Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

LD Sturms Auge Brushless Gimbal Full Carbon-Kit (DSLR)

LD Sturms Auge Brushless Gimbal Full Carbon-Kit (DSLR)

Discontinued Product

Please continue searching for a similar product.
SKU:
450000109-0
WANT FREE SHIPPING? Click here to find out more!

Der neue Sturms Auge LD ist ein leichter Vollcarbon-Composite-Brushless-Gimbal für volle Größe DSLR-Kameras montieren. Die Sturmauge-Carbon-Rohr und Klemmenkonstruktion sorgen für eine breite Palette an Einstellbarkeit richtigen Kamera-Balance zu erreichen. Das Kit kommt mit Kugellager unterstützt, eloxiertes Aluminium CNC-Komponenten, eine vollständige Hardware und die Vibration mit Feucht Kugeln montieren. Die LD ist für größere DLSR Kameras mit einer erhöhten Anzahl von Schwingungsdämpfungs Kugeln über die 5N-Version entworfen, aber aufgrund seiner breiten Einstellbarkeit kann durch eine Verringerung der Anzahl von Kugelisolatoren installiert mit anderen kleineren Kameras verwendet werden.

Specs:
Material: Carbon 3k, CNC - T6 Aluminium
Gewicht: 277g
Größe: 190x190x150mm (einstellbar)
Empfohlene Gimbal - Motoren: 40-80mm Rahmen (nicht im Lieferumfang enthalten)

* Hinweis: Dies ist ein Kit und beinhaltet nicht die Kardan - Motoren oder BGC - Controller.

  • Artikelbezeichnung 450000109-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 415.0000
  • Länge 280.00
  • Breite 45.00
  • Höhe 145.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

A cheap place to start for DSLR work. I have fitted two BGM5012 150Ts on a BGC, and it handles my Canon 550D with the standard zoom lens OK. Sure, it's cheap (so thin - and light!) so you have to be careful: careful when you tighten things, careful when you land - although the horizontal arm clamps slipping on a bouncy land is preferable to snapping, perhaps. I've now adapted it to 3-axis and it works fine. You can't buy that many tube clamps for the money, so I'd say, for a hobbyist rather than a pro, this is a fine place to start.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A cheap place to start for DSLR work. I have fitted two BGM5012 150Ts on a BGC, and it handles my Canon 550D with the standard zoom lens OK. Sure, it's cheap (so thin - and light!) so you have to be careful: careful when you tighten things, careful when you land - although the horizontal arm clamps slipping on a bouncy land is preferable to snapping, perhaps. I've now adapted it to 3-axis and it works fine. You can't buy that many tube clamps for the money, so I'd say, for a hobbyist rather than a pro, this is a fine place to start.

Yep, straight out of the box the bearing is by far the worst new bearing I have ever come across. There is dirt in crevices like it has been floating around the shop floor and has obviously been damaged in the press as it has a classic tight notchy feeling. Luckily I bought it overspec'ed for a Gopro for now, so should be OK for the moment. I was expecting a bad bearing, so, off to the bearing shop ....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Yep, straight out of the box the bearing is by far the worst new bearing I have ever come across. There is dirt in crevices like it has been floating around the shop floor and has obviously been damaged in the press as it has a classic tight notchy feeling. Luckily I bought it overspec'ed for a Gopro for now, so should be OK for the moment. I was expecting a bad bearing, so, off to the bearing shop ....

The design of this product is pretty good, however the manufacturer shoots himself in the foot by using poor quality screws and aluminium for the fittings. 20 pcnt of the screws stripped (or the fitting failed). Nice try, but not worth the 100 bucks. Sadly.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The design of this product is pretty good, however the manufacturer shoots himself in the foot by using poor quality screws and aluminium for the fittings. 20 pcnt of the screws stripped (or the fitting failed). Nice try, but not worth the 100 bucks. Sadly.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!