Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

KINGKONG 260 FPV Racing Drone Plug & Play (Grün)

Generating Links

KINGKONG 260 FPV Racing Drone Plug & Play (Grün)

Preis:

Now save speichern 0,00 € 0,00 €

144,59 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
426000029-0
Kostenloser Versand? Klicke hier um mehr zu lernen!

Die KINGKONG Team haben es wieder getan. ein großes Paket von Equipment eine hervorragende Plug-and-Play machen Paket komplett mit FPV Kamera und Video TX Mit ihrer beliebten 260 FPV Rahmen sie hinzugefügt haben.

Diese Acromodelle wird durch die Kraft 200 KINGKONG Acromodelle Fahrgerätesatz mit Strom versorgt. Das Kit hat alles, was man von einem bereits abgestimmt Mini CC3D Flugregler müssen bis auf die Spironet Antenne.

Die Motoren sind KINGKONG 2204-2300KV (CW und CCW) angetrieben durch KINGKONG 12A OPTO BLHeli WSA. Mit einem UBEC (5 V 3A) die Stromversorgung des HVE. 6040 Propellers wird Ihr Tempo beschleunigen.

Es ist ein vorinstalliertes FPV Kamera und Video-TX so einfach einstellen Kanal und bekommen fliegen. Die FPV Kamera ist abgewinkelt, so dass Sie sehen, wohin du gehst, wenn das Rennen ist.

Nur um sicherzustellen, dass Ihre Konkurrenten wissen, wo Sie sind, gibt es superhellen LED-Streifen auf der Rückseite, da dies der einzige Teil sein wird, sie sehen werden.

Diese spannende Verpackung sieht nicht nur der Teil, aber Sie werden Stunden Renn Genuss zum richtigen Preis geben.

Eigenschaften:
• Vollständig geformte Unibody glasfaserverstärkte Gehäuse
• KINGKONG 2204-2300KV Motors (CW und CCW)
• KINGKONG 12A 2-4S OPTO BLHeli WSA
• KINGKONG 5V-3A UBEC
• Leistung und Videoverteilung mit XT60
• Mini CC3D Flight-Controller
• 5040 Propellern (CW und CCW)
• FPV Kamera 1000TVL CMOS
• 200mW 5,8GHz Audio / Video Sender
• 5,8GHz zirkular polarisierte Antenne Spironet
• Aktion Kamerahalterung
• Super helle LED-Modul (Stellen Sie sicher, Ihre Konkurrenz weiß, dass Sie es übernehmen diese!)

Rahmengeometrie:
Radstand: 260 mm
Gewicht: 138g (bare Rahmen)
Material: Nylon + Fiber

Motor Specs:
KV (RPM / V): 2300KV
Spannung: 7.4-14.8V (2-4S LiPo)
Max Schub: 440g
Anzahl der Pole: 12N / 14P
Propeller: 5 "-6"
Kardanwelle: 5mm
Motorwelle: 3mm
Durchmesser: 28 mm
Länge: 31.2mm
Gewicht: 26 g
Bolt Lochabstand: 16mm oder 19mm M3

ESC Specs:
Eingangsspannung: 7.4-14.8V (2-4S LiPo)
Konstante: 12 Ampere
Burst: 20 Ampere (5s max.)
BEC: Nein BEC, OPTO nur
Abmessungen: 50x16x6mm
Gewicht: 7,5 g (mit Kabel)

UBEC Specs:
Eingangsspannung: 6 V ~ 28 V / DC (2-4S LiPo)
Ausgangsspannung: 5V
Ripple: Konstante: 3 Ampere
Abmessungen: 53x17x7mm
Gewicht: 12g

Kamera Specs:
Format: PAL
TVL: 1000
Sensor: CMOS
Eingangsspannung: 5 ~ 12V DC
Betrachtungswinkel: 120deg

Video TX Specs:
Moduliere: Breitband- FM Modulate
Videoformat: NTSC / PAL
Ausgangsimpedanz: 50 Ohm
Ausgangsleistung: 23 ~ 24dBm
Kanal: 32CH
Betriebsspannung: 7 V ~ 24V
Versorgungsstrom: 190mA
Betriebstemperatur: -10 ~ 85
Video - Band - Breite: 0 ~ 8,0 MHz
Audio Trägerfrequenz: 6,5 MHz
Video Eingangspegel: 0,8 ~ 1,2 V pp
Video Eingangsimpedanz: 75 Ohm
Audio - Eingangspegel: 0,5 ~ 2,0 Vp-p
Audio Eingangsimpedanz: 10K Ohm
Anschluss: RP-SMA
Maße: 40 x 23 x 8 mm
Gewicht: 10g (ohne Antenne)

