Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Illuminati 32 Flight-Controller mit OSD (Cleanflight unterstützt)

Illuminati 32 Flight-Controller mit OSD (Cleanflight unterstützt)

Shipped From:
  • USA
QTY:

Now save Speichern 20,53 € 20,53 €

Special Price 8,56 € 8,56 €

You save Speichern 20,53 € 20,53 €

Was  29,09 €

Status:
Auf Lager
Gewicht:
42 g
SKU:
9650000004-0
WANT FREE SHIPPING? Click here to find out more!

Illuminati 32 Flight - Controller mit OSD

Die Illuminaten 32 sorgt für Ihr Rennen Rig ist ein Navigatoren durch, die eine 32-Bit-Flugregler sowie ein OSD in der gleichen kleinen Paket erfreuen. Jetzt können Sie alle Ihre Flugdaten erhalten direkt auf Ihrem Display.

Im Herzen der Illuminaten 32 ist ein 32-Bit-ST Micro Arbeitspferd Prozessor, mit ungenutztem Speicher und CPU-Leistung und eine Vielzahl von Sensoren ebenso beeindruckend. Die Illuminaten 32 ist Cleanflight für einfache Einrichtung und Nutzung unterstützt. Abgestimmt mit einigen der schönsten GUI-Programme und Funktionen, das Beste aus Ihrer Konfiguration zu erhalten. Dieser Aufbau verleiht Ihrem Quad schnelle Reaktion Grimassen Brise fliegen.

FPV Fliegen wird noch besser, wenn das OSD-Menü mit der überlagerten Video- und Flugdaten in Echtzeit während des Fluges gibt. Das OSD kann mehrere Fluginformationen Spezifikationen einschließlich Stromspannung, Fluggeschwindigkeit, Höhe und Entfernung von der Heimat Punkt, horizontale Einstellung und GPS-Satellitennummer angezeigt werden und so weiter abhängig von den Sensoren, die Sie angeschlossen haben.

Dieser Flug-Controller fliegt genauso wie die besten, aber jetzt sind Sie sparen Gewicht, so dass Sie den Rest überholen kann.

Eigenschaften:
• kombinierte 32-Bit-Flight-Controller mit KV OSD auf dem ein kleines Paket
• 32-Bit-ARM-Mikroprozessor für schnelle Geschwindigkeit und schnelle Reaktion
• Flugregler Cleanflight unterstützt
• KV OSD Echtzeit und genaue Flugdaten geben auf dem Bildschirm überlagert
• Gyro, Beschleunigungssensor und Drucksensor. Akrobatische, automatische Niveauregulierung, Heading Hold, Kopf frei, Höhen- Flugmodus
• Bis zu 8 ch RC-Eingang - unterstützt Standard-Empfänger (PWM), PPM Sum Empfänger (FrSky, usw.), oder Spektrum Satelliten-Receiver
• Extra-Sensor wie GPS und Kompass können hinzugefügt werden,
• in einem Hartschalenkoffer verpackt
• über den USB-Upgrade

Specs:
Montage: 30,5 mm (ohne Gehäuse)
Abmessungen: 39x39x12mm (falls)
Gewicht: 12,3 g (falls)

im Lieferumfang enthalten:
1 x Illuminati 32
1 x Kabelsatz
1 x-Handbuch

  • Artikelbezeichnung 9650000004-0
  • Brand Unknown
  • Kapazität ( mAh) -
  • Gewicht ( g) 42.00
  • Länge 65.00
  • Breite 30.00
  • Höhe 60.00
  • illuminati 32 Flight Controller
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I have three of these. All are working great. The OSD makes it awesome. Set it up tame or radical. Very good FC for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have three of these. All are working great. The OSD makes it awesome. Set it up tame or radical. Very good FC for the money.

This thing is amazing, i was previously using a kk2.... never again! This is as solid as a rock!! The OSD is super handy as well mainly for the battery voltage, at first i was struggling to find info on it and then found is basically just a Naze board so i followed all the instructional vids for that and wolla! sorted!

If you go to international page and view the files ta you will also find some very handy info there!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This thing is amazing, i was previously using a kk2.... never again! This is as solid as a rock!! The OSD is super handy as well mainly for the battery voltage, at first i was struggling to find info on it and then found is basically just a Naze board so i followed all the instructional vids for that and wolla! sorted!

If you go to international page and view the files ta you will also find some very handy info there!

