-
Product
Description -
KINGKONG 2204-2300KV Multi Copter Motor CCW
Diese Motoren wurden für die KINGONG Bereich von Multi-Rotoren entwickelt, kann aber in jedem Multirotor verwendet werden. Sie geben hervorragende Schub von 440g und kann 2-4S (7.4-14.8V) LiPoly Batterien verwenden.
Specs:
KV (RPM / V): 2300KV
Spannung: 7.4-14.8V (2-4S LiPo)
Max Schub: 440g
Anzahl der Pole: 12N / 14P
Propeller: 5 "-6"
Kardanwelle: 5mm
Motorwelle: 3mm
Durchmesser: 28 mm
Länge: 31.2mm
Gewicht: 26 g
Bolt Lochabstand: 16mm oder 19mm M3Eingeschlossen sind:
1 x 2204-2300KV Motor CCW
1 x Prop-Adapter
5 x M5 Schrauben -
Product
Specifications -
Zusätzliche Information
-
Artikelnummer:
426000044-0
-
Brand:
Nicht zutreffend
-
Gewicht ( g)
49.00
-
Länge
61.00
-
Breite:
3.00
-
Höhe:
55.00
-
Kv (rpm / v)
Nein
-
Max Currents (A)
Nein
-
Leistung ( W):
Nein
-
Länge B (mm):
Nein
-
Kann Länge D (mm)
Nein
-
Max Spannung (V)
Nein
-
Welle A ( mm):
Nein
-
Unit Weight (g):
26
-
Durchmesser C (mm)
Nein
-
Gesamtlänge E ( mm)
Nein
-
Widerstand ( mh):
Nein
-
Artikelnummer:
-
Community
Discussions -
-
Rate&
Review -
Schreiben Sie Ihr eigenes Review
Only registered users can write reviews. Please, sign in or sign up
These work great! I used them in my homebuilt 250mm X8 project and I will definitely be getting more. If you are a hardcore racer then you'll be slightly disappointed BUT if you are a beginner or just a casual flyer, for the price these motors can't be beaten. Also they can handle a 4s battery very well. I've got around 20 flights all on 4s and haven't had a issue so far. I used 2 QAV 250 frames to build the X8.I just finished getting my second drone built and I chose 3 cw and 3ccw king kong 2204 motors! the ratings seemed good that I had read before I purchased them! But I have ran 10 packs through them and only 3s at that... and I have had one that the magnets started falling out, so I had to put in one of my backups already! And the other three the bearings are already toast! I should have stuck with the DYS 1806 I have had good luck with them!!Value is 0 if a product doesn't work.
I bought 6. Two had measurable differences between phases.
When they work they seem OK but I had some sync issues on one motor which would cause the quad to death spiral. Checked out the phases and resistance etc and this motor had gone south. Its not like I am going crazy with the quad and only on 4 cells. The wire wrapping and wire quality are highly suspect. (I took one apart and closely examined the windings).
You get what you pay for! Skip this and buy a $25 motor. Don't waste your money buying something and paying for shipping AND not flying for a week.
received in good condition and very good for beginner to intermediateSide by side, these look exactly like the EMAX 2204-2300. EXACTLY... I am running a set with the xwing 20amp speed controls on an armattan f-1-6 frame. I have another set up exactly the same with the armattan house 2204 motors and the kingkongs seem to have the same or maybe a bit more power. Bearings look decent and overall appears to be a good quality product.. Took a couple good full speed whacks into the trees with no bent shafts or damage. Great value and a solid product.Great little motor at a great price. Bought these for my FT Arrow and FT Mini F-22. Exact same specs as the Emax 2204 motor (same maker?) but at a better price. Love them.I would recommend this motor if your running on a budget its great power for the buck, but 1 out of 4 motors i got the barring got broken after a few flights "thats why 4/5" but for the price its great so cant complain you get what you pay for. -
Upload
Videos -
Upload
Files -
Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!
Customer filespercy download now [78.41Kb] percy download now [78.41Kb] percy download now [78.41Kb]