This combo contains:
ImmersionRC Vortex 250 PRO ARF w/ Zipper Case *1 (Qty:1)
Quanum Cyclops V2 FPV Goggle w/ Integrated Monitor and 40ch Receiver *1 (Qty:1)
Turnigy Evolution Digital AFHDS 2A Radio Control System w/TGY-iA6C Receiver (Black) (Mode 2) (Qty:1)
HobbyKing 5050 Bullnose PC Propellers (CW/CCW) Black : Qty:20
ImmersionRC Vortex 250 PRO ARF w/ Zipper Case
ImmersionRC have excelled again with this new Vortex 250 PRO. The Vortex 250 Pro builds on excellence of the Vortex 285 as well as using great feedback from top pilots and dreams of customers to take the Vortex 250 Pro to the next level. The Vortex 250 Pro comes with a lots of updated systems and new goodies integrated into a pure-bred racer.
The magic keeps coming with a next generation Fusion Gen2 Flight Controller comes with new integrated 32-bit “F3” processor (2x the performance of the previous version) with pre-loaded custom built Cleanflight software. Now there is also integrated a BlackBox recorder which is used as an extremely powerful tool to tweak you PIDs to perfection. The on-board full graphic OSD not only provides in-flight parameters it now sports a menu to set up your controller in the field using your flight controller and goggles or monitor (without the need for a laptop). Setup using either preprogramed setups or build your own. There are also several pre-programed OSD layouts that can be used. Look like a HUD of a fighter jet or a race layout with the data around the edges.
Motors have been upgraded from 1806’s to V-Spec 2204-2300KV motors and the 16A ESCs to Custom V2 20A EzESC with Oneshot125 and rotorSENSE. The frame has also changed to a have flat 4mm carbon fiber arms.
There is still the punchy, integrated, 5.8GHz video transmitter with 350mW output power with 40CH selection and a SpiroNET Tx antenna. Easily allowing for channel separation. All channel setup via the OSD.
The lighting system has also been upgraded to version 2 and is sandwiched between the upper and lower frames at the rear of the quad. They are controlled by their own processor to allow them to be programed to what you like. The lighting options are endless. An upgraded ear-piecing Lost Model Alarm to help find your “lost” quad.
To keep your new Vortex 250 PRO safe travelling to and from your flying zone we have included an ImmersionRC Zipper case.
Just add a compatible R/C Rx (EzUHF preferred of course), and a battery, and go fly, everything else is included.
• 3k Twill-weave Carbon Fiber and custom injected plastic design
• 250 sized Race Quad with 4mm Carbon Fiber arms
• 2204-2300kV V-Spec Motors
• 2nd Gen Custom 20A EzESCs with OneShot125
• Integrated “F3” Flight Controller, pre-loaded with Cleanflight
• Race-tuned out of the box
• Integrated full-graphic OSD, with on-screen control of.... Everything
• Pro-tuning options, select your favorite pilot!
• On-board BlackBox recorder to aid in pro-tuning (2MB)
• Integrated 40 channel NexWaveRF 5.8GHz Video Tx with Dynamic Power Control
• Direct connection to CPPM, Spektrum, S-Bus, XBus, SumD, SumH receivers
• Ear-piercing Lost Model Alarm (much louder than its predecessor)
• Tillable, Vibration-free Camera mount
• GoPro 3/4 mount included
Weight: ~415g without battery, or HD camera
Motors: 2204-2300 (CW and CCW)
ESCs: Custom “Gen2” EzESC 20A (22A peak) OneShot125, rotorSENSE
Power Requirements: 3s-4s LiPoly
Arms: 4mm Flat Carbon Fiber
Flight Camera: FatShark 700TVL CMOS v2
HD Camera: GoPro Hero, Hero 3/4 (not included)
Receiver Support: CPPM, S-Bus, Spektrum™ XBus, SumD, SumH
1 x ImmersionRC Vortex 250 PRO Race Quad
1 x Spare set 5045 bullnose Propellers
1 x Anti slip mat
1 x Mount for GoPRO 3/4
Quanum Cyclops V2 FPV Goggle w/ Integrated Monitor and 40ch Receiver
Quanum set the world into a spin when they released the revolutionary Cyclops FPV goggles. Some people say the sequel is never as good as the original.
Well, the Empire strikes back with the Quanum Cyclops V2, with the same features that made the Cyclops a heavyweight in the FPV community the version 2 has this and more.
The team at Quanum have listened adding new features and improving the original ones. Features such as a new receiver, now you can select your desired frequency or auto scan the 40 channels covering A, B, E, F and Race band with the push of a button just like the V1. AV in for ground station support and RF out giving you the option the capture your race or flight and record and review the action and an extra mount for the Quanum Head Tracker. It's everything you need for FPV flying.
Quanum Cyclops V2 is Lightweight and super comfortable, one of the best FPV Goggles on the market today just got better using an upgraded strap with floating rear mounted battery pouch for optimum weight distribution, Improved soft sponge rubber facial foam lined with smooth sweatband material for maximum comfort. New upgraded Video drivers for clearer image. The one piece molded plastic shell design still allows for those that need to wear glasses during FPV flying and RC drone racing.