Kanäle:
Band A: 5865, 5845, 5825, 5805, 5785, 5765, 5745, 5725
Band B: 5733, 5752, 5771, 5790, 5809, 5828, 5847, 5866
Band E: 5705, 5685, 5665, 5645, 5885, 5905, 5925, 5945
Band F: 5740, 5760, 5780, 5800, 5820, 5840, 5860, 5880

Eingeschlossen sind:
1 x 260 KINGKONG
20 x 6040 Pro (10CW + 10CCW)
1 x Spironet Antenne
1 x ESC PC-Software Kommunikationsadapter
1 x Action Cam gedämpft montieren
1 x-Kabel-Pack
1 x Kabelbinder Packung
1 x Antennenhalterung Set
1 x USB-Kabel

Erforderlich:
5-6 Kanal RX / TX
1300-2200mah 11.1V; 1000-1800mah 14.8V

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Greg | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great bang for your buck

Oct 26, 2017

I got this Quad after I lost my KK Hex version when being stupid. I find this quad is nimble enough and good for learning on. Pretty quick too. I had heavy batteries so I could get long flight time and will soon try some lighter 4S batts and I'm expecting good things in terms of a speed increase. I love the librepilot/CC3D FC, and overall it is well balanced.
The frame however is brittle, and the main let down of this product. I slow bump will snap an arm so get your superglue and epoxy ready. I've got to the point of using fibreglass repairs over the superglued break point. Also the feet fall off, a design fail indeed. I had to make my own landing pads.
But for the price, it's a great start quad and certainly a bucket load of fun. Just try not to crash it too hard.

PlanetFPV | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great package for those testing the sport

Jul 28, 2017

Very easy set up that took a total of 45 mins including flashing the cc3d through librepilot. The set up as is handles like a bus so I would recommend changing it for racing. My value rating is based on the summer sale price and at the current price I would give this a 4 star.

Russ | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Great quad for intro into FPV racing!!!

May 30, 2017

Bought this to get used to flying the faster FPV type quads. It performed great right out of the box. Did have to go online to get some direction on how to program and get current firmware. Overall this is a great little 260 quad!!!! Very happy!

jambon | Verifizierter Käufer

  • Overall
  • Quality
  • Value

It's ok, but a few design mistakes

Nov 02, 2016

It's a very nice quad in overall, maybe for beginners ?
But, the landing thing/feet keep falling apart, and inevitably you loose them.
Once you lost enough foots, then you land on the ESC, because some sort of genius thought it was a good to install the ESC under the frame.
The ESC do not like to be used as landing pads, so they break.
Broken ESC burn motors (literally).
Replacing ESC on this frame is super annoying cause you have to unsolder ALL OF THEM
I'm not super happy about this.

Maxwell | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Oct 26, 2016

Great little quad for a beginner multirotor pilot. This was my first quadcopter and it defenitely facilitated a great introduction to multirotor flight as well as some great fun once I became more confident.

My only major criticism is the frame. It's quite brittle and once an arm is gone it is a pain to re-attach. I will shortly be migrating this hardware to a new body.

rudedog | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 08, 2016

i bought 2 of these and i cant get enough of it it flies great

eldiablo155 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jul 25, 2016

She came just few days ago, cc3d controller is really easy to setup , I checked if the ESCs were all linked as they should and I went for a fly ... I like the feeling she gives, I like the sound of her engine ... I like the green lime LEDs on the back , she can be really faster , all I need now is learn how became good for her , using the right power while turning ... it'll take his time , but since she made me confident with the whole space around me , I'll be keen to do it. I'm feeling in love

Proff | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 10, 2016

Awesome kit for racing.

lampo.ep | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 08, 2016

precio y calidad deseable

Joel | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2016

upon receiving this item everything was looking great. I downloaded the CC3D ground station program on my laptop. The setup wizard has easy to follow directions and once done I set my default parameters and how I wanted to arm it and BAM the thing flies like a dream! I've flown it with a bunch of different batteries, below will be the battery type and how well it did. BTW the winds were really heavy and choppy today so it was fighting a hefty wind. and still performed great enough to pull off a lazy back flip.
FYI there is no low voltage warning the speed controllers will just execute the low voltage cut off.. I highly recommend timing your flight times with low altitude maneuvers until you know how long each battery lasts so you will avoid a crash!

3s 2200mah 40c- lots of power- battery was warm but not hot- 11min flight time
3s 2200mah 25c- decent power- battery was hott after flight- 6 min flight time
3s 1000mah 30c- decent power- battery was warm but not hot- 5min flight time
2s 5000mah 25c- gutless! full throttle it barely climbed (this battery was from my stadium truck)

so in reflection stay with a 3s lipo with at least a 30c rating. I cant wait to try a 4s lipo in this quick and nimble thing! ive been told these 250 class quads like between a 1300mah and 1600 mah battery with a high "c" rating

Kundendateien
Manual Download [2]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!