Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

La Belle Dame Radio Controlled Flugzeug EPO 1180mm (PNF)

La Belle Dame Radio Controlled Flugzeug EPO 1180mm (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9041000082
WANT FREE SHIPPING? Click here to find out more!

Das La Belle Dame ist wirklich eine "schöne Dame" mit seinem lebhaften, bunten Farbgebung und klare Linien. Nicht nur, dass sie schön aussehen, sind die Flugeigenschaften eine Sache der Schönheit als auch. Mit seiner polyedrischen Flügeldesign und große Flügelfläche, ist die La Belle Dame sehr nachsichtig und leicht zu fliegen. Dies macht es ein großes Vorbild für Anfänger und erfahrene Piloten gleichermaßen.

Einfache Montage ist der Name des Spiels mit der La Belle Dame. Die Flügel- und Schwanzabschnitte sind Bolt-on, dieses Modell macht nicht nur einfach zu montieren, sondern ermöglicht es Ihnen, schnell für Transport / Lagerung zu zerlegen. Kein Kleben erforderlich, um dieses Modell zu bauen. Das bedeutet, dass Sie die La Belle Dame in der Luft in weniger als 15 Minuten haben kann!

Das La Belle Dame ist ein Plug-and-Modell fliegen, was bedeutet, werden Sie einfach Ihre eigenen 2S 7,4V 1300mAh Lithium-Polymer-Akku hinzufügen müssen, einen 3 ~ 4-Kanal Sender und Empfänger.

Specs:
Spannweite: 1180mm
Länge: 916mm
Flügelfläche: 19.5dm2
Flächenbelastung: 21,5 g / dm 2
Servo: 9g x 2
ESC: 10A Brushless
Motor: 2408-21 80W Brushless Outrunner
Gewicht: 420 g

Eingeschlossen sind:
La Belle Dame PNF Flugzeug
Ersatzpropeller
Ersatzgabel
Schraubendreher
Prop Schlüssel

Benötigt:
2S 7.4V Lithium-Polymer-Batterie
3 ~ 4-Kanal (Minimum 3CH) Sender und Empfänger

* Hinweis: Der ESC bei diesem Modell eine JST - Stecker verwendet, so dass Sie ein Batterieadapter verwenden müssen , um Ihre Batteriestecker zu JST umwandeln , wenn sie stecken vorinstalliert kein JST haben.

  • Artikelbezeichnung 9041000082
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 2558.0000
  • Länge 935.00
  • Packaging Width 190.00
  • Höhe 335.00
  • La Belle Dame
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Fantastic plane. Landing gear is a bit weak, and yes the tail plane needed leveling upon arrival but once set up it is an absolute dream to fly. My 9yr old son, this is his first plane that I am teaching him to fly on. 3rd flight he was doing circurts for 10minutes plus at a time. 5th flight he was taking off and landing. I even enjoy the easy of getting on the sticks of this plane!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic plane. Landing gear is a bit weak, and yes the tail plane needed leveling upon arrival but once set up it is an absolute dream to fly. My 9yr old son, this is his first plane that I am teaching him to fly on. 3rd flight he was doing circurts for 10minutes plus at a time. 5th flight he was taking off and landing. I even enjoy the easy of getting on the sticks of this plane!

The stars tell the true horribly put together maybe that's why the going cheep but worth 40

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The stars tell the true horribly put together maybe that's why the going cheep but worth 40

a horrible assembled kit tock me more than 4 hour's to fix

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a horrible assembled kit tock me more than 4 hour's to fix

hi there, I bought this plane a while back as my first large plane, I have only flown mircos before, bought it purely on looks and being a slowflyer and I have to say I love this plane. It went together easily,fitting the battery and rx took some working out, But she flys really well under power or gliding across the local dunes.
Thanks to hobbyking for a lovely starter plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

hi there, I bought this plane a while back as my first large plane, I have only flown mircos before, bought it purely on looks and being a slowflyer and I have to say I love this plane. It went together easily,fitting the battery and rx took some working out, But she flys really well under power or gliding across the local dunes.
Thanks to hobbyking for a lovely starter plane

Received this plane in good time and good condition.
Construction is a breeze and quality is good with no complain at this price.it looks beautiful both on the ground and in the air. Maiden flight is delightful with both on wheel and hand launch, it floods almost by itself and despite no aileron control but with only rudder and elevator are easy and responsive. Highly recommended to beginner (like me), i hope you can have lot of joy of air time like me. Please feel free to ask any question you might have and i'll share as much as i can.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received this plane in good time and good condition.
Construction is a breeze and quality is good with no complain at this price.it looks beautiful both on the ground and in the air. Maiden flight is delightful with both on wheel and hand launch, it floods almost by itself and despite no aileron control but with only rudder and elevator are easy and responsive. Highly recommended to beginner (like me), i hope you can have lot of joy of air time like me. Please feel free to ask any question you might have and i'll share as much as i can.

