Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Mig 15 35mm EDF Micro Jet EPO (ARF)

Mig 15 35mm EDF Micro Jet EPO (ARF)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
880 g
SKU:
M15-35-ARF

Combine

essential items and
esc
battery
servo
Product
Description

Dieser winzige Mig 15 ist erstaunlich, EPO-Schaum mit ihm kombiniert ist im Feder Statistik bedeutet es der Quote weniger als 100% der Landung sehr nachsichtig sein. Die 35-mm-Lüftereinheit ist im Preis inbegriffen und das Modell kommt in 1 Stück so alles, was Sie tun müssen, wenn es ankommt ist Ihr eigenes Servos & Regler passen, schließen Sie die Steuerstäbe und Hörner, an einen Reciever die RC-Ausrüstung anschließen, die Micro JST conectors verwendet und Sie sind bereit zu gehen ......

Stopp Drücken Sie ! Eine gute Nachricht, halten Sie Ausschau nach der neuen orange RX DMS2 kompatibel Mikro - Empfänger mit Micro JST Servo Stecker, die genau die richtige Größe für so fantastische Mikrostrahl sein wird sehr bald kommen .... Hobbyking

wo waren wir? Ach ja, Dogfighting mit dem neuen Micro F-86 Sabre in den Park, Basketballplatz, in der Tat ziemlich gut überall!

Die Box das Modell in ankommt ist wirklich praktisch, nicht nur dem Transport Aufhänger Ausschlag aber die Ersatz Taschen in der Verpackungsschaum sind ideal für den Transport Ersatz Lipo ist zu verhindern, und Sie werden so viel Spaß mit diesem haben, ich ein paar tragen würde! Diese Mig ist so süß, auch Ihre Frau es mögen!

Specs:
Spannweite: 390 mm
Länge: 390 mm
Fluggewicht: 95g
EDF: 35mm mit 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC (Erforderlich)
Servo: 3 x 2 g (Erforderlich)

Eigenschaften:
Optionale Zusatztanks
Magnetic Canopy & Fan Hatch
Vorinstallierte Ruderhörner

Eingeschlossen sind:
Anleitung
Kontrollstäbe

Benötigt:
4-Kanal-TX mit 4-Kanal-Micro RX (Micro JST-Stecker kompatibel)
7.4V 350mAh 2s Lipo Akku
3 x 2 g Servos
6A ESC

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    M15-35-ARF
  • Brand:
    Nein
  • Gewicht ( g)
    880.00
  • Länge
    525.00
  • Breite:
    150.00
  • Höhe:
    410.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Wow this model is great - flies on rails - I use a turnigy plush 10A ESC and 3S 350 & 500mAh Zippy Compact lipos and this thing howls- really good power and speed.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Despite of some ESC proplems and a windy and gusty surrounding (4 bf), I had the first flight today: I had a really nice fligt (you have to be quick at the controls!). It was easy to build, the CG in the manual is OK. (I had to put about 8g to the front). Stabilizer was a bit bent. I could correct it with some hot air.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I first bought the twin edf but like to assemble the stuff myself so got this one too. Fuselage is pre-assembled but wings have to be glued, edf too with electronics of own choise. Much better and great fun. Also see the RCG thread with ID 1452474.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just add a HK12A ESC a thrust tube a R415 receiver some HK282 servos a carbon wing spar some dremel work in the avionics bay, finally add a 3S460 Nano tech battery shake vigorously and you have a silver bullet.
Oh the factory CoG works too.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a nice Plane!!!

i use it in this configuration:

Servo: TGY-D1290P High Speed Micro Servo 0.35kg/0.07s/2.9g
Speed Controller: TURNIGY Plush 10amp 9gram Speed Controller
LiPo: Turnigy nano-tech 460mah 3S 25~40C Lipo Pack

So its a little Rocket :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Aereomodello molto ben fatto che conviene montare con i servi da 2.5gr

per una maggiore precisione.

Purtroppo ho comprato per questo modello"come da istruzioni" le batterie da 2s

con le quali vola molto male con poca potenza "per questo 4 crowns".

Ho risolto il problema mettendoci le rhino 3s 360 che pero' entrano molto

male nel modello.

Ho dovuto per il bilanciamento aggiungere oltre alla batteria piu' pesante

10 gr sul davanti.

Con questa configurazione e' eccezionale, vola in un modo meraviglioso!

ps: speriamo che il motore non si bruci.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I've tested the mig with 2s 350mha nanotech, not enough thrust and after 3min of flight (3,9v each cell) I have difficult to stay in air at full throttle :|
Otherwise it's very easy plane to fly in no wind condition.
This is my first plane and, after a couple of hours with FMS, I had no problem to do my first fly with it (I have not flown any plane before), very funny.
Some problems with CG in the begin but easily correct and after all ok.
I've crashed it only in windy (15-20km/h) condition.
The canopy came out easily during accidents so, if you don't want to lose it, it's better to use a rubber band to hold it in place.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The kit arrived very well packed-no damage, well done HK. I am waiting for the Rx that HK is promising, hoping not too long.

The 2g. servos recomended fit the openings well and seem to have the same plugs as the Futaba micro rx, but this rx is too big for the model.

The servo leads are too short, need to be about 25-50 mm longer to reach the rx from the wings. HK should fix this!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Model is definately for advance modelers. One should be able to solder precisely and be very accurate.



Setup:

3S 450 mAh Nano LiPo

10A Turnigy Plus ESC

2.5 g servos HC

4ch Frsky rx

0.8mm connectors from HC



RTF: 112 g

CG: Where aileron servowires enter the fuselage.



Mods:

Added 2 mm triangle balsa on all the trailing edges

Repaired elevator hinge with UHU Por glue

Used ultra thin servo wires from HC (black and red)



My EDF was running very smooth on 3S, so no balancing was needed.



I throw underhand with 3/4 throttle, no problems at all if you have flown EDFs previously. Recommended!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
cont......

first toss. It stalled on me and went in (video coming soon). A nice firm dart like push straight out is the best method for this and will see the model take to the skies immediately. I was impressed with the way it flew and only needed a minor trim. The best way to describe it is "a pocket rocket"! Remember, this is not a big jet. It is tiny. Fast for this might be considered slow to some who have high power larger jets. I could keep up with a 50mm Hawk that was flying at the time for a speed reference.

Conclusion:
Skyangel models have done well and I commend them for introducing a cheap micro jet to the market. It's a fun model, you get what you pay for and it can handle a nose in without breaking. What more could you ask for? :-)
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • 35mm EDF MiG 15

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Combine

essential items and
esc
battery
servo

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.