Neue Produkte Forum
Registrieren

Total Price

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

Multiwii und Megapirate AIO Flight-Controller w / FTDI (ATmega 2560) V2.0

Multiwii und Megapirate AIO Flight-Controller w / FTDI (ATmega 2560) V2.0

Discontinued Product

Please continue searching for a similar product.
Gewicht:
45 g
SKU:
387000007
WANT FREE SHIPPING? Click here to find out more!

Dieses Board verfügt über eine mehrere serielle Schnittstelle sowie eine dedizierte I2C-Schnittstelle. Sie können nun in einem GPS-Stecker direkt, und Sie haben noch zusätzliche Ports für weitere externe Geräte. Zusätzlich zu diesem hat die neuen ATmega 2560 mehr IO-Pins, so dass es sowohl das PWM-Signal aus dem Receiver ausgelesen und es hat genug PWM-Ausgänge, die WSR direkt ohne die Notwendigkeit zu steuern, das PWM-Signal in der Software zu tun.

Dieser Controller sogar einen MicroUSB-Anschluss direkt auf dem Brett hat, keine Notwendigkeit, eine zusätzliche FTDI-USB-Schnittstelle anschließen.

Die Motion-Sensing-Seite verfügt über eine neue Generation MEMS Gyro, ein MPU6050 von InvenSense, die den MEMS-Gyro / Beschleunigungs-Sensor auf einem einzigen Chip. Es gibt auch eine 3-Achsen-Magnetometer und ein Barometer-Sensor mit einer Auflösung von 0,01 Millibar - ca. 10 cm Höhenunterschied.

Sie interessieren sich für GPS-Funktionalität? Nun ist dies eine der kostengünstigsten Möglichkeiten, um loszulegen - fügen Sie einfach einen 10Hz GPS-Modul (in Kürze) und du bist gut zu gehen!



Eigenschaften:
• Unterstützte MegaPirateNG und MultiWii Firmware
• Bis zu 8-Achsen-Motor Ausgang
• 8 Eingangskanäle für Standard-Empfänger
• 4 serielle Ports für debug / Bluetooth-Modul / OSD / GPS / Telemetrie
• 2 Servos Ausgang für System Nick- und Wankbewegungen Gimbal
• 1 Servoausgang eine Kamerataste auslösen
• 6 Analogausgang für verlängern Gerät
• Ein I2C-Anschluss für verlängern Sensor oder Gerät
• Getrennte 3.3V und 5V-LDO-Spannungsregler
• ATMega 2560 Mikrocontroller
• MPU6050 6-Achsen-Gyro / Accel mit Motion-Processing Unit
• HMC5883L 3-Achsen Digitalmagnetometer
• MS5611-01BA01 hochpräzise Höhenmesser
• FT232RQ USB-UART-Chip und Micro USB-Buchse
• An Bord Logikpegelwandler



Flugmodus für Multiwii:
• Eines der folgenden grundlegenden Modi
- Acro
- Ebene
- Alt Halten
- Heading Lock

• Optional Modus
- Headfree (Carefree)
- GPS Hold (Need GPS-Empfänger)
- GPS Zurück zur Ausgangsposition (Need GPS-Empfänger)



Flugmodus für MegaPirate:
• Acro
• Alt Halten
• Loiter (nutzt GPS)
• Geführte (nutzt GPS)
• Position (nutzt GPS)
• Kreis (nutzt GPS)
• RTL (nutzt GPS)
• Auto (verwendet GPS)
• Follow Me (nutzt GPS)

Größen:
Dimension: 50mmX50mm
Höhe: 11,6 mm
Befestigungslochabstand: 45 mm
Lochdurchmesser: 3mm
Gewicht: 14,2 g

Eingeschlossen sind:
1 x AIO PRO FC
3 x 3 Pin zu 1Pinx3 Kabel 100mm
1 x 3Pin auf 3Pin Kabel 100mm
1 x Molex 1.25mm 4Pin Kabel 100mm
1 x Molex 1.25mm 6Pin Kabel 100mm
1 x Molex 1.25mm 8Pin Kabel 100mm

  • Artikelbezeichnung 387000007
  • Brand -
  • Kapazität ( mAh) -
  • Gewicht ( g) 45.00
  • Länge 115.00
  • Breite 25.00
  • Höhe 95.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Pretty good, has all the sensors and lots of ports to plug pretty much everything. Not recommend for a small quad, but perfect for 400 experimental multirotors. Had some problems with serial3, when all other ports are busy it drops the speed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Pretty good, has all the sensors and lots of ports to plug pretty much everything. Not recommend for a small quad, but perfect for 400 experimental multirotors. Had some problems with serial3, when all other ports are busy it drops the speed.

