Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

MKS DS1210 Titan Gear Servo (0,12 sec / 10kg-cm)

MKS DS1210 Titan Gear Servo (0,12 sec / 10kg-cm)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
DS1210
WANT FREE SHIPPING? Click here to find out more!

Ausgestattet mit einem Titanium Räderwerk und Wasser / staubdicht versiegelte Gehäuse der MKS DS1210 kann in Wasser, verkrustet im Schlamm oder im Sand vergraben und immer noch kommen wieder für mehr fallen gelassen werden! Perfekt für Trucks und Buggys. MKS Servos sind in Taiwan, Korea und Japan respektiert.

Specs:
Totbereich: 0.002ms (Default)
Steuerung: + Pulse Width Control
Arbeitsfrequenz: 120 Hz
(RX) Erforderliche Impuls: 3,0 ~ 5,0 Volt Spitze - Spitze - Rechteckwelle
Betriebsspannung: 4,8 ~ 6,0 V DC Volt
Betriebstemperaturbereich: -10 bis + 60 Grad C
Arbeitsgeschwindigkeit (4.8V): 0,15 sec / 60 ° Grad bei keiner Last
Arbeitsgeschwindigkeit (6V): 0,12 sec / 60 ° dagrees bei keiner Last
Stall Drehmoment (4.8V): 8,05 kg-cm (292,4 Unzen / in)
Stall Drehmoment (6V): 10 kg-cm (365,3 Unzen / Zoll) 360 °
Modifizierbar Nein
Motortyp: DC Motor
Potentiometer Antrieb: Direktantrieb
Treibertyp: FET
Lagertyp: Doppelkugellager
Zahnrad - Art: Metal Gear
Programmierbare: NEIN
Verbindungsstück- Draht - Länge: 15,0 cm (5,9 Zoll)
Abmessungen: 40X20X40.30 mm (1.5748X0.7874X1.58 in)
Gewicht: 56 g (1,97 Unzen)

  • Artikelbezeichnung DS1210
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 185.0000
  • Länge 0.00
  • Packaging Width 0.00
  • Höhe 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very very good servo on T-Rex 600 or HK600 for cyclic. good torque, good speed, centering very well, and legendary MKS quality for a mini price!

Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought one just to try when it first arrived. Put it in a Traxxas Slash 4x4, and it was a very noticeable upgrade compared to the stock servo. Have run it in pretty harsh conditions, and it seems to take the punishment well. Five stars all round. I just wish it would come in stock again so I could buy more of them.

At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

At first I installed this servo in my Inferno 1/8 buggy steering and it worked great, now I am using it in a Associated B4.1, almost way too much torque and speed. Very recommended.

This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo works great! I am using it as my steering servo for my Losi LST 2. Since the splines on this servo is the same as a futaba I had not problems with the stock servo saver. The only comment have is that the stall torque is listed incorrectly on this site. I am pretty sure @6v it is 138.87oz/in and NOT 365.3oz/in. You should check yourself to make sure.

Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Servo muy rapido, montado en mugen mbx6 dos meses sin problemas. Envio en 3 semanas por air mail normal (envio barato)

Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed one in my Inferno 7.5 buggy and it is really good! Fast, strong and cheap. I recommend for any 1/8 buggy.

I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I'm using these servos on my HK600GT... All i can say is wow. I am impressed they are super fast, super strong and very percise. I will use these on any Heli that I build that can take this size servo.Other servos that have faster specs aren't always fast when there is a load on it. these are so strong the load has no effect on the speed. SUPER SERVO.

I enjoy flying my HK600 better then my real trex helis cause of these.

Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Put 3 of these in a T600 Esp. Need to mod a little bit because they are to long. Nothing hard to do. This servo looks very good, it's strong, quick and not too noisy. They will be perfect for my T600 FBL

Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good vervo on HK600GT cyclic. good torque, good speed, centering well. One of theim makes noise sometimes but no issue so far.

I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this servos from month in my nitro heli - Elyq vision 50 Ultimate on swashplate and they work great. Servos are fast and strong. Execution is in the highest level. Extra advantage is waterproof. Watch this video http://www.youtube.com/watch?v=Wo0ucXOzWJI&feature=player_embedded
I chose those servos because this is best choice for someone who wants best product for lower price. I recomend it for nitro and electric 600 and 700 size heli.
Best Regards
David from Poland

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save