Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Kingduino Uno R3 unterstützte Mikrocontroller - Atmel ATmega328

Kingduino Uno R3 unterstützte Mikrocontroller - Atmel ATmega328

Shipped From:
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

10,37 €
Status:
Auf Lager
SKU:
381000030
WANT FREE SHIPPING? Click here to find out more!

Das Arduino Uno ist ein Mikrocontroller-Board auf dem ATmega328 basiert. Es verfügt über 14 digitale Ein- / Ausgangs-Pins, 6 analoge Eingänge, einen 16-MHz-Quarzoszillator, einen USB-Anschluss, ein Netzanschluss, ein ICSP-Header und eine Reset-Taste (davon 6 als PWM-Ausgänge verwendet werden). Es enthält alles, was benötigt, um den Mikrocontroller zu unterstützen; schließen Sie es einfach an einen Computer mit einem USB-Kabel oder schalten Sie es mit einem AC-DC-Adapter oder Batterie zu beginnen.

Die Uno unterscheidet sich von allen vorhergehenden Boards, dass es verwendet nicht den FTDI USB-Seriell-Treiber-Chip. Stattdessen bietet es die ATMega16U2 (Atmega8U2 bis Version R2) programmiert als USB-Seriell-Konverter.

Revision 2 des Uno Board hat einen Widerstand , um die 8U2 HWB Linie zu Boden ziehen, wodurch es einfacher, in den DFU - Modus zu schalten.

Revision 3 des Vorstandes hat die folgenden neuen Funktionen:
1.0 Pinout: hinzugefügt SDA und SCL Pins, die in der Nähe des AREF-Pin und zwei andere neue Pins in der Nähe des Reset-Pin gespeichert werden und die IOREF, mit denen die Schilde auf die Spannung, die von der Platine anzupassen. In Zukunft werden Schilde kompatibel sowohl mit den Brettern, die die AVR verwenden, (die bei 5 V arbeitet) und mit dem Arduino Due, die bei 3,3 V betrieben werden. Das zweite ist ein nicht angeschlossen Stift, die für zukünftige Zwecke reserviert.


* Hinweis:
Dies ist kein Original - Markenprodukt Arduino, ist es mit den gleichen Komponenten und Funktionalität , die von einem anderen Hersteller gefertigt.


Specs:
Mikrocontroller: ATmega328
Betriebsspannung: 5V
Eingangsspannung (empfohlen): 7-12V
Eingangsspannung (Grenzwerte): 6-20V
Digital - I / O - Pins: 14 (davon 6 PWM - Ausgang zur Verfügung stellen)
Analog Input Pins: 6
DC - Strom pro I / O - Pin: 40 mA
DC Strom für 3.3V Pin: 50 mA
Speicher Flash: 32 KB (ATmega328) , von denen 0,5 KB von Bootloader verwendet
SRAM: 2 KB (ATmega328)
EEPROM: 1 KB (ATmega328)
Taktfrequenz: 16 MHz

Eingeschlossen sind:
1 x Arduino Uno R3 Mikrocontroller-Board
1 x USB-Kabel

  • Artikelbezeichnung 381000030
  • Brand Kingduino
  • Kapazität ( mAh) -
  • Gewicht 75.0000
  • Länge 150.00
  • Packaging Width 25.00
  • Höhe 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well not much to say about this board it is Fantastic had just a bit of trouble to get it to run at first but that was do to me needing to up-date the IDE for Arduino I have the Nano, Mega and they are just as awesome I since have read a bit about how to tell a clone from the original the first two boards if you looked close at a Ardunio then at the clone you could spot a few different mainly the values that are used in the component's (16v Adruino clone has 25v ele caps)BUT this board looking at a original and then the clone I CAN NOT spot one different between the two!! Totally blown away ALL the same component's printing silk screen same part numbers If I didn't know better I would say the messed up and sent a ORIGINAL !!! lol Very Pleased to say the least works just as good a original! to bad they are all gone again GREAT JOB HK !!!!

Excelente calidad en la fabricacion lo recomiendo ampliamente

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excelente calidad en la fabricacion lo recomiendo ampliamente

not the orginal Arduino but bootloader is preinstalled and all works fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

not the orginal Arduino but bootloader is preinstalled and all works fine.

Arduino... novos desafios, vamos l!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arduino... novos desafios, vamos l!

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality, tried some programs and works really fine, with good response time to load sketchs. Sensor shields v5 fits fine.

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

works great, just like the genuine version.
the PCB, soldering and the overal build quality are good also

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I just received 4 of these arduino boards from Hobby King. The 3.3V output on all of them is a fail. It ranges from 1.7V to 3.2V. Not usable if you plan on using 3.3V as a reference or to power sensors.

Customer files
921137919X677897X37.jpg Download [16]
921137919X677897X43.png Download [2]
921137919X677897X59.png Download [11]
sensorshield Download [184]
arduandjoy Download [189]
sensorsheld Download [56]
sensorshieldpinouts Download [153]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save