Can not believe the sale price!!!! Picked up a few to go with my new colors!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Can not believe the sale price!!!! Picked up a few to go with my new colors!

Great fc for people that want to get into gps and open source fc's. This board is all inclusive at a great price. Will except a wide range of accessories with great community support.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great fc for people that want to get into gps and open source fc's. This board is all inclusive at a great price. Will except a wide range of accessories with great community support.

Very good board with ATmega 2560, full of features and expansion possibilities. Great!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good board with ATmega 2560, full of features and expansion possibilities. Great!

Amazing features with so many interfaces. Was able to update firmware using only mission planner only. Had it running Megapirate in under 5 minutes. included cables are also a bonus. Do wish there was more documentation though

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Amazing features with so many interfaces. Was able to update firmware using only mission planner only. Had it running Megapirate in under 5 minutes. included cables are also a bonus. Do wish there was more documentation though

I have bought two of these now and absolutely love them! Both projects were hex copters. Gps is easy to attach, I recommend the NEO-6M GPS Module.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have bought two of these now and absolutely love them! Both projects were hex copters. Gps is easy to attach, I recommend the NEO-6M GPS Module.

easy to flash with the Megapirate Flash Tool, works great in my Plane

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

easy to flash with the Megapirate Flash Tool, works great in my Plane

I have this for almost 6 months and still haven't discovered all of the options. So far I've connected: bluetooth (must have), OLED (sold - no use for it), telemetry, GPS, minimOSD. USB port is well soldered - no problem with it.
Very good sensors - compass needs to be far away from ESC, barometer needs thick foam glued on. Default MW PIDs work with most X and frames. AltHold needs tuning, but that's another story.
All in all - great product, worth it's price. APM has nothing on it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have this for almost 6 months and still haven't discovered all of the options. So far I've connected: bluetooth (must have), OLED (sold - no use for it), telemetry, GPS, minimOSD. USB port is well soldered - no problem with it.
Very good sensors - compass needs to be far away from ESC, barometer needs thick foam glued on. Default MW PIDs work with most X and frames. AltHold needs tuning, but that's another story.
All in all - great product, worth it's price. APM has nothing on it.

Excellent quality and price, full of features and expansion possibilities.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Excellent quality and price, full of features and expansion possibilities.

Very impressed by this board! I flashed it with MegapirateNG, connected a GPS receiver (uBlox Neo 6) and a Bluetooth module.

Flying goes very well! Also altitude hold & loiter are handled perfectly by this board. I recommend buying the Bluetooth module as it makes configuring a lot easier, with e.g. an Android phone or tablet.

If you're a beginner: this might be a bit too difficult to start with. Maybe the KK2.1.5 is a better choice in that case.
If you are experienced and you want to move on: this is definitely the board for you. Be aware that you need a bit of computer skills (compiling the Arduino code), but when you have everything up and running, this is an amazing piece of hardware!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very impressed by this board! I flashed it with MegapirateNG, connected a GPS receiver (uBlox Neo 6) and a Bluetooth module.

Flying goes very well! Also altitude hold & loiter are handled perfectly by this board. I recommend buying the Bluetooth module as it makes configuring a lot easier, with e.g. an Android phone or tablet.

If you're a beginner: this might be a bit too difficult to start with. Maybe the KK2.1.5 is a better choice in that case.
If you are experienced and you want to move on: this is definitely the board for you. Be aware that you need a bit of computer skills (compiling the Arduino code), but when you have everything up and running, this is an amazing piece of hardware!!!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
Customer files
Conecting external devices Download [300]
Manual - Multiwii and Megapirate AIO FC Download [436]
MPNG documentation Download [40]
MegapirateNG 3.0.1-R3 Anleitung Deutsch Download [345]
PID settings H550 V2 Glass Fiber Hexcop Download [129]
Crius Download [395]
Multiwii Download [436]
Code Download [14]
step by step Multiwii and MegaPirate(bla Download [949]
micro quad 140mm+AIO fc Download [1276]
  1. 1
  2. 2
  3. 3
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save