Very very nice model out of the box, decals a bit bubbly, blue paint around the canopy prone to rubbing off (minor issues). Very tight inside the cockpit, had to remove the turnigy 7ch rx ( I had a spare 1) casing to squeeze it under the central carbon (fibre?) shaft. A smaller rx with end pins would be a better option. 950mAh 2s nanotech fits perfect with rx below the shaft. My elevator/rudder mount is perfectly aligned with the wings so either I got lucky or the mis-alignment issue has been fixed. Yet to maiden (crash) it yet but will report back when I manage to get the opportunity

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very very nice model out of the box, decals a bit bubbly, blue paint around the canopy prone to rubbing off (minor issues). Very tight inside the cockpit, had to remove the turnigy 7ch rx ( I had a spare 1) casing to squeeze it under the central carbon (fibre?) shaft. A smaller rx with end pins would be a better option. 950mAh 2s nanotech fits perfect with rx below the shaft. My elevator/rudder mount is perfectly aligned with the wings so either I got lucky or the mis-alignment issue has been fixed. Yet to maiden (crash) it yet but will report back when I manage to get the opportunity

Got my Belle yesterday; it sounds lame, but the packaging was excellent, probably the most thorough job I've seen. Still, one wing tip was slightly damaged, probably during packing. Assembly was very easy but there were some issues; the tail assembly was tilted to the right by several degrees; this seems to be a very common problem and HK needs to take care of it. For small deviations like I found on mine, it doesn't affect handling, but it spoils the looks of the model. Not good advertising! Also, the LG legs only go in one way...but the instructions are vague about which way is which. That took a little time to work out. Flying the maiden this morning, I discovered a bad vibration in the motor at high power settings...found it was probably due to the prop not being firmly seated on the hex shaft on the motor. Fixed that and now the motor runs beautifully. Even with a noisy motor, the first flight was very nice. The plane is really beautiful in the air and it is extremely stable, turns well, and glides so nicely that I am seriously thinking about putting a folding prop on it. If HK fixes these small issues, they will have a great airplane; as it is, it's a very good one!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got my Belle yesterday; it sounds lame, but the packaging was excellent, probably the most thorough job I've seen. Still, one wing tip was slightly damaged, probably during packing. Assembly was very easy but there were some issues; the tail assembly was tilted to the right by several degrees; this seems to be a very common problem and HK needs to take care of it. For small deviations like I found on mine, it doesn't affect handling, but it spoils the looks of the model. Not good advertising! Also, the LG legs only go in one way...but the instructions are vague about which way is which. That took a little time to work out. Flying the maiden this morning, I discovered a bad vibration in the motor at high power settings...found it was probably due to the prop not being firmly seated on the hex shaft on the motor. Fixed that and now the motor runs beautifully. Even with a noisy motor, the first flight was very nice. The plane is really beautiful in the air and it is extremely stable, turns well, and glides so nicely that I am seriously thinking about putting a folding prop on it. If HK fixes these small issues, they will have a great airplane; as it is, it's a very good one!

Flies very nice. Very gentle on the controls

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Flies very nice. Very gentle on the controls

As another reviewer pointed out about the motor being bad, I had the same thing happen to me. I had problems with the engine running smoothly. I flew it today and I knew immediately something was wrong and as I was landing I could see the motor hanging down I knew I had a problem. The bearing had gone bad causing stress on the engine mount and the mount screws were torn out of the mount. I could see them sticking to the back of the motor. Whether to rebuild and fly again or write it off and get a different plane is the question. AlsoI think that the landing gear mounting system is terrible.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As another reviewer pointed out about the motor being bad, I had the same thing happen to me. I had problems with the engine running smoothly. I flew it today and I knew immediately something was wrong and as I was landing I could see the motor hanging down I knew I had a problem. The bearing had gone bad causing stress on the engine mount and the mount screws were torn out of the mount. I could see them sticking to the back of the motor. Whether to rebuild and fly again or write it off and get a different plane is the question. AlsoI think that the landing gear mounting system is terrible.

Two issues.

1) Tail heavy with a 2S 1300 battery barely fitting in there.

2) No visible way to change props. The included wrench isn't big enough to grasp the nut on the prop shaft.

Any help?
Thanks.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two issues.

1) Tail heavy with a 2S 1300 battery barely fitting in there.

2) No visible way to change props. The included wrench isn't big enough to grasp the nut on the prop shaft.

Any help?
Thanks.

  1. 1
  2. 2
Customer files
Manual - La Belle Dame 1180mm Download [4803]
Flight of the Phoenix Download [1997]
Flight of the Phoenix Download [1997]
No File Name Download [4803]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save