Lieferant werden Blog Neue Artikel
Registrieren

Gesamtpreis

0,00 €

Warenkorb 0 Warenkorb 0 Loading...

NTM Prop-Antrieb 28-36 1000KV / 400W Brushless Motor

Generating Links

NTM Prop-Antrieb 28-36 1000KV / 400W Brushless Motor

Preis:

Now save speichern 0,00 € 0,00 €

26,97 €
Bereits gekauft Discontinued Product

Please continue searching for a similar product.
SKU:
NTM2836-1000
Kostenloser Versand? Klicke hier um mehr zu lernen!

NTM Prop Antriebsmotoren sind solide Leistung outrunners mit engen Windungen, Qualitätslagern, richtig bewertet Magneten ausgeglichen Stator und Fluxringe plus sie sind QC auf 14 Punkte überprüft, von Materialbearbeitung den ganzen Weg bis zur endgültigen Dyno-Test.
Weil wir diese Motoren komplett in-house (von 3D / 2D-Zeichnung zu Materialbeschaffung, Bearbeitung, Balancieren, Endmontage und Dyno) entwerfen und bauen können wir vollständig Produktion steuern und Produktkonsistenz vom Entwurf bis zum Versand des Produkts an Sie zu gewährleisten. Die Entfernung der mittleren Männer hat dazu geführt, wir besseren Wert auf den Markt und Einzelhandel diese Motoren im Werk (unsere) Preise fahren kann! Alle Performancedaten sind real und auf unseren eigenen Motor dynos getestet.

Unsere QC-Ingenieure überprüfen und jeden Motor ausgleichen, bevor mit dem HobbyKing.com Lager lieferbar.

Specs:
Modell: NTM Prop - Antrieb Serie 2836 1000kV
Kv: 1000rpm / v
Pole: 3
Motor Wind: 14T
Max Strom: 30A
Max Leistung: 400W
Schaft: 4mm
Gewicht: 89 g
ESC: 30 ~ 40A
Zellenzahl: 3s ~ 4s Lipo
Bolzenlöcher: 16mm & 19mm
Bolzengewinde: M3
Anschluss: 3,5 - mm - Kugel-Anschluss

Prop Testdaten:
11x7E - 11.1V / 220W / 20A / 976g Schub
11x7E - 14.8V / 412W / 27.7A / 1.485kg Schub
12x6E - 11.1V / 215W / 20A / 1.08kg Schub
12x6E - 14.8V / 430W / 29A / 1.42kg Schub
13x4E - 11.1V / 223W / 20A / 1.06kg Schub
13x4E - 14.8V / 400W / 27A / 1,48 kg Schub

Hinweis: Ein Zubehörpaket für diesen Motor zur Verfügung steht. Bitte beachten Sie die zugehörige Artikel unten.

  • Kv (rpm / v) 1000.00
  • Max Current (A) 30.00
  • Widerstand ( mh) 0.00
  • Max Spannung (V) 15.00
  • Leistung ( W) 400.00
  • Welle A ( mm) 4.00
  • Länge B (mm) 36.00
  • Durchmesser C (mm) 28.00
  • Kann Länge D (mm) 25.00
  • Gesamtlänge E ( mm) 56.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Video hochladen

Registrieren Sie sich bitte, um Videos hochzuladen anmelden oder Registrieren

Themen
Sortieren nach
Neueste Themen
* Nickname:

* Deine Antwort:


Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Abbrechen
Senden
Poste ein neues Thema
* Nickname:

* Dein Thema:



Geben Sie den im Bild gezeigten Text in das Feld unten ein
*Verifizierungs-Schlüssel:
Beitragsthema

Registrieren Sie sich bitte, um Bewertungen zu schreiben anmelden oder registrieren

Kaisar | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Sep 15, 2016

I do NOT suggest this motor for a fixed wing plane!!!
The 3 pole configuration make it accelerate very very very slowly, initially I thought that the esc is faulty... also try to change timing since the auto does not work very well in some controllers (2-3Amps more). Keep in mind that "big" size props are needed in order to give sufficient thrust or airspeed (other 1000kV motor need significantly smaller props). Fitting a "huge" 11/7 or 12/6 is the way to go on 3s, but you only get 14-15A.
Disappointing performance on a Hobbyking /Hyperion ENIGMA the plane was flyable but did not have the speed/power for maneuvers, or to handle windy conditions.
On the other hand built quality is good, total weight including prop and base mount is 101gr
Maybe in a multirotor this motor will give better results...

HamOp | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Sep 13, 2016

I'm using this one for my Dragonfly 1800 with stock propeller, works great and power is plenty with 3S.

mase60 | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 11, 2016

I to have used this motor with a Phoenix 2000 glider 225 watts using a 10/6 prop motor does get warm but really pulls the glider around so I going use sub-trim to cut the throttle back a tad to under 200 watts using my watt meter.Very happy with this motor worked out of the box.

justin | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Jun 22, 2016

No way to attach propeller, completely useless!

Looks like a prop hub could be bolted on, shame it wasn't included with the motor. Swapped shaft around, no good.

john evans | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Mar 13, 2016

purchased two of these first one on test bed with 11x7 prop would not go above 1/3 revs before shutting down. tested speed controller on another motor works fine. will spin up a smaller ie 9x5 no problem. Second motor was tested in the same way a about 1/3 revs the whole motor shot apart breaking the shaft. Either the clip on the back came off or it was missing in the first place fitted new shaft it will run but very rough indicating to me it shot a bearing coming apart. In the throws of sending them back or throwing them in the bin and consider lesson learnt.

Heli-Player | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 10, 2016

Motor ist ein Hitzkopf, Leistung wird in Wrme umgewandelt, nach 5 Flge bereits eine schwarze Wicklung und Temperaturen die den Magneten schadet. Keine Kaufempfehlung

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 09, 2016

Profitant d'une offre promotionnelle de Hobby King, j'ai achet? ce moteur de tr?s bonne qualit? au prix imbattable de 7?30 soit ? 50pcnt de son prix de vente normal.

Il est pr?vu d'?tre mont? sur un Fun-Fly de 1m20 est d'un poids de 1.2Kg, au vu des essais de traction fourni dans les commentaires sur le moteur cela devrai me donner un bon rapport poids/puissance

Phillip | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Customer Rated

Aug 16, 2015

Purchased two of these motors, the 1000kv and a 1400kv for a 2 meter glider. The ratings are a bit overstated, try it and find out the hard way. Hot motors melting insulation, etc. But my biggest gripe is the bearings and end float. The 1000kv on test sheared it's shaft due to vibration at half throttle the prop narrowingly missing my face. Replaced the motor with 1400kv version. Vibration again. Changed folding prop set up to verify what was causing the problem. Definitely the motor. No impressed and wasting my time. Have since purchased Turnigy 28mm XP series. Hopefully these will perform.

| Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 01, 2015

A really good motor. There aren't any problems. Still use it.

Andrew Barclay | Verifizierter Käufer

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 06, 2015

Bought this for my Phoenix 2000 glider. Using the stock 10x6 prop, blueseries 30A ESC and 1500 3S battery I got the following results;

22 Amps

11.4 Volts

250 Watts

A bit high on the amps and the motor does get quite hot but it performs well and propels the glider with ease.

  1. 1
  2. 2
  3. 3
Kundendateien
No File Name Download [2139]
No File Name Download [293]
NTM Prop Drive Series 2836 Download [195]
Datei hochladen

Registrieren Sie sich, um Dateien hochzuladen.
Bitte anmelden oder registrieren um jetzt Hobbyisten zu helfen!

Zubehör