Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

HXT 2730 DIY-Kit

HXT 2730 DIY-Kit

Discontinued Product

Please continue searching for a similar product.
SKU:
HXM2730-DIY
WANT FREE SHIPPING? Click here to find out more!

Hier ist es!
Die DIY-Kit des beliebten 2730-Motor.
Wind für Kvs von 900 bis 6000rpm / v
Draht-Lehre: .44mm
Gewicht des Motors kann nicht bestimmt werden, da sie mit zusätzlichen Draht kommt, Schrumpffolie usw.

11 Schaltet Y Config 8 Magneten für 1700kv
14 Schaltet Y Config 8 Magneten für 1300kv

Experimentieren Sie mit Drehungen und Magneten Ihre eigene Leistung Motor zu machen.
Immer den Draht straffer und sauberer als jede Fabrik kümmern würde, zu bieten ermöglicht es Ihnen, maximale Leistung von diesem bereits beeindruckenden Motor zu drücken!

Hervorragend geeignet für kleine foamies besonders GWS pico Flugzeuge.

Die TowerPro Motor hier gezeigten Halterung kann für diesen Motor verwendet werden;
https://www.hobbyking.com/hobbyking/store/comersus_viewItem.asp?idProduct=3613

  • Artikelbezeichnung HXM2730-DIY
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 45.0000
  • Länge 148.00
  • Packaging Width 10.00
  • Höhe 16.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Super stuff to DIY and understand motor basics, doesn't come with any manual, however they are available in the files tab, so go right ahead and do some exprement

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Super stuff to DIY and understand motor basics, doesn't come with any manual, however they are available in the files tab, so go right ahead and do some exprement

Very noce and cheap - good for "learning brushless motors".

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very noce and cheap - good for "learning brushless motors".

motors came in good time,they were complete and the build went good. dont really have any serious complaints and would buy again. used all 16 mags 13T wye 1209KV 11.27 V it doesnt like small props rather anything from 8-10 but watch the heat. the motor ran very smooth, looks like another version of the blue wonder

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motors came in good time,they were complete and the build went good. dont really have any serious complaints and would buy again. used all 16 mags 13T wye 1209KV 11.27 V it doesnt like small props rather anything from 8-10 but watch the heat. the motor ran very smooth, looks like another version of the blue wonder

j'ai acheter 2 kit moteur ordre:2001813847 code1h25393858 que j'ai recu pas de support moteur, pas de repere aiment, et surtout pas de notice de cablage donc impossible de faire ce kit dommage

bonne fete a tous

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

j'ai acheter 2 kit moteur ordre:2001813847 code1h25393858 que j'ai recu pas de support moteur, pas de repere aiment, et surtout pas de notice de cablage donc impossible de faire ce kit dommage

bonne fete a tous

Great little kit to learn the "ins and outs" of a brushless motor. Fit and finish were very good on my kit and all parts could be pressed together by hand with the help of a flat (soft) wooden surface.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great little kit to learn the "ins and outs" of a brushless motor. Fit and finish were very good on my kit and all parts could be pressed together by hand with the help of a flat (soft) wooden surface.

Very nice set, especially since the 1500kV is sold out. I use them in my Epp Shockfliers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice set, especially since the 1500kV is sold out. I use them in my Epp Shockfliers.

Three minor bad things first, the sticky board it comes on is horrible. should be in a small box or something. second, The can is hard to press together. Third, no instructions. After that, what fun!! I wound 8T delta.

Tested using 3s 25C hyperion lipo and CC t-bird 9

22,300 rpm @ 11.88V 4.40A APC 4.2x2

18,800 rpm @ 11.70V 9.66A APC 4.7x4.25

Used on my Fun Foam F-15 profile pusher. Flies 55~60mph. Comes down cool! esc is only warm!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Three minor bad things first, the sticky board it comes on is horrible. should be in a small box or something. second, The can is hard to press together. Third, no instructions. After that, what fun!! I wound 8T delta.

Tested using 3s 25C hyperion lipo and CC t-bird 9

22,300 rpm @ 11.88V 4.40A APC 4.2x2

18,800 rpm @ 11.70V 9.66A APC 4.7x4.25

Used on my Fun Foam F-15 profile pusher. Flies 55~60mph. Comes down cool! esc is only warm!

Good and cheap Motorparts.

Very good quality and easy to build.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good and cheap Motorparts.

Very good quality and easy to build.

This is a good site for winding information of brushless motors.

http://www.bavaria-direct.co.za/models/motor_info.htm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a good site for winding information of brushless motors.

http://www.bavaria-direct.co.za/models/motor_info.htm

look fun and interesting to diy a motor on my own.



so brought one to try. qualtiy and packaging look good.



will update when i gt it done and working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

look fun and interesting to diy a motor on my own.



so brought one to try. qualtiy and packaging look good.



will update when i gt it done and working.

  1. 1
  2. 2
  3. 3
Customer files
ABCABCABCABC for 8 or 16 magnets/magnusE Download [105]
dLRK for 10 or 14 magnets/magnusEl Download [103]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!