Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

HXT 2835 (380S) 2700kv Brushless Inrunner

HXT 2835 (380S) 2700kv Brushless Inrunner

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
150 g
SKU:
HXTBS-2835C-2700

Combine

essential items and
battery
servo
motor
Product
Description

Motorgröße: 2835 (380S)
Geschwindigkeit: 2700kv
ESC erforderlich: 25A
Spannungsbereich: 6 ~ 12V
No Load Curr: 1.2A
Max Belastung: 35A

Durchmesser: 28.2mm + Kühlkörper (4 mm)
Länge: 37 mm
Montage Frontlochabstand: 19 mm
Frontmontage Gewindegröße: M3
Wellen - Durchmesser: 3,175 mm
Schaftlänge: 12mm
Gewicht: 98.7grams (einschließlich Kabel und Stecker)

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    HXTBS-2835C-2700
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    150.00
  • Länge
    0.00
  • Breite:
    0.00
  • Höhe:
    0.00
  • Kv (rpm / v)
    2700.00
  • Max Currents (A)
    35.00
  • Leistung ( W):
    0.00
  • Länge B (mm):
    37.00
  • Kann Länge D (mm)
    35.00
  • Max Spannung (V)
    12.00
  • Welle A ( mm):
    3.00
  • Unit Weight (g):
    98.7
  • Durchmesser C (mm)
    34.00
  • Gesamtlänge E ( mm)
    49.00
  • Widerstand ( mh):
    0.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Put this on a 48" Zagi with a 3S 2200 30C NanoTech LiPo and a 40A Blue Series ESC and an APC 6x4. It provides excellent performance for the price. Getting up to 11 minutes with throttle management. The motor gets hot but the heatsink does an excellent job.

Lo us en un Zagi de 122cm con una lipo 3S 2200 30c NanoTech y un regulador "Blue Series" de 40A y una helice APC 6x4. Es un excelente valor considerando el nivel de rendimiento que provee. Logr vuelos de 11 minutos con sta configuracin y buen manejo del acelerador. El motor se calienta bastante pero el disipador de calor funciona muy bien.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful in runner! I used it in a 1,8m wingspan glider, with fold propeller and 1800mAh 3s LiPo.



Alex
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Enough Power for TT01, low temps on Motor and Spinning Wheels on 3s! I use 19T...
Needs 40A ESC with Fan. The 30A Quik ESC is to weak. After 30m with 3 Times full throttle is the ESC verry hot!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
fantasti motor las tres bbb

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Silnik bardzo adnie wykonany.Dziaa bez zarzutow.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It came with no screws, and the size of the internal holes is not standard (beetween M2,5 and M3).

The internal part of the shaft have a diameter of 4mm although the end of it is reduced to 3,175mm. Maybe is possible to replace it with a stronger 4mm one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The good motor. Has put on mini inferno 09, altered from Gas Engines. Pushes approximately to 40 km\ch
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
My Tests on 3S 2650mah with TowerPro H40A ESC:



APC 6x3, 21450 RPM, 25.7A at min voltage 10.8V = 277 watt.



APC 6x4, 19890 RPM, 26.2A at min voltage 10.7v = 280 watt.

Computed thrust 874g, watt out 169w, ETA 70%
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3S 2650mah battery, HK 40A esc, APC 4.75x4.75 prop gives 22.5A, 250 watts.

Motor got warm but not hot after 20 seconds at full throttle. I think 35A is a bit optimistic.

A 6x4 prop that many people commenting here use will probably work well, giving less speed and more thrust.

The motor is well made, there is no play in the shaft of mine.

I had to use sandpaper on the shaft to fit my 3.2mm prop adapters (3 different ones, all slightly too tight
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this motor is a perfect buy... i purchased it for my hovercraft... the heat sink is a very good addon to the motor...
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
battery
servo
motor

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.