The 5”, 800 X 480 non-blue screen monitor and integrated 40 Channel Race band compatible receiver maximizes the users immersive FPV experience.
A true Plug and Play solution that is compatible with Jack, XT60 or even 9 Volt style battery plugs can be used with 7.4 to 12.6 Volt power inputs.
Get immersed and enjoy the freedom and world of FPV flying.
• Plug & Play
• AV in & RF Out
• Selectable frequency
• 5” TFT Monitor with new 3X magnification lens
• 800 X 480 non-blue screen monitor
• Focal length adjustment
• Design allows use with glasses
• Extra comfortable sponge rubber cushioning strips for facial comfort
• Adjustable elastic 3 position head strap
• Durable lightweight plastic molded shell
• On Screen Menu with adjustable contrast and brightness controls
• 3 Types of battery connections
• 1-button Automatic channel scanning
• 40 channels covering A, B, E, F and Race band
• 7.4 to 12.6v input range
Operating Voltage: 7.4 -12.6v
Receiver: -90 dBm ISM 5.8GHz 40ch
Antenna connections: SMA
Operating Current: 600mA
Dimensions: 187(L) x 179(W) x 107(H)mm
Weight: 390grams without batteries
Turnigy Evolution Digital AFHDS 2A Radio Control System w/TGY-iA6C Receiver (Black) (Mode 2)
Qty : 1
The engineers at Turnigy have come up with another winner, the Turnigy Evolution. Designed with the FPV Drone flier squarely in mind, the Evolution features a striking new look and is amazingly compact. Its small size makes it very backpack friendly and the neat cover for the front of the controller keeps the face and gimbals safe during transportation.
The Evolution uses the solid and reliable 8 channel 2.4GHz Automatic Frequency Hopping Digital System (AFHDS 2A) spread spectrum technology, making it compatible with the iA6, iA6B, iA6C, i10 & i10B range of receivers. The system is supplied with the Turnigy TGY-iA6C Receiver for SBUS/IBUS and CPPM/PWM support. Twin omnidirectional high gain antennas are built into the outer case to provide an even more secure radio link and to protect them from damage.
The ergonomically designed case makes for easy use of all controls. The switches and pots are all positioned for comfort and the adjustable length sticks can be tailored to your own requirements. Speaking of sticks, the high quality, ball bearing gimbals are clear and have color changing, programmable LEDs that can change color with the use of the sticks. There is a pop-up potentiometer that could be used for camera gimbal control. Two 3-position switches on the back can easily be set-up to change the flight modes. A large monochrome backlit LCD Touch screen makes it easy to program and change the settings in both daylight and night-time. Five model memories make it easy when swapping from one model to next by simply selecting the appropriate model memory (assuming that you've bound the next receiver to the particular model memory first!)
Each transmitter and receiver has its own unique ID to prevent other RC systems from accidentally connecting to or interfering with the Evolution.
Each transmitter hops between 16 channels in order to reduce interference from other transmitters. There is even a mini USB port for easy charging via a power bank (power pack) or phone charger / USB charger / PC. This can also be used for updates (via PC) or to use the Evolution transmitter as a controller for your favorite RC simulator programs.
The Evolution comes in either Mode 1 and Mode 2 and is available in black or white for each mode.
Note: All customers who have updated there Turnigy Evolution firmware to 0.0.9.23 (3-Mar-2017) are advised to upgrade to the firmware HK-MT6 0.0.9.31X (available on the product files tab on our website). There has been an issue with the firmware update (March 2017) 0.0.9.23 that may cause incorrect operation with the FS-A8S receiver. This is only applicable to customers who have manually updated their firmware. all factory supplied firmware is not affected and should be updated to firmware HK-MT6 0.0.9.31.
• AFHDS 2A RF protocol
• Compatible with the iA6, iA6B, iA6C, i10 & i10B range of receivers
• 8 channel 2.4ghz radio with telemetry capability
• i10 style customized Gimbals with dual ball bearing supports
• Illuminated gimbals (adjustable)
• Soft rubber grips
• Easy to use touch screen
• SBUS/IBUS and CPPM/PWM support
• 5 Model Memory
• Backlit LCD Screen
• 4 Stick Mode Selection
• USB port for Flight Simulators
• USB charging
Model type: Multi-rotor/Drone
RF range: 2.408~2.475 GHz
Bandwidth: 500 KHz
RF channel: 135
Protocol: AFHDS 2A
Modulation type: GFSK
Stick resolution: 4096
Low voltage alarm: Yes (<3.7V)
USB Port: Yes
Power input: 3.7V
Weight: 332g (without cover)
Certificate: CE0678, FCC ID:N4ZMT600, RCM
HobbyKing 5050 Bullnose PC Propellers (CW/CCW) Black (1 pair)
HobbyKing Propellers have been built with the multi-rotor enthusiast in mind. A lightweight, high quality and excellent value propeller. They come in an assortment of colors to help with orientation or just for that fun look.
They come packaged as a pair, with one CW rotation and one CCW rotation.
Size: 5050 (5"x 5")
Weight: 8.4g (pair)
1 x CW Propeller
1 x CCW Propeller
Gewicht ( g)