verlangen!

Eigenschaften:
• Almost Ready to Fly - komplette Endmontage und Ihre Wahl der Batterie und Funksystem installieren
• Erschlossen Balsa und Licht Sperrholz Zelle
• 2 Stück Plug-in-Flügel
• Gut sichtbare Farbschema mit unterschiedlichen oberen und unteren Farben zur einfachen Orientierung
• Zu große Steuerflächen für umfangreiche 3D-Leistung
• Vorlackierte in Fiberglas Motorhaube und Radverkleidungen
• Komplette Hardware-Paket einschließlich Pull-Pull-Kabel für Ruder

Specs:
Spannweite: 1250mm
Länge: 1106mm
Gewicht: 1350g w / o Batterie
Flügelfläche: 29,13 dm2

Erforderlich:
4-Kanal-Sender und Empfänger
Servos: 4x digital Metallgetriebe 12g
40A Brushless Regler
35mm Outrunner Motor (500-600 Watt)
3S 11.1V 2200 ~ 2600mAh LiPo Akku

  • Typhoon EP
Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Kevin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

typhoon

Dec 17, 2017

definitely under NO circumstances, try fly this without removing the skin from elevator and fill all gaps with balsa and then reskin. i have bought 2 of these and both had epic elevator collapse. the first plane was destroyed after the elevator broke up mid flight and jammed in rudder. i had a close call with the second one and have now reinforced elevator, and hope to enjoy more flights with it as they do fly great once modified.

Kevin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

typhoon

Oct 11, 2017

just received my second one of these. i did not realise the hinges in the elevator were not glued properly and had a failure mid air and run out of luck, altitude, and ability and turned the typhoon into a tropical low. it did however fly like a dream before the appocolypse..look forward to getting the new one airborne soon

Parvulescu | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Installation, flight, defects

Oct 30, 2016

The engine used is a Turnigy D3542 / 6 1000kVA.
Corona 939MG Metal Gear Servo Servo are 2.5kg / 0.14sec / 12.5g.
The battery is 2200mAh 3S 40C Turnigy
The propeller 11x5,5
ESC TURNIGY Plush 60amp
Glues used: Epoxy and CA glue.
I installed servo on ailerons. The problem is that the cut is larger than the servo. I cut some rectangles of plywood and I glued with epoxy on the inside.
Wing cross pins in the aircraft fuselage must be stabilized with care. The holes are not centered.
The hinges of the ailerons must be positioned perpendicular to the slit wing to penetrate CA glue. This is not mentioned in the manual.
I mounted horizontal stabilizer, and when I mounted the elevator I bent wire that fixes the two sides of the elevator. Care should be taken. I turned this after curing epoxy.
Vertical stabilizer after removing the foil must be mounted at 90 degrees to the horizontal stabilizer. To me have a little movement.
At the rudder I added another hinge.
I added the rudder servo for some rectangles of plywood on the inside in order to fix the servo.
To fix the hood must stick pieces of balsa fuselage. In this manual is not detailed. The screws must enter those pieces of balsa.
Be careful not to move the bonnet and engine to rub it.
Cross holes in the motor does not match the holes made by the manufacturer.
I cut a piece of plywood and we stuck it behind the bed frame. I gave other holes.
First flight - horizontal stabilizer was broken in flight. I had to reinforce it with pieces of balsa placed diagonally.

Finally stabilizer was broken in the air. Total destruction. Stabilizer poorly designed.

maverick4you | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

May 12, 2016

Semplicemente perfetto! acquistato quando in promozione e' stata una piacevole sorpresa. Molto simile nelle dimensioni al Su-20 classe 30 della Sebart.
Costruzione ottima e copertura perfetta. in volo e' visibilissimo.
il mio l'ho motorizzato con un Turnigy 35-42/6 da 1000kv esc da 50A, elica APC 13x6,5. con una batteria 3s da 2200mha il modello e' perfettamente bilanciato.



Simply perfect! purchased when in promotion and 'was a pleasant surprise. Very similar in size to the Su-20 class of 30 Sebart.
excellent and perfect cover construction. in flight and 'highly visible.
I have my motor with a Turnigy 35-42 / 6 1000kV esc 50A, propeller APC 13x6,5. with a 3s battery 2200mha the model and 'perfectly balanced.

V-Man | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 13, 2015

Got this plane in the recent "free shipping" sale. Not sure I would have gotten it if I had to add $70 in shipping and custom fees, so thanks HK. It's pretty nice! Needs quite a bit of work, tighten up the covering job, some glue joints need attention, locating holes for servos and pushrods. Cowling paint job is a bit sloppy; will need cooling holes cut into it. The tail surfaces will need reinforcement they're way too thin and flimsy to stand up to violent 3D maneuvers (I will add a carbon spar). Nice touch, though, all the control surfaces are pre-hinged, just glue it together. Manual is poor but anyone who assembled a plane before will do just fine. Overall, I'm happy with my purchase.

Kundendateien
Typhoon EP Manual Download [576]
Unboxing Download [1321]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör