Registrieren

Product Finder

Einstellungen

Useful links

Live-Chat
 
[["US","AU","GB","DE"]]
Registrieren

Mini 3D-Ultimate (KitplusMotor)

Mini 3D-Ultimate (KitplusMotor)

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Gewicht:
795 g
SKU:
3D-Ultimate

Combine

essential items and
esc
battery
servo
Product
Description

Diese Mini-3D-Ultimate für Innen- und Außen Fliegen geeignet. Erbaut aus Licht EPO Schaumfolie ist das ultimative stark genug, um gelegentliche Stöße aushalten es das perfekte Modell zu machen Ihre 3D-Fähigkeiten zu üben und zu perfektionieren. Wir haben dieses Modell auf Herz und Nieren zu einem großen Flugplatz mit einer milden Brise und es war eine Explosion zu fliegen! zu diesem Preis 3D Shockflyer erhalten nicht besser!

Ein bürstenloser Läufer-Motor und Propeller wurden mit diesem Kit enthalten. Alles, was Sie dieses Modell zu vervollständigen benötigen drei 2.5gram Servos, eine 10 Ampere Brushless Regler, ein 800mAh 2S 7.4V Lipo Akku und Ihren eigenen Sender und Empfänger (Tx / Rx).

Specs.
Spannweite: 624mm
Länge: 620mm
Fliegen Gewicht: 200g
Motor: C20 2050kv Brushless Outrunner ( im Lieferumfang enthalten)
Prop: 7 x 3.5 ( im Lieferumfang enthalten)
ESC: 10A
Batterie: 7.4V 2S 800mAh Lipo (Erforderlich)
Servos: 3 x 2,5 g (Erforderlich)
Radio: 4 - Kanal (Erforderlich)

Erforderlich.
7.4V 2S 800mAh Lipo
10A ESC
3 x 2.5gram Servos
4-Kanal-Transmitter & Receiver

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    3D-Ultimate
  • Brand:
    Nicht zutreffend
  • Kapazität ( mAh)
    Nein
  • Gewicht ( g)
    795.00
  • Länge:
    650.00
  • Breite:
    50.00
  • Höhe
    180.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
The Ultimate won't stand up to any breeze with a 2S battery. It will fly into an 8 mph wind with the stock motor and a 3S battery. I put a bigger motor on it but I haven't tried it yet. It glides like a brick if you cut the throttle. The stock servos are very good, plenty of torque and range of movement. I glued a carbon rod on the bottom of the fuselage to make a landing skid to protect the aileron servo during landings. I figured that out real quick after the first servo got trashed. A light crash will break the center wing strut, add some reinforcement on the sides. For a so-so pilot it's not too difficult to fly.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
amusant petit avion un peu lourd pour l'indoor chez moi mais en exterieur avion tres vif et agreable d'ailleur j'en ais acheter un 2eme pour voler avec mon fils
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a fun machine It is ok in light winds outside
CG as recommended seems too far forward I set mine 10 mm further back
Decals for cockpit and rudder still incorrect.
slots are a tight fit except for tail which is too small.
rudder and elevator push roods were too flimsy at the joins to the wire zs I used thin section of carbon rod overlapping join and heat shrink.
Buy a decent prop for it the one supplied lasted one flight and was damaged on landing. Excellent value for money

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I wrote a build review a little earlier. You can see it below for reference to the quality issues. This review is just to say I now have it flying nicely. At first I had trouble trying to get the plane to fly straight and level. The problem turned out to be poor performing servos. The 2.5 g servos I used had very poor centering and resolution. They often responded to smooth stick changes with sudden step changes in position, and had a large "dead band". I am now using 5 g HXT-500 servos and a 7X6 prop. The CG is just slightly forward of the top wing c/f spar. To get the CG I had to mount the 800 mAh 2S battery with the rear of the battery near the bottom wing leading edge. The plane now flys nice and I'm having a ball!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi Guys! I think this motor is to weak for this model....im not sure if is the motor or the prop. Can anyone tell me if there is another motor or prop for it? For 3D flighting ?? Thanks
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The prop is not good, it requieres a 7x5. A problem with stickers not inverted on one side.
But a good parkflyer (without ANY wind) or good for indoor (in a big place...)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I just started the build.

Overall the kit is a good value and looks like it should perform well. Unfortunately, the kits have some errors. That, plus poor instructions makes assembly unnessarily frustrating. My kit had exactly the same problems as Mike's. Wrong size slots, no decals for the rudder and cockpit for the left side, shrink tube too small for tail pushrods. I would add poor instructions and and no landing gear as additional issues.



Mike any flight report yet?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It's a neat little thing. Fly it inside a hall/gym or outside withouth any wind. Thought it would be ok with little wind, but the plane has a flying weight of 216 grams, so best with no wind.
The propeller thats with it is too small. Go with a bigger one. You have to redo all the tape on everything. Also, some of the stickers isn't inverted, so you get two-three pairs of the same sticker.

All in all - cheap - good quality - worth the money!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Combine

essential items and
esc
battery
servo

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.