Just got this fc and seems ok but the manual is a pin out card showing the different dip switch settings, an trying to wor out the setup but isn't as document as I was led to belive.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got this fc and seems ok but the manual is a pin out card showing the different dip switch settings, an trying to wor out the setup but isn't as document as I was led to belive.

This is quite a nice board, It's only issues are with it's leads. It has female plugs on all of them, So while it can connect to your RX without problem, You need to find a work around for the ESC's. For testing I cut lengths of paperclip to go between the plugs. This allowed me to check everything was working before I cut off the original connectors and crimped on some male sockets (Available here under "JST-SH Servo Plug Set"). The other niggle is that unless you're building a hexacopter with FTP you'll have spare wires hanging about without anywhere to go. You could clip them off, But if you ever swap it over to another airframe that could use them you'll have problems finding replacement leads. The instruction "Leaflet" is a bit sparse on info, But it's pretty much a just normal Naze32 with attached wiring (And no soldering required !) and the internet's full of instructional videos and articles on how to plug it all in. So, Apart from the small gripes I've mentioned, Am I happy with it?...... Yes, Very much so. It holds my FTP250 rock solid in the air and it's easy to setup. In my mind that more than outweighs the issues with the supplied wiring.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is quite a nice board, It's only issues are with it's leads. It has female plugs on all of them, So while it can connect to your RX without problem, You need to find a work around for the ESC's. For testing I cut lengths of paperclip to go between the plugs. This allowed me to check everything was working before I cut off the original connectors and crimped on some male sockets (Available here under "JST-SH Servo Plug Set"). The other niggle is that unless you're building a hexacopter with FTP you'll have spare wires hanging about without anywhere to go. You could clip them off, But if you ever swap it over to another airframe that could use them you'll have problems finding replacement leads. The instruction "Leaflet" is a bit sparse on info, But it's pretty much a just normal Naze32 with attached wiring (And no soldering required !) and the internet's full of instructional videos and articles on how to plug it all in. So, Apart from the small gripes I've mentioned, Am I happy with it?...... Yes, Very much so. It holds my FTP250 rock solid in the air and it's easy to setup. In my mind that more than outweighs the issues with the supplied wiring.

Not a bad board. From what I can tell.. it's a Naze32 preflashed with Cleanflight 1.8.1. You can easily flash it with the newest clean flight... just make sure you do the dip switch to FC.

The OSD seems to be a MinimOSD preflashed with KV OSD 2.2. I was able to flash it to MinimOSD and mwOSD codes but went back to KV OSD cause it does not seem to communicate well with the FC. You can use KV OSD to change the layout.

Also hooked up the Micro HKPilot GPS And Compass u-Blox NEO-6 and was able to get both the compass and GPS working! Sweet! I followed the instructions in the Files section.

Overall... pretty good especially for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Not a bad board. From what I can tell.. it's a Naze32 preflashed with Cleanflight 1.8.1. You can easily flash it with the newest clean flight... just make sure you do the dip switch to FC.

The OSD seems to be a MinimOSD preflashed with KV OSD 2.2. I was able to flash it to MinimOSD and mwOSD codes but went back to KV OSD cause it does not seem to communicate well with the FC. You can use KV OSD to change the layout.

Also hooked up the Micro HKPilot GPS And Compass u-Blox NEO-6 and was able to get both the compass and GPS working! Sweet! I followed the instructions in the Files section.

Overall... pretty good especially for the price.

Absolutely through best value for the size and price.

Can do everything including GPS
Just requires some basic multiwii knowledge and the rest is peanuts.
Flashing and how to has been added now, but even without it, Google is your friend. OSD rocks and flies all configurations rock solid.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Absolutely through best value for the size and price.

Can do everything including GPS
Just requires some basic multiwii knowledge and the rest is peanuts.
Flashing and how to has been added now, but even without it, Google is your friend. OSD rocks and flies all configurations rock solid.

It arrived today but no manual. Just 60mm square piece of paper with the product description on it? HK, please info where this manual can be downloaded

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It arrived today but no manual. Just 60mm square piece of paper with the product description on it? HK, please info where this manual can be downloaded

Customer files
notes Download [2]
Illuminati32 GPS info Download [2]
Illuminati32 GPS info Download [2]
Manual Download [317]
Diagram and dip switches leaflet Download [61]
Bootloader_short Download [510]
Board Back Download [79]
Board Top Download [645]
Factory config dump Download [7]
Illuminati OSD setup guide Download [1]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!