Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

MT60 3 Pole Motor / ESC Steckersatz 12AWG männlich - weiblich (2 Satz)

MT60 3 Pole Motor / ESC Steckersatz 12AWG männlich - weiblich (2 Satz)

Shipped From:
  • USA
  • Global
QTY:

Now save Speichern 0,00 € 0,00 €

2,09 €
Status:
Auf Lager
SKU:
015000190-0
WANT FREE SHIPPING? Click here to find out more!

Der MT60 3 Pole-Motor-Anschluss-Set ist die perfekte Lösung für Ihre Brushless-Motor / ESC-Verbindungen zu sichern. Der Anschluss-Set Merkmale Stecker und Buchsen, die mit 3,5-mm-Kugeln beide ausgestattet sind und mit einem Kabel ordentlich Befestigung geliefert Dinge nett und ordentlich zu halten!

Die Anschlüsse sind aus Einscheiben-Kunststoff gefertigt und bieten einen sehr sicheren Halt sie perfekt für EDF und Multirotor-Anwendungen.

Specs:
Maße: 46 x 12 x 12 mm (montiert)
Gewicht: 9.70g (pro Satz)
Geeignet für: 12AWG Draht (Max)
Farbe: Gelb

  • Artikelbezeichnung 015000190-0
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht 23.0000
  • Länge 75.00
  • Packaging Width 20.00
  • Höhe 30.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Probably not rated to 60A as the name suggests.
I used these to connect the BLDC motor to the ESC on my ebike. An application which should see an maximum average of 35A, after a couple of weeks of use the connection increased in resistance, causing heating of the connector, resulting in the solder joints melting and the wires falling out out mid-ride.

Not a bad connector though. It has the usual issue of the housing tending to melt when sufficient heat is applied to solder a large gauge wire to it, but it's workable. This connector is significantly more bulky than the standard 3x bullet connector approach.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Probably not rated to 60A as the name suggests.
I used these to connect the BLDC motor to the ESC on my ebike. An application which should see an maximum average of 35A, after a couple of weeks of use the connection increased in resistance, causing heating of the connector, resulting in the solder joints melting and the wires falling out out mid-ride.

Not a bad connector though. It has the usual issue of the housing tending to melt when sufficient heat is applied to solder a large gauge wire to it, but it's workable. This connector is significantly more bulky than the standard 3x bullet connector approach.

Sehr passgenaue Verbinder. Ohne Grat, so dass Nichts nachgearbeitet werden muss. Ein MUSS fr jede RC-Werkstatt.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr passgenaue Verbinder. Ohne Grat, so dass Nichts nachgearbeitet werden muss. Ein MUSS fr jede RC-Werkstatt.

they never disappointed me. never failed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

they never disappointed me. never failed.

aiutano a fare un po' di ordine tra tutti quei fili!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

aiutano a fare un po' di ordine tra tutti quei fili!

very good quality connectors,use these on all of my models depending of the amps from the motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good quality connectors,use these on all of my models depending of the amps from the motor

Great power transfer with very little resistance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power transfer with very little resistance.

I find this the easiest way of connectiong ESCs and motors the female MT60 on the ESC side, and 3.5mm bulletts on motor wires.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I find this the easiest way of connectiong ESCs and motors the female MT60 on the ESC side, and 3.5mm bulletts on motor wires.

Sehen gut aus Praxis Test fehlt noch

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehen gut aus Praxis Test fehlt noch

Work well and makes changing motors easy. Instead of using the end covers that make them look bulky I just used heat shrink as I feel it is also safer as it will stop any short circuits and destroying your speed controller.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Work well and makes changing motors easy. Instead of using the end covers that make them look bulky I just used heat shrink as I feel it is also safer as it will stop any short circuits and destroying your speed controller.

Great units for boats and for people swap motors from model to model.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great units for boats and for people swap motors from model to model.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!