Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Minim OSD V1.1

Minim OSD V1.1

Discontinued Product

Please continue searching for a similar product.
Gewicht:
20 g
SKU:
387000015
WANT FREE SHIPPING? Click here to find out more!

Dies ist ein Mini Arduino basierte On-Screen-Display Bord. Es ist maßgeschneidert für die Verwendung mit ArduPilot Mega und dem MAVlink Protokoll und gestaltet so klein wie möglich sein.

Es ist Hauptkomponenten ein ATmega328P 8-Bit-Mikrocontroller mit einem Arduino Bootloader sind, und ein MAX7456 monochrome Anzeige auf dem Bildschirm. Die Programmierung erfolgt über einen FTDI-kompatiblen 6-Pin-Kabel.

Es verfügt über zwei unabhängige Strom- und Masseabschnitte an den analogen Stufe des OSD isolieren: eine + 5V Abschnitt für den ATmega und der digitalen Bühne OSD, angetrieben durch das FTDI Kabel oder eine andere + 5V Quelle; und eine geregelte + 5V Abschnitt für die Analogstufe des OSD, angetrieben durch das Video in / out-Header und verarbeiten kann bis + 12V-Eingang.


Eigenschaften:


• ATmega328P mit Arduino Bootloader
• MAX7456 monochrome Anzeige auf dem Bildschirm
• FTDI Kabel kompatibel Pinout
• Standard-6-poligen ISP-Header
• Zwei unabhängige Leistungsteile mit einer LED-Anzeige auf jedem
• Lötbrücken zum Kombinieren der Leistungsteile
• + 5V 500mA Regler für bis zu + 12V Versorgungseingang (5-12V-Bereich)
• Lötbrücke für PAL-Video-Option
• Exposed Testpunkte für HSYNC und LOS

Specs:
Spannung: 5-12V
Maße: 50 x 18 x 10 mm
Gewicht 4g

Bitte beachten Sie die Datei unter der Registerkarte Dateien für Entwickler Credits hochgeladen, Links zu Quellcode und andere Informationen!  

* Hinweis: Dies ist kein Original Arduino Markenprodukt.

  • Artikelbezeichnung 387000015
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 20.00
  • Länge 55.00
  • Breite 20.00
  • Höhe 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great OSD! Fully customizable and programmable. Great value for the price and quality. All fans of flying first person - I recommend.

good OSD, great quality as always

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

good OSD, great quality as always

Good quality.

Works immediately.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality.

Works immediately.

These things are amazing. Someone even figured out how to get FrSky telemetry on this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These things are amazing. Someone even figured out how to get FrSky telemetry on this.

OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

OSD works a treat with APM 2.6. Update the firmware with a ftdi and you have a good osd.

Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cheap and powerful, these will connect to the Naze32, MultiWii, APM, and Pixhawk. Out of the three I've bought, one has succumbed to a voltage spike. This was most likely caused by a crash and not a defect in the product itself. In general, I'm very happy with these.

bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

bought this osd to go with my first MultiWii.

though not setup out the box to work with MW boards (set for APM & PIXHAWK standard) theres tons of simple info and advice available all over the place and as this OSD is long established there are many available firmwares to suit just about any FC out there, Took a noob like me half an hour to flash new firmware via a Ftdi adapter and configure the display before I was out and in the air with my new OSD working a treat. WORTHY OF NOTE(as not mentioned here).... The V1.1 and newer versions DO NOT suffer the same overheat failures that the earlier versions did so the 12v side of the board can now be happily fed with a 12v feed (as was intended)

??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

??????????? ????? ? ???? ???????= ???????? - ??? ???????? ) ?????? ????? ?????? ? ?? ??????? ) ??? ?????? ???????? ) ?? ?????????????? ???????? ???????????? )

Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice Osd with an awesome price! You can have all the information from this little board but be careful if you are a newbie because it requires some skill! It's not plug and fly but once correclty setup it works like a charm. there are a lot of useful videos on how to program and install it.

Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Two units was bought. MCU (not video chip) of the first one fried after two days of usage. After replacement of the dead MCU I have the same problem- inadequate temperature of the MCU. Nevertheless it still working after putting heat sink on the chip.
Second unit works perfectly except one thing: it is impossible to configure it through the serial link as the Tx channel of the OSD is dead. The quality of this product is really disappointing.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
AMP 2.5 back Download [118]
mini OSD connector AMP2.5 Download [102]
4 pins for mini osd AMP2.5 Download [142]
Boxed AMP2.5 Download [125]
battery voltage mod Download [352]
5V connection Download [136]
current sensor Download [348]
OSDs with heatsinks Download [488]
easy way for osd configuration Download [960]
how to fix no overlay and fw upgrade Download [2688]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!