Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global

Laser230 FPV Quadcopter Composite-Kit (230mm)

Laser230 FPV Quadcopter Composite-Kit (230mm)

QTY:

Now save Speichern 6,78 € 6,78 €

Special Price 12,70 € 12,70 €

You save Speichern 6,78 € 6,78 €

Was  19,48 €

Stock:
Gewicht:
247 g
SKU:
366000017-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Combine

essential items and
esc
battery
motor
acc
Product
Description

Die Laser230 ist ein All-Verbundkonstruktion 230mm baumumarmen Rennen FPV quadcopter. Die Laser230 hat, was eine saubere und unsaubere System genannt wird, die Vibrationen Fingerhüte verwendet den Motor zu isolieren und Vibration vom FC und Kamera stützen. Die Clean-and-Dirty-System können Sie straffer PID laufen und haben eine Gello kostenlose Video-FPV-Sitzung.

Die Arme Unterstützung Motor von 16x19mm und 12mm Abstand Montage. Die max prop Größe ist 5inch und perfekt für die 1704 ~ 2206-Klasse-Motoren. Die robuste Verbundkonstruktion kommt mit vielen Einrichtungen für die Montage und Riemen, eine Schnapp machen installieren. Der Rahmen verfügt über 8 Vibrations Fingerhüte zur Isolierung sowie eine neue zukunftsweisende FPV Kamera zwischen den Rahmen montieren. Die Laser230 hat einige schlanke Optik mit heißen roten eloxierten Aluminiumabstandhaltern und einem kühlen matte Oberfläche, so dass dies ein großartiges kleines Quad lokalen Flugplatz zip herum.

Eigenschaften:
• Composite-Konstruktion
• Große Auswahl an Motor und Leistungsoptionen
• Große sekundäre Schwingungsisolationsrahmen für mehr Raum und einfacher Layout
• Kompakte Größe für die Nähe von Hindernissen fliegen

Specs:
Radstand: 230 mm
Gewicht: 180g
Höhe: 82 mm mit ausgefahrenem Fahrwerk und Mitte Käfig

Erforderlich:
4 x Motors 1506 ~ 2208
1 x Batterie 800 ~ 1300mAh 7.4 ~ 11.1V (2 oder 3 Zellen Lipo)
4 x Propellers bis 5in
4 x WSA 7 ~ 12A
1 x Multi-Rotor Flight Controller
4-Kanal-Radio (6-Kanal empfohlen für FPV und FC Verwendung)
FPV Getriebe (optional)

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    366000017-0
  • Brand:
    Nicht zutreffend
  • Gewicht ( g)
    247.00
  • Länge
    210.00
  • Breite:
    30.00
  • Höhe:
    100.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
good frame for the price. flies well but a bit heavy (180g)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Frame seems sturdy for composite structure and leaves some room for modification. However 5" propose are very tight fits, don't think you can put 6" somehow on this thing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not a bad frame at all, great price too. There is no instructions but, it is really straightforward. I am concerned about the arm mounts at it is only 2 screws holding it, may break the arm in a crash. I have not seen any replacement parts for this one anywhere.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent frame. No complaints at all. Highly recommended.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Okay, This frame is cheap and looks good. But out of 2 sets of motors only one fits. spacing on mounts fit multistars but not emax. 1806 motors cant Clear the bottom plate of the frame while on flight. i would not get this again i enjoy my fov250 and Qav 250 more.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good value and quality is nice however the clean/dirty design is a fatal weakness. Any minor crash results in separation of the two parts which will likely snap a few of the ESC wires too.

Nice idea but I'm going to replace the frame with a carbon mini-blackout clone.

As a side note mine weighed in at 550g with 3S2200mah and FPV gear (but no gopro/mobius). Feels a bit slugish with 1806-2300kv.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
high quality, nice design.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ok bought this to just have something better than the FPV250 sold here with the one solid frame for like 9 bucks. It's a nice frame clean all the bolt holes lines up and lots of hardware to. It is a little heavy but then it's a 4 plate frame, I was able to place my 12amp escs between the botom 2 plates for a nice clean look . The arms are a little weak but not broke them just can bend them some but its a good looking and feels as good as some of my more expensive frames . The rubber grommets holding the bottom fraam to top half are a little soft and loose so make sure use small zip ties to keep it from popping apart on crash or in flight. I placed a CC3d flight board on mine with Sunnysky 2204-16 2300kv motors and 12amp escs 5030 tri props and std props with a Mobus cam and 700tvl fpv camera and 250watt Bosscam transmitter and 1500 25/50c batt total weight loaded is 630 grams. flies 7 minutes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've bought a Laser230 and I disappointed with it. 5X3 propellers can't fit of this frame the arms are shorter than normal. I made new arms for this but now it looks like a mule. I'm looking for a proper 250 size frame somewhere.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The kit is OK and despite the arms being of the same, fairly thin material as the rest, my quad with "Baby Beast" motors and HK carbon 5030 props survived a pretty impressive scratch with no damage at all. The vibration dampening design is a joke though. Make the frame rigid by using nylon bolts & spacers through the 8 bolt holes next to the dampening balls instead or you get crazy shakes. Dampening is only needed for a small camera platform. For the money, it is great choice though.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • FPV250 Low Hung

  • Added heli landing gear to offer the battery some protection.

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Customer files
laser230 pdb download now [1597kb]
Laser230 RTF download now [1283kb]

Combine

essential items and
esc
battery
motor
acc

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.