Registrieren

Product Finder

Einstellungen

Useful links

 
[["US","AU","GB","DE"]]
Registrieren
Shipped From:
  • Global

Multistar 2206-2150KV Motor Das "Baby Beast"

Multistar 2206-2150KV Motor Das "Baby Beast"

QTY:

Now save Speichern 0,00 € 0,00 €

11,30 €
Stock:
Gewicht:
82 g
SKU:
9192000151-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Product
Description

Der Suche nach dem ultimativen Power-System für Ihre nächste Multi-Rotor-Projekt? Suchen Sie nicht weiter!
Die Turnigy Multistar outrunners sind mit einer Sache im Auge - Multi-Rotor Leistung zu maximieren! Sie verfügen über High-End-Magneten, hochwertige Lager und hohe Polzahlen für weniger Lärm, glatte, reaktionsschnelle Leistung und höhere Effizienz. Sie verfügen über benutzerdefinierte Motormontage, und alle sind Präzision für reibungslosen Ablauf ausgeglichen, diese Motoren für den Einsatz mit mehreren Rotoren speziell dazu entworfen sind und nicht auf Basis von Flugzeugmotoren.

Die 2206-2150KV Multistar die "Baby Beast" genannt, ist das Monster Motor für die kleinen 250 Klasse Quadrocopter! Vorgesehen für 5 oder 6-Zoll-Requisiten, hat diese Motorleistung vom Fass, und bereit für Ihren voll beladen 250. Der Motor in den richtigen Stellen für FPV Haltbarkeit, mit 3,17 mm Mittelwelle, 11mm Propellerflansches und einem 5 mm aufgepeppt wurde Kardanwelle, gibt es keine Notwendigkeit, über die gelegentlichen Baum im Weg zu kümmern. Es ist mit Legte und vorbelastete Lager und hochwertige Silizium-Drähte ausgestattet. Wenn Sie sich für mehr Leistung, Haltbarkeit und Wert für Ihre Unter 300mm Acromodelle suchen, denken .... Multistar 2206 der Baby-Tier

Multistar vereinfacht die Welt der Multi-Rotoren mit ihren Zweck Produktlinie gebaut und nehmen die Vermutung ausarbeiten von Ihrem Setup.

* Anmerkung: untere Befestigungsschraubenlänge ist entscheidend , um zu überprüfen. Die abgesenkte Gehäuse in der Höhe reduziert wurde eine schöne kompakte 2206 zu machen, ist der Kompromiss der Motorwicklung auf den Boden näher ist, so übermäßig lange Befestigungsschrauben könnten möglicherweise die Wicklungen in Verbindung treten und den Motor beschädigen.

Specs:
KV (RPM / V): 2150
Lipo - Zellen: 2 ~ 3s
Max Leistung: 120W
Max Ampere: 10A
Abmessungen (Dia.xL): 27 x 17 mm
Motorwelle: 3,17 mm (5 mm Kardanwelle)
Kardanwelle: 5mm
Gewicht: 30g
Bolt Lochabstand: 16mm * 19mm
Anschlüsse: 2 mm Kugel

Product
Specifications

Zusätzliche Information

  • Artikelnummer:
    9192000151-0
  • Brand:
    MultiStar
  • Gewicht ( g)
    82.00
  • Länge
    100.00
  • Breite:
    50.00
  • Höhe:
    80.00
  • Kv (rpm / v)
    2150.00
  • Max Currents (A)
    10.00
  • Leistung ( W):
    120.00
  • Länge B (mm):
    17.00
  • Kann Länge D (mm)
    7.00
  • Max Spannung (V)
    12.00
  • Welle A ( mm):
    5.00
  • Unit Weight (g):
    30
  • Durchmesser C (mm)
    28.00
  • Gesamtlänge E ( mm)
    34.00
  • Widerstand ( mh):
    0.00
Community
Discussions
Rate&
Review

Schreiben Sie Ihr eigenes Review

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
i Did not try it so far. But be careful:

The specs in the Description say 18 Amps 3-4 S.

The Spec Table says 10 Amps and 2-3 S (which is what the Package says as well.) No Mount ( M3.0 are needed i guess).
Update once i instelled it.




Quality
Value
Overall
Quality
Value
Overall
Let me just say that hobbyking makes good products. Motors run great and the price was good. Then while doing a checkout run on my new quad it turned into a 3 bladed lawn dart. Problem? The set screws on the motor were not installed. Glue for the screws lasted long enough to get in the air untill under stress. QC dropped the ball on me.
Quality
Value
Overall
Quality
Value
Overall
Ordered 4 of them, two came with noisy ball bearings, reflecting on a lot of vibration in the fpv video recording
the bad : poor quality control (ball bearings).
the good : runs warm with 6x4.5 , 3s battery, powerfull
Quality
Value
Overall
Quality
Value
Overall
Great motor with cool design and unstable quality. Ordered 5 of them. Two came disbalanced. One was rotating with noise because plastic clip inside the motor body which holds incoming wires was not in place, dont know how to repair it. Beasts are working with Red Brick 10A ESC (flashed Wii-ESC) at 2S and 3-blade GWS6030 just fine . My quad is almost happy with them, but still vibrating a lot. Will buy more with hope that they will come without defects.
Quality
Value
Overall
Quality
Value
Overall
As stated on video they don't actually work with the afro12a v3. Not sure if the afro need firmware update but has de-sync problems. If you do buy this motor with the recommended afro 12a esc make sure you also order the afro esc programmer.
Quality
Value
Overall
Quality
Value
Overall
Really very good quality. Best choice for 250 class multi copter
Quality
Value
Overall
Quality
Value
Overall
They got a good punch on a Laser230 frame and are decent value for the money, but need quite a bit of balancing. Still, a real nice choice for micro quads.
Quality
Value
Overall
Quality
Value
Overall
I got these motors. Running 3S 2200 30C battery with 5X4.5 3 blade props on the low slung 250. The motors are strong come down barely warm. I wish HK would sell them in a kit with two CW and CCW. I had been flying for a while then finally had one of my prop nuts back off resulting in a catastrophic crash broke the frame. I did put red lock tight on the nut, a guess not enough. This time I'm going to get nylock nuts and tie thread around props so they cant spin off. If you run these motors the motors that spin CW will tend to unscrew the prop nut. So M1 and M3 need to double nut lock tight or make sure the nut stays on double check every now and then.
Quality
Value
Overall
Quality
Value
Overall
Great little motors. I used them as an upgrade on my FPV250 V2 as I was tired of using 5x3x3 or 5x3x4 props with the stock motors. These swing a 5x3 prop nicely, plenty of power. Could probably even prop up to a 6x4 as these come down cool after a 5 minute flight.
Quality
Value
Overall
Quality
Value
Overall
A little heavy motors, but great perfomance. Running at 3S with a 500 gr self design quad, they work fine, smooth and powerfull. Recomended only to heavy microquads with rigid frame
Quality
Value
Overall
View all reviews
Upload
Videos
  • MultiStar 2206 Motor

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Produkttags

Verwenden Sie Leerzeichen um Tags zu trennen. Verwenden Sie Apostrophe (') für Phrasen.