Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global
  • USA

KD 63-20L Brushless Outrunner 235Kv

KD 63-20L Brushless Outrunner 235Kv

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
650 g
SKU:
KDA63-20L
Product
Description

Kv: 235rpm / v
Batterie: 8-12S
Max Amp: 69
Prop: 22x12
Schachtgröße: 8.0mmx24mm
Motor Abmessungen: 63mmx66mm
Gewicht: 650g

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    KDA63-20L
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    650.00
  • Länge
    0.00
  • Breite:
    0.00
  • Höhe:
    0.00
  • Kv (rpm / v)
    235.00
  • Max Currents (A)
    69.00
  • Leistung ( W):
    0.00
  • Länge B (mm):
    66.00
  • Kann Länge D (mm)
    37.00
  • Max Spannung (V)
    37.00
  • Welle A ( mm):
    8.00
  • Unit Weight (g):
    650
  • Durchmesser C (mm)
    63.00
  • Gesamtlänge E ( mm)
    90.00
  • Widerstand ( mh):
    0.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Too sad, onece again after the NTM serie, this motor as lost magnet.

The load and speed was far away from maximum on the specs

Desapointing
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
lo estoy usando en un f3a de 2x2 y anda barbaro ,tanto en potencia como consumo ,lo estoy usando con una helice apc 20/13 y un consumo de 78 A
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
hola ,yo lo tengo en un f3a de 2 x 2 ,y anda una barbaridad ,tanto en potencia como consumo lo uso con una helice apc 20 / 13 y tiene de consumo 78 A .
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Watch out for the inevitable loose magnet(s). The motor is POWERFUL. I used it in a 2m Kanata with 3D performance swinging a 20x8 prop@3685 watts, 12s and 78amps. Magnets went loose twice and sized up the motor with deadstick landings. I got rid of this motor for a Power160 and reduced performance but RELIABLE power
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Did about 20 flights without any problem on a tug with 10S-5000mAh and prop 19x10. Powerfull to pull 4.5m gliders. But now 1 magnet loose, but I cannot remove the magnet to putt glue under it. Any suggestions to remove that magnet. What glue to use : epoxy? silicone?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Can you tell me if this can handle a 18 pound ESM corsair ? I have a 200 4 stroke OS and thinking of going eletric
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi there

I use this big brushless outrunner motor in a 4,5 meter Sailplaine.The weight

is 5,5Kg.I powert it with 12 Lipos and a 17" folding prop and a sentilon HV

brushless controler.The folding prop has under full power 8400 rpm and takes

25A.High voltage and low ampere this is the way.This untit works very well

and the plain goes with 8 meter a second in to the scy.

Now i will buy another of this motor to power a 6 meter ASW27.

Other friends al
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The motor is a powerhouse on 12S using a 20X10E APC and Scentilon 100 amp ESC. I have noted no tendancy to screach. It has not gotten hot (110F max)

Using 12S 5000 mah supplied by either 3 X 4S or 4X3S 5000 Zippy 25C

Unfortunately it is having problems with retaining the magnets. I'm glueing the magnets back in as they pop free. Indications are there was not enough glue applied at the factory.

My motor is appx 1 yr old.

Buying a spare
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am running this motor in a towing plane with a 20x10 APC electric -> 67 Amps static with 10S Rhino 4900 20C, 18x10 APC el. gives 53A. No issues after 40 Flights - pulls strong like a rhinozeros :). A reliable and very well performing motor!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Con este motor y 12 lipos con una 20X8 mi hidro de 4 kilos va como un tiro.................................................................

Despega en dos metros y trepa vertical hasta..................................................................

verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
No File Name download now [315kb]

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.